Currency:

802.11AC / AX WiFi solution

802.11AC / AX WiFi solution

WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.

We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.

MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!

- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.

-  HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.

Position
Set Ascending Direction

Grid List

15 per page

11 Item(s)

  1. WiFi 5 5N17 5GHZ 17dBi DUAL-POLARIZATION ANTENNA for 11ac wifi, 2*2 MIMO, COMPEX

    $15.00

    Special Price $12.00

    COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl

    • 5.1 ~ 5.9 GHz
    • 17 dBi Dual-Polarization
    • 2x U.FL
    • -40dB Isolation
    • Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)
    Learn More
  2. QCA 9531 WPJ531LV-A Dual Radio Embedded Board, 16/64MB, on board 2.4GHz radio, 11n/11ac ready

    $75.00

    CompexWPJ531LV-A Dual Radio Embedded Board gen3 - available again, but MOQ is 50pcs - lead time is 2-3 weeks now

    part no: WPJ531LV 7A07P01612AR-1 (no SIM slot)
    WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.

    Learn More
  3. COMPEX QCA9890 WLE900VX - i 7BA Industrial-grade 3*3 802.11ac Dual band Radio miniPCIe module

    $56.00

    Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks

    Available now in stock!

    The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

    DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

    • • Qualcomm-Atheros QCA9890, XB140 Reference Design
    • • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
    • • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
    • • Operating temperature range:-40 C to 75 C
    • • 3X3 MIMO Technology & up to 1.3Gbps
    • • MiniPCI Express 1.1 interface


    LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.

    We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module

    Learn More
  4. QCA9984 WLE1216V2-20 2,4GHz 4×4 MU-MIMO 802.11n miniPCIe Module, single band, 20dBm, COMPEX

    $95.00

    COMPEX WLE1216V2-20 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe WiFi MODULE - MOQ 20pcs, lead time 2 weeks

    Model: WLE1216V2-20-CUS239-4A-TE - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0

    Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead.

    The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

    Product Highlights

    • Qualcomm Atheros ‘Cascade’ QCA9984
    • 2.4GHz max 20dBm output power (per chain)
    • Heat sink allows free air operation
    • IEEE 802.11b/g/n compliant, up to 800Mbps
    • Multi-user MIMO (MU-MIMO) beamformer
    • Mini PCI Express 2.0 interface
    • Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
    • Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
    • Supports Dynamic Frequency Selection (DFS)
    • Designed for High Bandwidth Enterprise Wireless Access Points

    https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
    Can work with Ath10driver well :-)

    Learn More
  5. QCA9880 WDS WLE900VX - 7A miniPCIe module, Qualcomm, 802.11ac, 2,4/5GHz, 3x3 MIMO, reference XB140 design, Compex

    QCA 9880 WLE900VX - 7A 802.11ac 3x3 MIMO miniPCIe module - available again now - or you can also use 524wifi900vx Pro+ or Sparklan modules with identical chipset

    802.11ac 2.4/5GHz miniPCIe Radio Solution

    The WLE900VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9880 chipset, the WLE900VX dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE900VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

    Dual Band 3×3 MIMO 802.11ac Wave 1 Module

    • Qualcomm-Atheros QCA9880
    • XB140 Reference Design
    • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
    • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
    • 3X3 MIMO Technology & up to 1.3Gbps
    • MiniPCI Express 1.1 interface
    Learn More
  6. QCA9880 WLE900V5 - 27 8AB ESD miniPCIe module, high power, 27dBm, 802.11ac, 3*3MIMO

    WLE900V5-27ESD - 5GHz High Power 3×3 MIMO 802.11ac Wave 1 Module

    • Qualcomm-Atheros QCA9880
    • CUS223 (High Power) Reference Design
    • Maximum 27dBm output power (per chain), 32dBm(aggregate)
    • IEEE 802.11ac compliant & backward compatible with 802.11n and 802.11a
    • 3X3 MIMO Technology & up to 1.3Gbps
    • MiniPCI Express 1.1 interface
    • Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV

    WLE900V5-23 MUST use external 5V power, WPJ344 can provide external 5V. What I mean WLE900V5-23 must use 5V by using 5V cable from WPJ344

    Learn More
  7. QCA9882 WDS WLE600VX-7A miniPCIe module, 802.11ac, 2,4 / 5GHz, 2x2 MIMO, Qualcomm reference XB140 design, COMPEX

    Qualcomm QCA 9882 2x2 MIMO - WDS WLE600VX - 7A - 802.11ac 2.4/5GHz miniPCIe WiFi Radio Solution

    limited quantity (2000+pcs) available for orders with delivery time 2-3 weeks - please contact us by email if you are interested in this modules


    The WLE600VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9882 chipset, the WLE600VX dramatically increases the overall throughput up to 867Mbps with 2 x 2 MIMO technique. Leveraging the revolutionary 11ac technology, WLE600VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE600VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.



    Certification :
    CE RED, FCC, UK-CA

    Learn More
  8. COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563

    $99.99

    WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot

    Part no WPJ563 7A03PO16F1GAR-1
    Lead time is 2-3 weeks now - available for orders now

    775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac

    • Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
    • 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
    • 128MB System Memory
    • 16MB NOR Flash
    • 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
    • Supports Dynamic Frequency Selection (DFS)
    • Single SIM Holder on-board
    • Support 2 x Gigabit Ethernet Port

    Applications : 

    • 802.11g/n + 802.11a/n/ac Access Point

    • Point-to-MultiPoint High Capacity Wireless Bridge

    • Wireless Customer-Premises Equipment (CPE)

    WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.

    Power solution :

    DC Jack: 12-24V

    PoE: IEEE 802.3af 48V,

    IEEE 802.3at 56V,

    or Passive PoE 36-56V DC

    Learn More
  9. QCA 9531 WPJ531HV-A Dual Radio Embedded Board ,16/64MB, on board 2.4GHz radio, 11n/11ac ready

    $49.90

    Compex WPJ531HV-A Dual Radio Embedded Board gen3

    WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.
    DC Power 1x DC Jack Connector: 24-56V
    Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
    Power Consumption 7 Watts (Max)
    SIM bay on board! Learn More
  10. COMPEX QCA9890 WLE900VX i Temp 7CA Industrial grade 85C 3*3 802.11ac Dual band Radio miniPCIe module

    $63.00

    Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7CA 85C, COMPEX Networks

    Available now in stock!

    The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----85 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

    DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

    • • Qualcomm-Atheros QCA9890, XB140 Reference Design
    • • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
    • • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
    • • Operating temperature range:-40 C to 85 C
    • • 3X3 MIMO Technology & up to 1.3Gbps
    • • MiniPCI Express 1.1 interface

    Learn More
  11. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $155.50

    To: $2,721.46

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
Position
Set Ascending Direction

Grid List

15 per page

11 Item(s)