802.11AC / AX WiFi solution
WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!
- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.
- HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.
-
WiFi 5 5N17 5GHZ 17dBi DUAL-POLARIZATION ANTENNA for 11ac wifi, 2*2 MIMO, COMPEX
$15.00
Special Price $12.00
COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl
- 5.1 ~ 5.9 GHz
- 17 dBi Dual-Polarization
- 2x U.FL
- -40dB Isolation
- Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)
-
Qualcomm Atheros QCA 9377 dual-band WiFi AC Bluetooth wireless network card
$17.00Advanced 802.11ac combo SoC - this module is EOL - you can use Intel AC7265 module as substitue
Advanced 802.11ac features such as MU-MIMO, Host wake-on-wireless and ARP (Address Resolution Protocol) offloading enable the WLAN link to remain associated for extended periods for additional power savings
Supports dual-mode Bluetooth 5 - QCA9377 supports Bluetooth for Class-1 and Class-2 transmissions without requiring an external power amplifier Advanced WLAN/Bluetooth coexistence and concurrent RX WLAN/Bluetooth coexistence allows for superior rateover-range throughput and low-latency performance in real-world operating conditions Power saving techniques for low power consumption
Both WLAN and Bluetooth power management utilize advanced power saving techniques such as: - gating clocks to idle or inactive blocks - voltage scaling - fast start and settling circuits - active duty cycles - processor frequency scaling
Learn More -
Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV versions boards)
$19.90Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)
Features:
Support 802.3AT/AT
The output voltage is 24V
The efficiency is 85%
Support surge protection
Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description : PD-25 is a 802.3at module,that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.
-
Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$22.00DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module
Works only with DR518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6102 5GHz, max 23dBm per chain, up to 2402Mbps Single Band 5 GHz 2x2 WiFi 6E 802.11ax 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More -
Turris WiFi 2.4 / 5GHz Antenna Diplexer with LTE Coexistence Filter (Dual Band)
$24.99Turris Diplexer with LTE Coexistence Filter
It combines the 2.4GHz/5GHz signals to one single dual-band antenna with or without an LTE coexistence filter. Instead of using 8x Antennas for both WiFi radio, you may now reduce the antenna to 4 by using our diplexer to connect both 2.4GHz and 5GHz radios together. LTE coexistence option is with High Rejection in LTE bands.Learn More
Specifications:- 1x1 2.4GHz/5GHz U.FL Connector
- 1x1 2.4GHz/5GHz SMA Connector, no cable sincluded in
- 2412MHz~2472MHz, 4900MHz~5950MHz
- 50 Ω for Impedance