• Chipset: Qualcomm Atheros QCN9074
• Antenna: 4 x IPEX connectors, 4T4R
• Form Factor: Mini PCIe
• Interface: PCIe
• Support: Linux (Open Source) , Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Linux 5.9 FW Download Path - amss.bin + board.bin + m3.bin ( /lib/firmware/ath11k/QCN9074/hw1.0/)

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17.
• 802.11ax/ac/b/g/n tri-band WiFi 6 E miniPCIE module

WPEQ-262ACNI(BT)

WPEQ-261ACN(BT)

WPEA-251ACNI(BT)

GEPON OLT PON Module,Class C++, 7dBi, 20Km

WDS5441H-C(H)3AL is a high performance transceiver module for single fiber communications using a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. It is designed to meet CTC 3.0 and IEEE802.3ah -2004 1000BASE- PX20+++ applications.
The transmitter has automatic power control (APC) function and temperature compensation circuitry to ensure stable optical power output and extinction ratio over all operating temperature range. The transmitter meets Class 1 eye safety per IEC825 and CDRH standards.
The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with LVPECL compatible differential outputs. It features a burst-mode Loss of signal (LOS) output which is LVTTL compatible. The receiver offers bust-mode RSSI outputs, which is I2C
accessible digitized data stored in the internal flash memory.
The module provides digital diagnostic information of its operating conditions and status, including transmitting power, laser bias current, module temperature, supply voltage, and burst-mode receiving power. Calibration and alarm/warning threshold data are written and stored in the internal memory (EEPROM). The memory map is compatible with SFF-8472.
Compatible with all Wodaplug OLT units and all other with this standard

• Version 2021 : Gain Improvement. OmniDirectional Antenna 4G 5G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz
• 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for outdoor LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
• Gain 7-10dbi,  SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
• Dimensions (cm) : 2000mm, water and wind resistant, Operates between -40° and +60° c
• Specialy tuned for LTE 4G 5G frequencies
• Cable lenght 2m (customisable 3m o 5m or 10m max)
• GE0006AA

Wodaplug FTTH Outdoor PON BOX WDP0208B with 8 ports designed for mini package PLC splitters 1/8 or 2*1/4 

Wall / pole / ground mountable - ultra slim compact design
Double or single door access
Keyway entry
Splice and termination
Up to 8 ports ( PLC ) 1 - 2 inputs
Standard beige color
Locker feautured
Valdal proof
Special price if ordered in set with wodaplug GEPON active equipment systems ONU’s and OLT’s
The sealing performance meets the IP65-level requirements
Box body is made of special PV materials, it looks nice in shape and its operation is convenient, anti-ageing and long lasting
It is the combination of three functions: optical fusion, store and distribution
Adapter is fast installable, maintenance is easy, transmission loss is low

WDPBOX is specially designed, and optimized for GEPON or other PON networks design fiber optical distribution, termination and splice box. You get all in one solution for PON from Wodaplug.

Wall / pole / ground mountable - ultra slim compact design
Double or single door access
Keyway entry
Splice and termination
Up to 16 ports ( PLC ) 1 - 2 inputs
Standard beige color
Locker feautured
Valdal proof
Special price if ordered in set with wodaplug GEPON active equipment systems ONU’s and OLT’s
The sealing performance meets the IP65-level requirements
Box body is made of special PV materials, it looks nice in shape and its operation is convenient, anti-ageing and long lasting
It is the combination of three functions: optical fusion, store and distribution
Adapter is fast installable, maintenance is easy, transmission loss is low

WDPBOX is specially designed, and optimized for GEPON or other PON networks design fiber optical distribution, termination and splice box. You get all in one solution for PON from Wodaplug.

Wodaplug USB adapter for miniPCIE 5G 4G LTE modules incl SIM bay

Supports USB bus interface of Mini-Cards such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, 5G and Mini-Card to desktop PC

Easy installation & no driver required, but make sure you have installed the software drivers for your WWAN card.

Support SIM 6pin/8pin card connector.

No additional power required

Supports Plug & Play and Hot-Swapping

Attention - can not support WiFi modules !

• Designed for desktop/Laptop PCs that convert wireless M.2 Card to USB 2.0 port. Ideal for LTE 4G modules.
• You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
• Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, HUAWEI , Sierra Wireless , quectel
• Support 30*42 type NGFF(M.2) Key B card
• Support SIM 6pin/8pin card connector.
• • Attention - can not support WiFi modules !

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Available Certifications

WNFQ-258ACN(BT)