Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz

Model: 524LTE-TOF-0660-4DV-1

Electrical Specifications
Frequency-MHz 617-960/1710-3800/4900-6000
Gain-dBi 2.5 / 3.5 / 4
VSWR <2.5
Polarization Vertical
Horizontal Beam Width 360°
Vertical Beam Width 60°
Impedance 50 ohms
Max. Input Power 50W
Lightning Protection DC Ground

Mechanical Specifications
Connector 4×SMA male
Cable 1 meter RG405
Dimension Ø132*220 mm
Weight 1.2 kg
Mounting Mast Ø30-Ø50 mm
Radome Material UV PVC
Rate Wind Velocity 210km/h
Operating Temperature -40°C - +65°C

5G WWAN Card To RJ45 Adapter With SIM SloT

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

• Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
• Introduce integrated aluminum heat sink，make your 5G modem always cool.
• Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
• 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
• Adjust output to 3.7V. Prevent voltage drop when high data transfer .
• Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
• Use Nano SIM card slot , support hot swap simcard.
• ESD prtection at USB and SIM slot.
• Better performance, because of fast thermal module

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

-------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------

M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc

USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play) 

Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator

- High-quality current inductance and Solid capacitor （1000μF）
- Additional Power supply connector Introduce.
- Aux Volt input support 5V
- Metal body case conduct the Heat.
- Mounting Hole for Flat or Mount.

V4 version - New feature:

A - Use new Power IC ,more stable than previous version.

B - addd New USB ESD protection,

C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)

D - adjust output to 3.8V，Prevent high data transfer voltage drop.

E - adjust AUX input  (5V~12V)

It's 5Gnr  version, support New 5G M.2 size (52cm length） with 6 antenna hole 

The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.

The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .

USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com

The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.

Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.

Sim slot with ESD protection

The enclosure can used on a desktop or mounted to a wall.

The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm

The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 （42mm modem lenght card） or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately