802.11AC / AX WiFi solution
WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!
- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.
- HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.
-
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More -
DR 600VX QCA9882 Reference XB140 design miniPCIe Dual Band module, 802.11ac, 2,4/5GHz, 2x2 MIMO, 3,3V, 2*ufl, Wallys
$39.00802.11ac 2.4 / 5GHz miniPCIe 2*2 MIMO Radio module designed for Enterprise Wireless Dual Band Access Points and High Speed data transmition!
Need sampel first ? No problem, please contact us at info at 524wifi.com ! Available now !
Dual Band 2×2 MIMO 802.11ac Wave 1 Module, Cheaper version, not with Pro+ technology.
-
Qualcomm-Atheros QCA9882 chipset
2.4GHz max 24dBm & 5GHz max 23dBm output power
IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
2x2 MIMO Technology, up to 867Mbps
Mini PCI Express edge connector
Support the Frequency 4920MHz~4980MHz
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check
(LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards
Supports Dynamic Frequency Selection (DFS)
- YOUTUBE Viideo about thsi modules
-
-
DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6
$149.99DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support
Samples are available now! OpenWRT firmware and OpenWiFi supported
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.
Learn More -
DR 900VX QCA9880 Reference XB140 design miniPCIe Dual Band module, 802.11ac, 2,4/5GHz, 3x3 MIMO, 3,3V, 3*ufl, Wallys
$45.00802.11ac 2.4 / 5GHz miniPCIe 3*3 MIMO Radio module designed for Enterprise Wireless Dual Band Access Points and High Speed data transmition!
Cheaper version, not with Pro+ technology.
Need sampel first ? No problem, please contact us at info at 524wifi.com ! Available now in stock!
Dual Band 3×3 MIMO 802.11ac Wave 1 Module
-
Qualcomm-Atheros QCA9880 chipset
2.4GHz max 24dBm & 5GHz max 25dBm output power
IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
3x3 MIMO Technology, up to 1.3Gbps
Mini PCI Express edge connector
Support the Frequency 4920MHz~4980MHz
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check
(LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards
Supports Dynamic Frequency Selection (DFS)
- YOUTUBE Viideo about this modules
-
-
DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys
$139.00Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board
2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.
Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz
■ SMA Plug interface ■ Plastic rod of black
■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029
Dimension: 132x 119 x 34 mm
■ Our Firmware supports all the modules of Quectel
Support Openwifi
Support QSDK
Support Openwrt