COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl

• 5.1 ~ 5.9 GHz
• 17 dBi Dual-Polarization
• 2x U.FL
• -40dB Isolation
• Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)

CompexWPJ531LV-A Dual Radio Embedded Board gen3 - available again, but MOQ is 50pcs - lead time is 2-3 weeks now

part no: WPJ531LV 7A07P01612AR-1 (no SIM slot)
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.

Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks

Available now in stock!

The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

• • Qualcomm-Atheros QCA9890, XB140 Reference Design
• • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• • Operating temperature range:-40 C to 75 C
• • 3X3 MIMO Technology & up to 1.3Gbps
• • MiniPCI Express 1.1 interface

LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.

We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module

COMPEX WLE1216V2-20 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe WiFi MODULE - MOQ 20pcs, lead time 2-3 weeks

Model: WLE1216V2-20-CUS239-4A-TE - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0

Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead.

The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

Product Highlights

• Qualcomm Atheros ‘Cascade’ QCA9984
• 2.4GHz max 20dBm output power (per chain)
• Heat sink allows free air operation
• IEEE 802.11b/g/n compliant, up to 800Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)