Currency:

Embedded Wireless Boards

Embedded Wireless Boards

11ax and 11ac ready Wireless CPU Embedded boards, Qualcomm Atheros based, PCBA, LEDE - OpenWRT supported (ath10k ath11k).

Dual radio solution for 11n + 11ac and new 11ax dual concurent 2,4GHz + 5GHz wifi 5 and wifi 6 !! Now we support 4G 5G LTE modules / LTE gateway or hotspot

Position
Set Descending Direction

Grid List

15 per page

5 Item(s)

  1. COMPEX P-Serial Converter + cable from PC to serial for boards with serial console

    $27.90

    Serial Converter, for all COMPEX boards - WPJ558/ WPJ531/ WPJ344/ WP543 / WPE72 / WP54 / WPP54 / WP18 / NP18 . Serial Converter can be used to debug the serial output messages.

    Learn More
  2. Compex P-JTAG Programmer + cable for router boards with JTAG interface

    $29.90

    JTAG Programmer, for all COMPEX boards WPj558 / WPJ531 / WPJ 344 / WP543 / WPE72 / WP546 / WP54 / WPP54 / WP18 / NP18. Jtag Programmer can be used to load in your loader and firmware.

    Learn More
  3. COMPEX Passive POE+ (injector + psu) 24V/1A 7P24V30WEU

    $16.00

    Special Price $12.00

    Passive POE, 24V/1,2A/30W Standard POE , works with all COMPEX BOARDS. Recommended for dual radio slot boards like WP543HV and WP546HV Learn More
  4. CPX Pasive POE+ FE2405EU (injector) 24V/0,5A for LV series+

    $9.90

    Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).

    Work with WP54, wp543 and new LV series of router boards.

    SALE !!!

    Learn More
  5. CPX Gigabit Power over Ethernet (PoE) PoEGP2408 24V

    $19.90

    Special Price $15.00

    COMPEX POE GP2408 24V/0,8A gigabit passive POE mainly for LV (low Voltage) router board versions
     
    Gigabit Power over Ethernet (PoE)
    Compex Gigabit Power over Ethernet Injector adapter (PoEGP2410) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices. No need to buy a PoE switch—use existing open ports from a non-PoE switch to network PoE devices. This will save you a tremendous installation cost in terms of time, material and labor. This compact device keeps the Ethernet device fully protected against any circuit shortage caused by wrong pin assignment or cable damage with short circuit protection
    Learn More
Position
Set Descending Direction

Grid List

15 per page

5 Item(s)