QCN9074 / QCN6024 WIFI 6 11AX 4X4 WIFI DUAL BNAD Pro+ MODULE - selectable 2,4 ot 5GHZ:

DR9074E-DB based on QCN9074 or QCN6024  Chipset is an enterprise wireless module integrated with 4x4 or 2x2 MU-MIMO Dual Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters  designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

Features

■ Qualcomm Atheros QCN9074 or QCN6024

■ Maxim Tx power 20dBm per chain

■ Data Rateup to 4949Mbps

■ Support  2.412GHz-2.472GHz & 5.18GHz-5.825GHz

■ MiniPCIe connector

■ PCI Express 3.0 Interface

Applications

■ Security Surveillance

■ Commercial radio coverage

■ Hotel Wireless application

■ Forest fire protection engineering

■ Country coverage

■ Some special scene application

Learn More

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Learn More

Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Learn More

Dual Band 2×2 MU-MIMO 802.11ac/a/b/g/n Versatile Indoor Access Point

 

Learn More

WLE1216V5-20 i-Tempo 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe QCA 9994 WiFi MODULE - Industrial grad eversion , MOQ 20pcs, lead time 2 weeks

Model: WLE1216V2-20-CUS239-4A-TE - QCA 9994 chip - 4* ufl - MiniPCIe pin v2.0

The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9994 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

Product Highlights

• Qualcomm Atheros ‘Cascade’ QCA9994
• 2.4GHz max 20dBm output power (per chain)
• Heat sink allows free air operation
• IEEE 802.11b/g/n compliant, up to 800Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can wotk with Ath10driver well :-)

Learn More

Key benefits

• Qualcomm Atheros QCN9024 chipset

• 5Ghz, 4x4 MU-MIMO OFDMA technology, up to 4804Mbps PHY rate

• Single band 5Ghz 4x4 Wi-fi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

Available for orders - lead time is 2-3 weeks, par no WLE3000H5 7A0924S Learn More

Key benefits

• Qualcomm Atheros QCN6024/9024 Pine series chipset

• 2,4GHz, 4x4 MU-MIMO OFDMA up to 1376Mbps PHY rate

• 5GHz, 4x4 MU-MIMO OFDMA up to 4804Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

- lead time is longer, not available now - part np WLE3000HX 7A0924S

Learn More

Key benefits

• Qualcomm Atheros QCN6024/9024 Pine series chipset

• 2,4GHz, 4x4 MU-MIMO OFDMA up to 1376Mbps PHY rate

• 5GHz, 4x4 MU-MIMO OFDMA up to 4804Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

- lead time is 2-3weeks, samples available

Learn More

Key benefits

• Qualcomm Atheros QCN6023/6024/9024 Pine series chipset

• 2,4GHz, 2x2 MU-MIMO OFDMA up to 573Mbps PHY rate

• 5GHz, 2x2 MU-MIMO OFDMA up to 2402Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

Samples available for order with 2 weeks lead time - the only available part no is WLE3002HX 7A0624S

Learn More

Key benefits • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset • 2,4GHz, 3x3 MU-MIMO OFDMA up to 1032Mbps PHY rate • 5GHz, 3x3 MU-MIMO OFDMA up to 3603Mbps PHY rate • Dual band selectable Wifi 6 (802.11ax) • mPCIe interface with PCIe 3.0 • Heat sink allows free air operation • Designed for High Bandwidth Enterprise Wireless Access Points Learn More

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Learn More

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

  

Learn More

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

Learn More

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

Learn More