Wodaplug 5G 4G LTE Pigtail cable Ipex 1.0 U.FL-LP-040 for U.FL-R-SMT-1 connector Female / SMA Female 15cm, for miniPCIe modules

Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.

Wodaplug 5G LTE Ipex 1.0 Pigtail cable u.fl Female / SMA Female 15cm compatible with new 4G and 5G modules as is EC25, EP06, from quectell

Learn More

WLE600VX - 7C Industrial Grade (85°C) Dual Band 2×2 802.11ac miniPCIe Module

Availability confirmed for end Sept 2022 now! Pre-orders are required.

Qualcomm Atheros QCA9892 - Industrial Grade Chipset

• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)

• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n

• 2x2 MIMO Technology, up to 867Mbps

• Mini PCI Express edge connector

• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)

• Cards are individually calibrated for Quality Assurance

• Supports 4.9GHz operation

Certification :
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537)

Learn More

WiFi6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD

AW7915-NPD is a WiFi6 11ax 2T2R 1800Mbps mini PCIe Module by MT7915DAN - new improved version available ! WPA3 supported in latest OpenWRT.

AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

Learn More

WiFi6 4T4R Dual Bands Selectable mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NP1

New samples available now - final version ready!

AW7915-NP1 is a 4T4R 2401 Mbps WiFi6 11ax Mini PCIe Module by MT7915 AN chip, Dual Bands selectable is configurable. Can  not be Dual Band dual conncurrent, for DBDC application please use NPD version.

AW7915-NP1 is a WiFi6 Mini PCIe Module 4T4R based on Mediatek MT7915AN which is a WiFi Mini PCIe single chip which supports 2401 Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915AN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915AN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915AN.

Learn More

USB extension board for WPJ 344 and WPJ 558 boards

- 2 x USB 2.0 ports
- 1 x miniPCIe-based USB 2.0 only interface
(e.g. 3G modems, not additional radio card)

Learn More

5G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA

Learn More

Variant for EMEA/Australia/Brazil : EP06-ELA-512-SGA

LTE-A ready !! EP06-E PCIE has stop production as old version. But we still have 350pcs EP06-E PCIE in stock now !!

LTE FDD: B1/B3/B5/B7/B8/B20/B28
LTE TDD: B38/B40/B41
2×CA: B1+B1/B5/B8/B20/B28;
B3+B3/B5/B7/B8/B20/B28;
B7+B5/B7/B8/B20/B28;
B38+B38; B40+B40; B41+B41
WCDMA: B1/B3/B5/B8

Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)

LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems

Learn More

Variant for America : EP06-A

LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.

LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
B29/B30/B66
LTE TDD: B41
2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
B4+B4/B5/B12/B13/B17/B26/B29;
B25+B5/B12/B13/B17/B25/B26/B29;
B30+B5/B12/B17/B26/B29; B41+B41
(Note: B29 is only for secondary
component carrier)
WCDMA: B2/B4/B5

Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)

LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems

Notice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem  support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.

Learn More

EC25-E FA PCIE - LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41
WCDMA: B1/B5/B8
GSM: B3/B8

LTE Version 3GPP E-UTRA Release 11

Quectel EC25 is a series of LTE category 4 module optimized
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage.

Learn More

Qualcomm QCA 9882 2x2 MIMO - WDS WLE600VX - 7A - 802.11ac 2.4/5GHz miniPCIe WiFi Radio Solution

limited quantity (2000+pcs) available for orders with delivery time 2-3 weeks - please contact us by email if you are interested in this modules

The WLE600VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9882 chipset, the WLE600VX dramatically increases the overall throughput up to 867Mbps with 2 x 2 MIMO technique. Leveraging the revolutionary 11ac technology, WLE600VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE600VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

Certification :
CE RED, FCC, UK-CA

Learn More

WLE900V5-27ESD - 5GHz High Power 3×3 MIMO 802.11ac Wave 1 Module

Learn More

QCA 9880 WLE900VX - 7A 802.11ac 3x3 MIMO miniPCIe module - available again now - or you can also use 524wifi900vx Pro+ or Sparklan modules with identical chipset

802.11ac 2.4/5GHz miniPCIe Radio Solution

The WLE900VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9880 chipset, the WLE900VX dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE900VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

Dual Band 3×3 MIMO 802.11ac Wave 1 Module

• Qualcomm-Atheros QCA9880
• XB140 Reference Design
• 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• 3X3 MIMO Technology & up to 1.3Gbps
• MiniPCI Express 1.1 interface

Learn More

COMPEX WLE1216V5-20 MU-MIMO 4 X 4 802.11ac miniPCIe Wawe2 Radio module, QCA 9984 chip, 5GHz, single band, 20dBm

Model: WLE1216V5-20 - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0 Standard form factor
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead

The WLE1216V5-20 is a IEEE 802.11ac wireless adapter that operates in 5GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset( "Cascade" series), the WLE1216V5-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11ac technology, WLE1216V5-23 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise aplications.The WLE1216V5-20 is backward compatible with 802.11a/n and fully supports industry standards compliant security.

Max connected clients for wle1216V5-20 in wpq864 is about 500users. (class B, C Network) !!!
Wave 2 Board Data :
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)
Learn More

Dual-band 802.11n MIMO 2X2 miniPCIe module  (End Of Life - last 500 modules available now for orders with 2-3weeks lead time but the MOQ is 100pcs )

(Please use 524wifi 600VX modules instead)

WLE200NX-7A is a full-size mini PCIe wireless network adapter providing the leading performance of 802.11/a/b/g/n. It supports up to 300Mbps physical data rates and about 200Mbps of actual user throughput for both the uplink and downlink. With the help of dual-band design, you will enjoy universal connectivity to any 802.11 device through your wireless AP or wireless Router.

 

It is configured with Atheros chipset, so it is easy to use with all draft IEEE 802.11n compatible WLANs. It is ideally suitable for integrating a wide range of OEM devices

 

CE certified !!

Learn More