Currency:

Embedded Wireless Boards

Embedded Wireless Boards

11ax and 11ac ready Wireless CPU Embedded boards, Qualcomm Atheros based, PCBA, LEDE - OpenWRT supported (ath10k ath11k).

Dual radio solution for 11n + 11ac and new 11ax dual concurent 2,4GHz + 5GHz wifi 5 and wifi 6 !! Now we support 4G 5G LTE modules / LTE gateway or hotspot

Position
Set Ascending Direction

Grid List

15 per page

Items 1 to 15 of 23 total

Page:
  1. 1
  2. 2
  1. Wallys DR-AP6018-S Outdoor WiFi 6 AP, 802.11ax 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

    $169.00

    Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !

    Description

    • DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).

      Learn More
  2. DR-AP 2 Outdoor enclosure for Wallys router Boards, 5GHz directional antenna 2*2 MIMO 16dBi, (2,4GHz antenna optional)

    $49.00

    Outdoor box with WiFi Antennas 

    ■  2 x5G Antenna directional

    ■  PCB Antenna

    ■ 16dBi max gain

    ■  DRA25  2,4GHz omni antennas are optional to connect using N-type pigtails (not included in - optional)

    Learn More
  3. DR-AP 1 indoor plastic enclosure with integrated antennas 2,4 + 5 GHz , 2*2 MIMO 4 - 6 dBi

    $29.90

    Indoor enclosure with Onmi Antennas

    ■  2 x 2.4G&5G Antenna

    ■  PCB Antenna

    ■  2.4G: 4dbi ;5G: 6dbi

    Enclosure

    ■  Dimension: 220x 220 x 42.54mm

    ■  UV Protected and Durable ABS Radome

    ■  Support Wallys’ PCBA Mainboar DR4029, DR4028

    Learn More
  4. POE INJECTOR 48V - 56V IEEE Non-standard Gigabit Max 30W Power out, Pin Mode B Pin 4.5 (+) /7.8 (-), Wallys

    $29.00

    Non-standard; Gigabit ;Max 30 W

    Power out Pin: Mode B; Pin 4,5 (+)/7,8(-)

    Input:100-240V/AC;50/60Hz

    Output:DC48-56V

    Caution: Indoor use only.

    IEEE 802.3at;Gigabit ;Max 30 W Power out Pin: Mode -A; Pin 1,2 (+)/3,6(-) Input:100-240V/AC;50/60Hz Output:DC48-56V Caution: Indoor use only.

    Learn More
  5. DR5G17 17dBi Dual Polarized Micro strip Antenna Array 5GHz MMCX connector 802.3 11AX/AC/AN RoHS compliance, Wallys

    $27.00
    1. Feature * 17dBi Dual Polarized Micro strip Antenna Array * 5GHz of frequency * MMCX connector * Support 802.3 11AX/AC/AN * RoHS compliance 2. Application * 5GHz Wireless Communication * WLAN device, WLAN Router, e.g., AP, PIC Wireless Card 3. Description This antenna array is designed for 5GHz applications and can be easily built-in portable devices with MHF processes. It has excellent stability and sensitivity to consistently provide high signal reception efficiency. Learn More
  6. Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

    $149.00

    Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

    DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Planar Antenna 

    ■  2 x 2 MIMO 5G Antenna

    ■  5G: 16dbi

    Available for orders, lead time is 2-3 weeks.

    Learn More
  7. Wallys DR-AP4029 Indoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 + 5GHZ omni 4 / 6dBi antennas

    $125.00

    MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

    Description

    DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

    Onmi Antenna 

    ■  2 x 2.4G&5G Antenna

    ■  PCB Antenna

    ■  2.4G: 4dbi ;5G: 6dbi

    Enclosure

    ■  Dimension: 220x 220 x 42.54mm

    ■  UV Protected and Durable ABS Radome

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
  8. DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT

    $149.00

    DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

    Learn More
  9. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $155.50

    To: $2,715.46

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  10. DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys

    $139.00

    Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

    ■ SMA Plug interface ■ Plastic rod of black

    ■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

    Dimension: 132x 119 x 34 mm

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
  11. DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT

    $165.00

    Description

    DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    Learn More
  12. Qualcomm IPQ Alder Dream 9574 802.11BE WIFI 7 Multifunction Main BOARD, 4x4 MU-MIMO OFMDA, Wi-Fi 7, Wallys, DR9574

    $599.00

    Qualcomm IPQ 9574 AP.AL02.3 WIFI7 Mainboard Dream 9574 - samples ready for orders now

    IPQ9570/IPQ9574 WiFi 7 (802.11be) 4×4 MU-MIMO DBDC Embedded Board, DR9574 board is using qsdk firmware with QCA drivers, no OpenWRT.

    • Qualcomm IPQ9570/IPQ9574 Quad-Core ARM-A73 @ 2.2GHz processor ‘Alder’ Series
    • 2GB (2x1GB), DDR4 32-bit (2×16-bit) interface
    • 256MB NAND flash, 32MB NOR flash, 8GB eMMC
    • 4x M.2 (NGFF) E Key Socket with PCIe 3.0
    • 4x 1Gbps ethernet port, 2x 10Gbps ethernet port
    • 1x USB 3.0 port
    • -20ºC to 70ºC operating temperature
    • 204mm x 138mm x 20mm (W x H x D)
    •  4x4 on-board 2.4GHz radio, up to 1182Mbps physical data rate
    • Flexible Wi-Fi 6E/Wi-Fi 7 radio configurations via 4x M.2 (NGFF) E Key Socket with PCIe 3.0
    • 802.11be support, 802.11ax MU-MIMO OFDMA Access Point

    DR9574 based on IPQ9574 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment.

    Learn More
  13. Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01

    $115.00

    Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA

    Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !

     CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    • Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
    • 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
    • 256MB NAND Flash
    • 32MB NOR Flash
    • M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
    • 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
    • 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
    • 1x 2.5Gbps Ethernet port
    • 5x 1Gbps Ethernet ports
    • 1x USB 2.0 Port

    APPLICATIONS

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    • 802.11ax MU-MIMO OFDMA Access Point    • Mesh router supporting EasyMesh      • Smart AP TWT   • Can support OpenWIFI firmware  

    This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc

    Learn More
  14. DR6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6. Wallys

    $119.00

    DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

    Samples are available now! OpenWiFi and OpenWRT firmware supported.

     11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    Features

     Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

    Support: QCN9074 WiFi 6E Card in M.2 slot

    Product Description

    DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

    Learn More
  15. DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6

    $149.99

    DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

    Samples are available now! OpenWRT firmware and OpenWiFi supported

     11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    Features

     Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

    Support: QCN9074 WiFi 6E Card in M.2 slot

    Product Description

    DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

    Learn More

    Out of stock

Position
Set Ascending Direction

Grid List

15 per page

Items 1 to 15 of 23 total

Page:
  1. 1
  2. 2