BIG SALE - 300Mbps Outdoor Access Point with 11dBi@2.4GHz Built-in Antenna, 8MB flash / 64MB RAM .

DISCOUNTED PRICE NOW !!

MMJ2N26E is a high-performance Outdoor Access Point with integrated PoE by using Atheros AR7240 (400MHz)Processor. MMJ2N26E supports high-speed data transmission up to 54Mbps, 108 Mbps or 300Mbps. MMJ2N26E is embedded with an integrated directional dual-polarization (vertical and horizontal) antenna, which is 11dBi at 2.4GHz.

Dual-polarization antenna provides good diversity coverage and better noise immunity. It has been integrated by high power radio to achieve longer range and higher throughput. The device is powerful, easy to handle, and also used in implementation over long-distance by wireless ISP.

Learn More

AVAILABLE !!! COMPEX power over ethernet , POE -100 220, injektor and extraktor, 3,3V up to 100m, fce: remote power/local power. The Compex Power Over Ethernet (POE-100-3.3) Kit is an accessory for the Compex Wireless Access Point, WPE54G. POE-100-3.3 allows the supply of operational power to a WPE54G via category 5 UTP cables. By deploying the POE-100-3.3, it removes the restriction of needing the Access Point to be close to a power supply. This means the Access Point can be used virtually anywhere. The POE-100-3.3 Kit consists of an injector unit and extractor unit and is an essential kit for outdoor or indoor wireless network deployment. Power Input 12V DC, 1.5A Power Output: 5V Ethernet Connector: RJ-45 Ethernet Data Rate: 10/100 Mbps Learn More

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

  

Learn More

MMZ531HV

Indoor 2,4GHz 11bgn access point with OMNI Payramid antena and POE support 802.3af

MMZ531 is a high-performance indoor Access Point with integrated PoE. Using Qualcomm Atheros QCA9531 network processor of speed 650MHz , coupled with 802.11bgn wireless technology and 2x2 MIMO technique enable it to support high-speed data transmission of up to 300Mbps.

DC Power 1x DC Jack Connector: 24-56V
Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
Power Consumption 7 Watts (Max)
Learn More

PoE Splitter Adapter, IEEE 802.3af compliant, Data and power carried over the same cable up to 100 meters, plastic case, pocket size, plug and play. Suitable for WPJ344/558 HV based devices Learn More

MMJ531 is a high-performance Outdoor Access Point with integrated PoE. Using Qualcomm Atheros QCA9531 (650MHz)Processor, MMJ531 supports high-speed data transmission up to 300Mbps. MMJ531 is embedded with an integrated directional dual-polarization (vertical and horizontal) antenna supporting 2.4GHz (11dBi). The type of the antenna depends upon the order configuration.
Dual-polarization antenna provides good diversity coverage and better noise immunity. It has been integrated by high power radio to achieve longer range and higher throughput. The device is powerful, easy to handle, and also used in implementation over long distance by wireless ISP.

This AP is goint to be EOL - last unit in stock now.

Learn More

WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot

Learn More

WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot

Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now

775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac

• Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
• 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
• 128MB System Memory
• 16MB NOR Flash
• 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
• Supports Dynamic Frequency Selection (DFS)
• Single SIM Holder on-board
• Support 2 x Gigabit Ethernet Port

Applications : 

• 802.11g/n + 802.11a/n/ac Access Point

• Point-to-MultiPoint High Capacity Wireless Bridge

• Wireless Customer-Premises Equipment (CPE)

WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.

Power solution :

DC Jack: 12-24V

PoE: IEEE 802.3af 48V,

IEEE 802.3at 56V,

or Passive PoE 36-56V DC

Learn More

Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !

Description

• DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).

  Learn More

This device is EOL  - last two units in stock !!   Please use WG1608 routers instead.

Complete LTE  plug & play complete solution, ready for Quectel EM12-G, EM06 / EP06 / EC 25 - XXX lte module, lte module not included in (pleas epurchase based on your region), supported in Openwrt or SDK compil.

M2M module & miniPCIe slots for 4G LTE modules, WiFi radio on board - for setup guide either SDK or OpenWRT/LEDE download rar file

EC25-V Verizon module tested supported with LEDE firmware

 

new Lede / OpenWRT software support more function than SDK:

support IPv6 

support one LTE module in miniPCIe or M.2 slot

support VPN function

support control band width and use Qos !

we use Qualocmm AP147 as reference design

 

Accord IEEE 802.11n IEEE 802.11b/g and IEEE802.3/ 802.3u standard；

Support multiple WAN access methods,including:3G/UMTS/4G/LTE, static ip, DHCP，PPPOE，dhcp-4G；

1X 10/100M WAN port (RJ45 interface), WAN ports support Cell/Static IP/DHCP/PPPoE (on demand, keep alive, schedule, manual), 1X 10/100M LAN port (RJ45 interface);

Support auto recovery mechanism, including online detect, auto redial when offline to make router always online；

2,4GHz WifI on board + miniPCIe slot for second wifi module (5G or 2,4G)

WIFI support WEP,WPA,WPA2 encryption,Support Wifi MAC address filter.

Support DHCP server and client, firewall,NAT, DMZ host,Support MAC address filter；

Schedule Reboot, Schedule Online and  Offline,etc.

Support APN/VPDN

Support  DDNS provider service.

High-powered industrial cellular module

High-powered industrial 32bits CPU

Power range: DC 5~36V  (USB powering supported)

mini board support passive POE 24V . 

support wide range volt from 9v~40V poe or power plug 

Support hardware and software WDT

SIM/UIM port: 15KV ESD protection;

Support low-consumption mode, including sleep mode, scheduled online/offline mode,scheduled power-on/power-off mode(optional)

Support standard WAN port and PPPOE  protocol that can connect to ADSL directly

Convenient configuration and maintenance

support firmware update locally or remotely (LAN, WiFi and OTA WAN)

Learn More

Dual Band 2×2 MU-MIMO 802.11ac/a/b/g/n Versatile Indoor Access Point

 

Learn More

Learn More

DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

Samples are available now! OpenWiFi and OpenWRT firmware supported.

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

Learn More

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Learn More