802.11AC / AX WiFi solution
WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!
- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.
- HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.
-
DR 600VX QCA9882 Reference XB140 design miniPCIe Dual Band module, 802.11ac, 2,4/5GHz, 2x2 MIMO, 3,3V, 2*ufl, Wallys
$39.00802.11ac 2.4 / 5GHz miniPCIe 2*2 MIMO Radio module designed for Enterprise Wireless Dual Band Access Points and High Speed data transmition!
Need sampel first ? No problem, please contact us at info at 524wifi.com ! Available now !
Dual Band 2×2 MIMO 802.11ac Wave 1 Module, Cheaper version, not with Pro+ technology.
-
Qualcomm-Atheros QCA9882 chipset
2.4GHz max 24dBm & 5GHz max 23dBm output power
IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
2x2 MIMO Technology, up to 867Mbps
Mini PCI Express edge connector
Support the Frequency 4920MHz~4980MHz
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check
(LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards
Supports Dynamic Frequency Selection (DFS)
- YOUTUBE Viideo about thsi modules
-
-
DR882-NAS QCA9882 miniPCIe High Power WiFi radio module, 28dBm, 802.11ac, 5GHz, 2x2MIMO, 2xMMCX, Wallys
$59.90DR882-NAS 28dBm - 5GHz High Power 2×2 MIMO 802.11ac Wave 1 QCA9882 Module
- Featuring with industrial-grade Qualcomm-Atheros QCA9882 chipset
- Maximum 28dBm output power aggregate ( 25 per chain)
- IEEE 802.11ac compliant & backward compatible with 802.11n and 802.11a
- 2X2 MIMO Technology & up to 867Mbps
- MiniPCI Express 1.1 interface, 3,3V
- 4.940GHz to 5.825GHz Frequency Range
- 20MHz/40MHz/80MHz Bandwidth
The DR882-NAS is a IEEE 802.11ac wireless adapter that operates in 5 GHz bands, available in PCIe mini card form factor. Featuring QCA9882 chipset, the DR882-NAS dramatically increases the overall throughput up to 867Mbps with 2x2 MIMO technique. Leveraging the revolutionary 11ac technology, DR882-NAS sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. It is backward compatible with 802.11a/n and fully supports industry standards compliant security.
FCC certified (CE certification needs higher volume order)
Theoretical Max distance can set on DR882-NAS : 17km - from the theoretical acktimeout value. -
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More -
Sparklan WPEQ-256ACN Mini PCIe Module WiFi 5, Qualcomm QCA9882 BR4A 2T2R, 802.11ac/a/b/g/n
$30.00WPEQ-256ACN - can work as replacement of wle 600vx modules - identical chipset, identical driver
802.11ac/a/b/g/n Mini PCIe Module (WiFi 5), Qualcomm QCA9882-BR4A 2T2R
- Chipset: Qualcomm Atheros QCA9882-BR4A
- Antenna: 2xIPEX connectors, 2T2R
- Interface: PCIe: WLAN
- Output Power up to 20dBm
- Support: Linux, OpenWRT
The WPEQ-256ACN is powered by Qualcomm Atheros QCA9882 radio chip and features 2×2 WiFi 5 technology for higher throughput performance, reliability and range. It is designed to meet the demanding performance requirements of critical embedded applications.
The WPEQ-256ACN dramatically increase the overall throughput up to 867Mbps. Leveraging the revolutionary WiFi 5 technology, WPEQ-256ACN sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as point of sale, gaming machine and medical equipment.
-
Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas
$125.00MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi
Description
DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
Onmi Antenna
■ 2 x 2.4G&5G Antenna
■ PCB Antenna
■ 2.4G: 4dbi ;5G: 6dbi
Enclosure
■ Dimension: 220x 220 x 42.54mm
■ UV Protected and Durable ABS Radome
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt