Enclosure Material : ABS/PC, Flame Retardant, UV resistant
Enclosure Color : White
Weight : 0.5Kg
Outside Dimensions : 278.5mm x 122.2mm x 94.5mm
Integrated Antenna : 2,4GHz 11dBi panel antenna
Ethernet Interface : RJ45
Casing : Weatherproof Structure
Ratings of Casing : IP53
Mounting : Pole Mount or Wall Mount

MMZ531HV

Indoor 2,4GHz 11bgn access point with OMNI Payramid antena and POE support 802.3af

MMZ531 is a high-performance indoor Access Point with integrated PoE. Using Qualcomm Atheros QCA9531 network processor of speed 650MHz , coupled with 802.11bgn wireless technology and 2x2 MIMO technique enable it to support high-speed data transmission of up to 300Mbps.

Multifunction QCA IPQ6018 Wallys DR-AP6018-S Outdoor WiFi 6 Access point, 802.11ax 2*2 Mu-MIMO, dual band, 2,4 omni + 2*2 MIMO 5GHz directional antennas 16dBi, IP67 - available now !

Description

• DR-AP6018-S(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018-S Board; 2 x 6dBi 2,4GHZ Onmi Antenna; 2x2 16dBi 5GHz directional antenna, 1 x POE Adapter(24V^1A~48V^0.6A); 1 x Outdoor Enclosure IP67 (plastic).

  Learn More

Non-standard; Gigabit ；Max 30 W

Power out Pin: Mode B; Pin 4,5 (+)/7,8(-)

Input:100-240V/AC;50/60Hz

Output:DC48-56V

Caution: Indoor use only.

IEEE 802.3at；Gigabit ；Max 30 W Power out Pin: Mode -A; Pin 1,2 (+)/3,6(-) Input:100-240V/AC;50/60Hz Output:DC48-56V Caution: Indoor use only.

Passive POE with FE port, 24V/0,5A/12W with Wall Mount Style power supply, Non-standard POE(Pin 4&5-,Pin 7&8+ ).

Work with WP54, wp543 and new LV series of router boards.

SALE !!!

Indoor enclosure with Onmi Antennas

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■  Support Wallys’ PCBA Mainboar DR4029, DR4028

JTAG Programmer, for all COMPEX boards WPj558 / WPJ531 / WPJ 344 / WP543 / WPE72 / WP546 / WP54 / WPP54 / WP18 / NP18. Jtag Programmer can be used to load in your loader and firmware.

Outdoor box with WiFi Antennas 

■  2 x5G Antenna directional

■  PCB Antenna

■ 16dBi max gain

■  DRA25  2,4GHz omni antennas are optional to connect using N-type pigtails (not included in - optional)

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

Serial Converter, for all COMPEX boards - WPJ558/ WPJ531/ WPJ344/ WP543 / WPE72 / WP54 / WPP54 / WP18 / NP18 . Serial Converter can be used to debug the serial output messages.

Product description

PSAT-5-4P is 5 port 10/100Mbps unmanaged switch with 4 PoE ports. Switch automatically detecting and powering 802.3af/at (up to 30W/port) devices on 1 - 4 ports. 5th port is normal ethernet ports without PoE functionality as uplink port. Total PoE budget for devices is 96W with external power adapter 48V/2A, which is included the package.

With this switch you can power wide range of IP cameras, VoIP telephones, WiFi AP and other devices supporting 802.3af/at PoE standard.

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Multifunction QCA IPQ4029 Wallys DR-AP4029 Outdoor WiFi 5 Access point, 802.11ac 2x2 Mu-MIMO, dual band, 2,4 omni + 5GHz directional antennas, IP67

DR-AP4029(Outdoor) is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board;2 x 2,,4GHz Onmi Antenna 6dBi ; 2x2 MIMO 5GHz directional antenna 16dBi, 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Planar Antenna 

■  2 x 2 MIMO 5G Antenna

■  5G: 16dbi

Available for orders, lead time is 2-3 weeks.

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl

• 5.1 ~ 5.9 GHz
• 17 dBi Dual-Polarization
• 2x U.FL
• -40dB Isolation
• Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)

Qualcomm IPQ 9574 AP.AL02.3 WIFI7 Mainboard Dream 9574 - samples ready for orders now

IPQ9570/IPQ9574 WiFi 7 (802.11be) 4×4 MU-MIMO DBDC Embedded Board, DR9574 board is using qsdk firmware with QCA drivers, no OpenWRT.

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Turris Diplexer with LTE Coexistence Filter

Atheros AR7240 400MHz Network Processor - SALE - last 4 pcs in stock

1 Mini PCIe slot

2 Ethenet ports

Supports all Compex Mini PCIe radio modules

Supports Compex, OpenWRT firmware

Integrated passive Power-over-Ethernet

Integrated PoE cascade arrangement

Optional Remote hardware reset

DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module

Works only with DR518 boards, can not be ordered separately.

Features - Qualcomm Atheros QCN6102  5GHz, max 23dBm per chain, up to 2402Mbps  Single Band 5 GHz 2x2 WiFi 6E 802.11ax  2 spatial streams (2SS)  M.2 E Key Interface  PCI Express 3.0 Interface

Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.