Gateways & 4G 5G LTE Routers
Gateways & 5G / 4G LTE Cellular Routers and modem modules with LTE-A support , CAT 16, CAT12, CAT6, CAT4 and new CAT20 supported !!
-
Mediatek MTK 7621 High performance Outdoor router H721 O, Dual SIM with 5G NR LTE-A & WiFi possibility, 1x LAN 1x WAN, 4x antena 1x M.2 USB3, 1x MiniPCIe, good outdoor enclosure, OpenWRT
$169.00Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported
After makeing H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master
https://openwrt.org/toh/hwdata/dual-q/dual-q_h721
Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721O 5G NR outdoor version now includes:
-
outer board*1; water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G
Hardware:
MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
1x M.2 b.key USB 3.0 as 5Gnr interface,
1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)
2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)
Lightning protection design
Heat sink at botoon of 5Gnr modem
NEW X-WRT firmware available !!!
-
-
4G LTE router ZBT WG3526 MT7621 880MHZ 1200Mbps 5x1GB 1xUSB 3.0 1×SIM 1×SD 1× SATA 3.0 IEEE802.11AC/N/G/B/A SDK 4.2
$59.00WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so onWireless:
Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
Software:
Preload the OpenWRT.
Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
Internet router and SMB router.With Modem Function: YES - but you need to buy LTE module separately compatible for yoru region. Quectel EC25, EP06, EM06, EM12, EM16 and more supported.
Learn More -
DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi
$89.00IPQ 4019 / 4029 Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board
- Featuring with industrial-grade IPQ4019/IPQ4029 chipset
- Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module
- Support 4.940GHz to 5.825GHz Frequency Range
- Support 2.400GHz to 2.482GHz
- Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
- Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
- Support 11ABGN/AC
- RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
- FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
- Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
- USB 3.0 support ! miniPCIe LTE-A module supprted !
-
Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!
-
Quectel RM500Q-AE 5G NR global module 3GPP Release 15 NSA/SA operation, Sub-6 GHz M.2 socket
$229.005G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA
This version is replaced by newer version RM502Q-AE , please use this newer better versionQuectel RM500Q is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel. 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM500Q is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and Cat 16, Cat 18, Cat 20 module EM20, which will facilitate customers to migrate from LTE-A to 5G.5G NR: 3GPP Release 15 NSA/SA operation, Sub-6 GHzNSA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79SA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79DL 4 × 4 MIMO n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79UL 2 × 2 MIMO n41LTELTE Category DL Cat 16/ UL Cat 18LTE Bands B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/ B25/B26/B28/B29/B30/B32/B34/B38/B39/B40/B41/B42/ B43/B46(LAA)/B48/B66/B71DL 4 × 4 MIMO B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/ B42/B43/B48/B66UMTSWCDMA Bands B1/B2/B3/B4/B5/B6/B8/B19Embedded GNSS SupportedPCIe 3.0 Interface SupportedUSB 3.1 Interface SupportedeSIM Supported / Built-in eSIM (optional)Region GlobalCertification in progress: Carrier: AT&T*/ T-Mobile*/ Verizon*/ NTT DOCOMO*/ Telstra* Regulatory: GCF*/ PTCRB*/ CE/ RCM/ IC*/ FCC*/ JATE*/ TELEC*Learn More -
5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE
From: $155.50
To: $2,715.46
Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform).
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html
New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design for Sierra wireless EM919x EM7690 Telit FN980 Thales MV31 Quectel RM500, RM502, RM520, SIM slot
$52.00USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel & Simcom Modem.
- Support 52mm,50mm,42mm length three size of 5G M.2 Modem.
- Introduce integrated aluminum heat sink,make your 5G modem always cool.
- Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
- 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
- Adjust output to 3.7V. Prevent voltage drop when high data transfer .
- Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
- Use Nano SIM card slot , support hot swap simcard.
- ESD prtection at USB and SIM slot.
- Better performance, because of fast thermal module
-
MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT
$139.00Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.
The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) .
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys
$139.00Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board
2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz
■ SMA Plug interface ■ Plastic rod of black
■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029
Dimension: 132x 119 x 34 mm
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt
-
DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT
$165.00Description
DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface
■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm
■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
Learn More -
LTE 5G M2 NGFF to type-C USB 3.0 dongle for most M.2 interface 5G modules, GT5G-CV
$49.90GT5G-CV M.2 NGFF TO Type-C USB 3.0 dongle - total New design for latest 5Gnr M.2 Modems
Key Features
Compatibility is strong - Compatible with most M.2 interface 5G modules
Industrial - Industrial grade material design
USB Type-C 3.0 - USB Type-C 3.0 high speed interfaceCompatible with most M.2 interface 5G modules
Learn More
Special shield cover protection design to protect key devices from external force damage, corrosion aging
Nano SIM Card slot
No driver required, plug and play
Led indicators let you know your connection status immediately -
ZBT WE1026-5.8G Vehicle Wireless 4G LTE Router , dual ban WiFi 2,4 + 5GHz, can support Quectel miniCPIe LTE-A modules
$59.99WE1026 is a dual band 3G/4G Wi-Fi router (3G / 4G gateway) specially for Vehicles using. LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06. It has1 LAN port, support 802.11 a/b/g/n/ac and 3G/4G. This device has Wide Area Network VPN tunnel, Local Area Network Wi-Fi security authentication, 4G/3G and watchdog functions etc, to achieve wireless LAN seamless connection, automatic network redial to provide users with high-speed, secure, reliable mobile broadband services.It has a USB 2.0 data interface, a MICRO SD (TF) card interface, with larger storage function.
This device with metal case and vehicle anti-interference design, to achieve excellent anti-interference performance. Also it uses vehicle power supply design, support 9V~28V Car power supply,can effectively prevent equipment damage from vehicle’s power fluctuations, it offers a wonderful solution for vehicle Wi-Fi such as bus Wi-Fi,car Wi-Fi, train Wi-Fi, taxi Wi-Fi etc. This device also widely used in Wi-Fi coverage project like Bus station, the Airport, Sea port etc. At the same time, it is also widely used in scenic where Wi-Fi coverage and other public places where Wi-Fi coverage of the Internet.
- Special for Vehicles using;
- Complies with 802.11b/g/n/a/ac. wireless protocol;
- Support dual band 2.4G and 5G wifi signal + support 3G/4G at the same time;
- LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06.
- Support 4G / 3G watchdog function, automatic network redial.
- Can be dialed through an external USB interface (need to mount USB 3G/4G Dongle )
- Support GPS function (depending on 3G/4G module)
- Support to automotive power 12V and 24V systems, the minimum operating voltage is 9V, the maximum operating voltage is 36V. The maximum can be withstand 174V duration 150ms surge voltage, meet to 5a, 5b standard of the car protection.
-
mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, USB 3.0 port, Rooter and OpenWRT firmware supported
$69.90Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included
Max. LAN Data Rate: 867Mbps
Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n
Wi-Fi Supported Frequency: 2.4G & 5G
Wi-Fi Transmission Standard: 802.11ac
Wired Transfer Rate: 10/100/1000Mbps
2.4G Wi-Fi Transmission Rate: 300 Mbps
Encryption Type: WPA-PSK
Function: FireWall, QoS, VPN
LANPorts:4 WAN Ports:1
USB 3.0 port: 1 included
Certification: FCC CE
5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)
Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !
Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)
Learn More -
524 LTE pure 5G Whip4 Antenna 617-960 / 1710-3800 / 4900 - 6000MHz 4dBi 5G Swivel hinged SMA LTE male Connector
$9.99Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz
21,5cm lenght
5G NR: n41/n77/n78/n79 ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)
Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32
LTE-TDD: B34/B38/B39/B40/B41/B42/B43
600-6000MHz
≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM
Learn More -
524 LTE pure 5G 4x4 MIMO OMNI Outdoor Antenna 617 - 6000 MHz 4dBi 4G/5G 4xSMA LTE male Connector, global
$55.00Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz
Model: 524LTE-TOF-0660-4DV-1Electrical Specifications
Frequency-MHz 617-960/1710-3800/4900-6000
Gain-dBi 2.5 / 3.5 / 4
VSWR <2.5
Polarization Vertical
Horizontal Beam Width 360°
Vertical Beam Width 60°
Impedance 50 ohms
Max. Input Power 50W
Lightning Protection DC GroundMechanical Specifications
Learn More
Connector 4×SMA male
Cable 1 meter RG405
Dimension Ø132*220 mm
Weight 1.2 kg
Mounting Mast Ø30-Ø50 mm
Radome Material UV PVC
Rate Wind Velocity 210km/h
Operating Temperature -40°C - +65°C -
524 LTE pure 5G Magnetic Mount 4G/5G Antenna, 617 - 6000 MHz, 4dBi, 3m cable, SMA male connector
$14.99Pure 5g 4dBi 4G/5G Magnetic Mount Antenna 600-6000MHz with 3m sable, SMA male connector
16cm lenght
5G NR: n41/n77/n78/n79 ( Tested module :MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)
Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32
LTE-TDD: B34/B38/B39/B40/B41/B42/B43
617-960/1710-3800/4900-6000 MHz
≤2.2 / 3-4DBi / 50Ω / 50W / Length 16CM
Learn More