Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

JTAG Programmer, for all COMPEX boards WPj558 / WPJ531 / WPJ 344 / WP543 / WPE72 / WP546 / WP54 / WPP54 / WP18 / NP18. Jtag Programmer can be used to load in your loader and firmware.

Serial Converter, for all COMPEX boards - WPJ558/ WPJ531/ WPJ344/ WP543 / WPE72 / WP54 / WPP54 / WP18 / NP18 . Serial Converter can be used to debug the serial output messages.

WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot

Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now

775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac

• Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
• 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
• 128MB System Memory
• 16MB NOR Flash
• 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
• Supports Dynamic Frequency Selection (DFS)
• Single SIM Holder on-board
• Support 2 x Gigabit Ethernet Port

Applications : 

• 802.11g/n + 802.11a/n/ac Access Point

• Point-to-MultiPoint High Capacity Wireless Bridge

• Wireless Customer-Premises Equipment (CPE)

WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.

Power solution :

DC Jack: 12-24V

PoE: IEEE 802.3af 48V,

IEEE 802.3at 56V,

or Passive PoE 36-56V DC

Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount

Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).

Work with WP54, wp543 and new LV series of router boards.

SALE !!!

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Indoor enclosure with Onmi Antennas

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■  Support Wallys’ PCBA Mainboar DR4029, DR4028

Outdoor box with WiFi Antennas 

■  2 x5G Antenna directional

■  PCB Antenna

■ 16dBi max gain

■  DRA25  2,4GHz omni antennas are optional to connect using N-type pigtails (not included in - optional)

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!