Professional two way antenna splitter for signal integration / Y-branch if you connect two independednt antennas to AP. Water proof design. Learn More

Description Profesional 3-waz antenna splitter for signal merge / split by use of three independent antennas. Watterproof. Frequency Range 800-2500 MHz VSWR ≤1.4 Isolation ≥22 dB Insertion Loss ≤5.4 dB Passband Ripple ≤0.3 dB Phase Imbalance ≤3° Impedance 50Ω Maximum Input Power 25 W Dimension-mm 72 × 72 × 23 mm Learn More

Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz

Model: 524LTE-TOF-0660-4DV-1

Electrical Specifications
Frequency-MHz 617-960/1710-3800/4900-6000
Gain-dBi 2.5 / 3.5 / 4
VSWR <2.5
Polarization Vertical
Horizontal Beam Width 360°
Vertical Beam Width 60°
Impedance 50 ohms
Max. Input Power 50W
Lightning Protection DC Ground

Mechanical Specifications
Connector 4×SMA male
Cable 1 meter RG405
Dimension Ø132*220 mm
Weight 1.2 kg
Mounting Mast Ø30-Ø50 mm
Radome Material UV PVC
Rate Wind Velocity 210km/h
Operating Temperature -40°C - +65°C

Learn More

Pure 5g 4dBi 4G/5G  Magnetic Mount Antenna 600-6000MHz with 3m sable, SMA male connector

16cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

617-960/1710-3800/4900-6000 MHz

≤2.2 / 3-4DBi / 50Ω / 50W / Length 16CM

Learn More

524 LTE Pure 5G / 4G 4dBi OMNI directional Antenna 600-6000MHz with 1m cable, N mamle to SMA male connector

20cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

617-960/1710-3800/4900-6000 MHz

≤2.2 / 3-4DBi / 50Ω / 50W / Length 20CM

Learn More

Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz

21,5cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

600-6000MHz

≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM

Learn More

Pure 5g Whipe7 7dBi

19cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM500Q、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

600-6000MHz

≤2.0 / 7DB / 50Ω / 50W / Length 19CM

Learn More

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

Learn More

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

Learn More

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

Learn More

524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with 12cm pigtail cable, M?CX connector

Electrical Properties :
Frequency 2.4~2.5GHz , 4.9~5.9GHz
Impedance 50 0hm Nominal
V.S.W.R  - 1.92 : 1 Max
Return Loss -10 dB Max
Radiation Omni-directional
Gain (Peak)  5,0 dB
Cable Loss  1,5 dB / m Max @ 2450 MHz
Polarization Linear, Vertical
Admitted Power 1 W
Connector ipex1 (ufl)

Learn More

524 WiFi internal FPC Dual Band 5dBi Antenna , 2.4 / 5 GHz , with 12cm pigtail cable, ufl IPEX 1 connector

Electrical Properties :
Frequency 2.4~2.5GHz , 4.9~5.9GHz
Impedance 50 0hm Nominal
V.S.W.R  - 1.92 : 1 Max
Return Loss -10 dB Max
Radiation Omni-directional
Gain (Peak)  5,0 dB
Cable Loss  1,5 dB / m Max @ 2450 MHz
Polarization Linear, Vertical
Admitted Power 1 W
Connector ipex1 (ufl)

Learn More

524 WiFI 2.4 / 5.8 GHZ Terminal Antenna, 2dBi, rSMA, 10cm lenght

PRODUCT TECHNICAL SPECIFICATION :

Frequency Range (MHz) - 2400-2483/5100-5880

Input Impendence (Ω) - 50

V.S.W.R ≤ 2

Gain (dBi) 2

Learn More

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

Learn More

WiFi pigtail cable RF MMCX / R to N female (2cm) 20cm, dia1.32 for miniPCIe WiFi cards and router boards with MMCX connectors.

ds Learn More

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

Learn More

WiFi cable RF UltraMini U.F Lplug to rSMA bulkhead, 20 cm total lenght, dia1.13mm for miniPCIe cards with ufl connectors, 2,4 +5 +6 GHz range Learn More

Specialy designed stable 3dB gain PUK omnidirection antenna for wild frequency range 700-2700 MHz for GSM 3G 4G or 5G use with LTE modules

Frequeny range: 700-2700 MHz

Bandwidth (MHz) 262/980MHZ

Input Impendence (Ω) 50

V.S.W.R ≤2 Gain (dBi) 3

Polarization Type Vertical polarization

Radiation Direction All (Omnidirectional)

Max Input Power (w) 50

Operating Temperature -20℃～+85℃

Storing Temperature -40℃～+85℃

Cable length (mm) 1000

Connector Type SMA

Dimension-mm Φ46*15

Learn More

5G NR frequency range - 600 - 6000MHz

Gain - 40dbi

VSWR - 1.5

Polarization - vertical

input impendance - 50Ω

Max power 50W

Beam width - omni directional

connector - SMA Male

color - black

antenna total size - H:20, W:4.5, T:1 cm operation temperature - -40°C to 80°C Radome material - ABS 

Learn More

Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount

Learn More

Indoor enclosure with Onmi Antennas

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■  Support Wallys’ PCBA Mainboar DR4029, DR4028

Learn More

Outdoor box with WiFi Antennas 

■  2 x5G Antenna directional

■  PCB Antenna

■ 16dBi max gain

■  DRA25  2,4GHz omni antennas are optional to connect using N-type pigtails (not included in - optional)

Learn More

1. Feature * 17dBi Dual Polarized Micro strip Antenna Array * 5GHz of frequency * MMCX connector * Support 802.3 11AX/AC/AN * RoHS compliance 2. Application * 5GHz Wireless Communication * WLAN device, WLAN Router, e.g., AP, PIC Wireless Card 3. Description This antenna array is designed for 5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency. Learn More

OVERVIEW

The POE33024PF is a full gigabit unmanaged PoE fiber switch. It has 24*10/100/1000M RJ45 ports and 2*1000M SFP slot ports. Port 1-24 can support IEEE802.3af/at standard PoE power supply. single port PoE power reaches 30W, and the maximum PoE output power is 400W(at-600W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, visual intelligent building intercom through network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprises. Unmanaged model, plug and play, no configuration, easy to use.

FEATURE

Full gigabit access, gigabit SFP port uplink

All series support "gigabit Ethernet port and gigabit SFP fiber port " combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Support non-blocking wire-speed forwarding.

Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

Intelligent PoE power supply

24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

IEEE 802.3af/at PoE standard, without damaging non-PoE devices.

Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

Stable and reliable

Low power consumption, galvanized steel casing. The Fan active cooling.

Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

CCC,CE, FCC, RoHS ◇ Plug and play, no configuration, simple and convenient.

The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE.

Learn More

indoor plastic BOX for WP54/WP543 router board + walmount kit + screws. not for wpj344 Learn More

GentleBOX JA-215 MIMO

GentleBOX JA-215 MIMO contains integrated dual-polarized panel antenna with overvoltage protection and gilded layout guarantees a long life time.

This antenna is optimal solution for the clients at the frequency band 2.4 GHz.

Learn More

GentleBOX JC-220 MIMO

Specification:

• GentleBOX JC-220 contains itegrated dual-polarized 5 GHz antenna with itegrated overvoltage protection
• Antenna layout is gold plated
• GentleBOX JC-220 is optimal solution for clients in range 5 GHz
• GentleBOX is inclusive and ideal outdoor box for AP, RouterBOARD and other electronics
• With GentleBOX you can forget measuring and drilling! Everything is prepared
• With GentleBOX you can forget seeking for cable bush and assembling material! Everthing is enclosed. You will require 1 flat and 2 (PH1 and PH2) cross-shaped screwdrivers and spanner number "10"
• In GentleBOX are prepared grooves and holes for easy instalation of RouterBOARD or other electronics including screws and plastic distance piers
• outdoor and indoor usage
• simplified mounting of RB711
• link point-point

Learn More

Dual-polarized parabolic antenna JRC-32 DuplEX Precision

Antenna JRC-32 DuplEX Precision is based on popular duplex antennas coming with massive holder developed for microwave links.
Variations:

JRC-32 DuplEX Precision
JRC-32 DuplEX-SMA Precision
Usage:

dual-polarized antenna, horizontal and vertical polarization
the highest isolation! 53 dB
only 1 antenna instead 2 save money for mast!
extra high front to back ratio
special deep parabola for excellent parameters
easy to assembly: first only the holder and then the antenna only by 2 screws
fine setting elevation (of gradient) and azimuth ± 20°
right and left assembling
extrem wind stability
VSWR and isolation are measured during the manufacture of every piece
outdoor usage
you can count attainable distance from section of calculation
radom (plastic parabola cover) for each antenna free!

Learn More

Dual-polarized parabolic antenna JRC-32 DuplEX Precision Diagram Antenna JRC-32 DuplEX Precision is based on popular duplex antennas coming with massive holder developed for microwave links. Variations: JRC-32 DuplEX Precision JRC-32 DuplEX-SMA Precision Usage: dual-polarized antenna, horizontal and vertical polarization the highest isolation! 53 dB only 1 antenna instead 2 save money for mast! extra high front to back ratio special deep parabola for excellent parameters easy to assembly: first only the holder and then the antenna only by 2 screws fine setting elevation (of gradient) and azimuth ± 20° right and left assembling extrem wind stability VSWR and isolation are measured during the manufacture of every piece outdoor usage you can count attainable distance from section of calculation radom (plastic parabola cover) for each antenna free! Technical parameters Frequency range 5,45 - 5,85 GHz Gain 32,2 ±0,6dBi VSWR ≤ 1,5 Isolation between connectors 53dB (≥45dB) Front to back ratio ≥ 52 dB Beamwith-3 dB 4,1° Connector N - Female - JRC-32DuplEX R-SMA - JRC-32DuplEX-SMA Polarization linear, horizontal and vertical or 45° Parabola ø 90 cm aluminium alloy with baking colour Cover UV steady plastic ABS Instalation for mast ø 40 - 120 mm weight of antenna 10,65 kg weight of holder 3,25 kg The radiator is internally treated by high frequency technology "Hydrophobic coating" which increases resistance against humidity. Learn More