Embedded Wireless Boards
11ax and 11ac ready Wireless CPU Embedded boards, Qualcomm Atheros based, PCBA, LEDE - OpenWRT supported (ath10k ath11k).
Dual radio solution for 11n + 11ac and new 11ax dual concurent 2,4GHz + 5GHz wifi 5 and wifi 6 !! Now we support 4G 5G LTE modules / LTE gateway or hotspot
-
COMPEX Passive POE+ (injector + psu) 24V/1A 7P24V30WEU
$16.00
Special Price $12.00
Passive POE, 24V/1,2A/30W Standard POE , works with all COMPEX BOARDS. Recommended for dual radio slot boards like WP543HV and WP546HV Learn More -
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More -
CPX Gigabit Power over Ethernet (PoE) PoEGP2408 24V
$19.90
Special Price $15.00
COMPEX POE GP2408 24V/0,8A gigabit passive POE mainly for LV (low Voltage) router board versionsGigabit Power over Ethernet (PoE)Compex Gigabit Power over Ethernet Injector adapter (PoEGP2410) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices. No need to buy a PoE switch—use existing open ports from a non-PoE switch to network PoE devices. This will save you a tremendous installation cost in terms of time, material and labor. This compact device keeps the Ethernet device fully protected against any circuit shortage caused by wrong pin assignment or cable damage with short circuit protectionLearn More -
CPX MJE2.4N11 Outdoor Enclosure with 11dBi MIMO antenna 2,4GHz
$25.00
Special Price $19.00
Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Learn More
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount -
CPX Pasive POE+ FE2405EU (injector) 24V/0,5A for LV series+
$9.90Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).
Work with WP54, wp543 and new LV series of router boards.
SALE !!!
Learn More -
DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6
$149.99DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support
Samples are available now! OpenWRT firmware and OpenWiFi supported
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.
Learn More -
DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys
$139.00Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board
2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz
■ SMA Plug interface ■ Plastic rod of black
■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029
Dimension: 132x 119 x 34 mm
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
-
DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT
$165.00Description
DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface
■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm
■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
Learn More -
DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT
$149.00DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported
2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface
■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm
■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard
Learn More -
DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi
$89.00IPQ 4019 / 4029 Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board
- Featuring with industrial-grade IPQ4019/IPQ4029 chipset
- Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module
- Support 4.940GHz to 5.825GHz Frequency Range
- Support 2.400GHz to 2.482GHz
- Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
- Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
- Support 11ABGN/AC
- RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
- FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
- Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
- USB 3.0 support ! miniPCIe LTE-A module supprted !
-
Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!
-
DR5G17 17dBi Dual Polarized Micro strip Antenna Array 5GHz MMCX connector 802.3 11AX/AC/AN RoHS compliance, Wallys
$27.001. Feature * 17dBi Dual Polarized Micro strip Antenna Array * 5GHz of frequency * MMCX connector * Support 802.3 11AX/AC/AN * RoHS compliance 2. Application * 5GHz Wireless Communication * WLAN device, WLAN Router, e.g., AP, PIC Wireless Card 3. Description This antenna array is designed for 5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency. Learn More -
DR6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6. Wallys
$119.00DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports
Samples are available now! OpenWiFi and OpenWRT firmware supported.
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.
Learn More -
Dream 5018 M 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys
$89.00Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot
Samples are available now!
11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support
Dual-core ARM 64bit A53@1.0GHz Processor
1G DDRL3L System Memory
8MB NOR Flash, 256MB NAND Flash
2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate
M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;
M.2 Card Slot for QCN9074 WIFI 6E Card
M.2 Card Slot for QCN6122-6E Card
M.2 Card Slot for QCN6102-5GCard
Support Openwifi
DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card.
Learn More -
Dream 5018 S 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys
$89.00DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot
Samples are available now!
11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support
Features:
Dual-core ARM 64bit A53@1.0GHz Processor
512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash
2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate
Support BT5.1
M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;
M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot
POE 802.3 bt,at,af support
Support Openwifi
Product Description
DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment
Learn More -
Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$22.00DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module
Works only with DR518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6102 5GHz, max 23dBm per chain, up to 2402Mbps Single Band 5 GHz 2x2 WiFi 6E 802.11ax 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More