524 WiFI 2.4 / 5.8 GHZ Terminal Antenna , rSMA, 19,5cm lenght

PRODUCT TECHNICAL SPECIFICATION :

Frequency Range (MHz) - 2400-2483/5100-5880

Input Impendence (Ω) - 50

V.S.W.R ≤1.7

Gain (dBi) 5

Kvalitní nízkoútlumový propojovací kabel N/male - N/male pro propojení antény se zařízením v pásmu 5GHz.

Délka 50cm Použitý kabel Trilan RF240.

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

WiFi pigtail cable RF MMCX / R to N female (2cm) 20cm, dia1.32 for miniPCIe WiFi cards and router boards with MMCX connectors.

• Cinterion 5G IoT Module
• Global 5G coverage on one single SKU
• LTE Cat. 20 fallback
• LTE Advanced-Pro (3GPP Release 15)
• Dual SIM support with Dual Standby Single Active support
• GNSS: GPS, GLONASS, Galileo and Beidou

The AirPrime® EM9190 M.2 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This device is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speed and up to 330 Mbps of uplink speed.

The EM9190 device is available in a 30 x 52 x 2.38 mm footprint. With automatic 4G and 3G fallback networks, and a built-in GNSS receiver, it can be used for a wide range of M2M and IoT applications such as industrial routers, home gateways, industrial and consumer laptops, rugged tablet PCs, video surveillance and digital signage.

CHIPSET - Qualcomm SDX55 , M.2 form factor

Available for orders - leadtime is one - two weeks, em9190 are all like new in perfect working conditoon, has a few scratches on surface, tested & upgrade to latest fw.

GT5G-CV M.2 NGFF TO Type-C USB 3.0 dongle - total New design for latest 5Gnr M.2 Modems  

Key Features
Compatibility is strong - Compatible with most M.2 interface 5G modules
Industrial - Industrial grade material design
USB Type-C 3.0 - USB Type-C 3.0 high speed interface

Compatible with most M.2 interface 5G modules
Special shield cover protection design to protect key devices from external force damage, corrosion aging
Nano SIM Card slot
No driver required, plug and play
Led indicators let you know your connection status immediately

USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

• Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
• Introduce integrated aluminum heat sink，make your 5G modem always cool.
• Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
• 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
• Adjust output to 3.7V. Prevent voltage drop when high data transfer .
• Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
• Use Nano SIM card slot , support hot swap simcard.
• ESD prtection at USB and SIM slot.
• Better performance, because of fast thermal module

Telit FN980 5G wireless module Specifications:

* Telit 5G Module

* Chipset: Qualcomm Snapdragon X55 5G

* 5G Sub-6 and mm Wave FDD and TDD, SA & NSA operations

* 5G core network Opt. 3a/3x and Opt. 2

* 4G: 7CA, up to 20 layers DL / 3CA UL,256 QAM DL/UL

* 3G: HSPA+ Rel. 8 (DL/UL 42/11 Mbps)

* Data Rates:

- 5G up to 5.5 Gbps DL/2.7 UL Gbps
- 4G up to 2.4 Gbps DL/211 Mbps UL
- 3G up to 42 DL/11 UL Mbps

* GNSS: gpsOne Gen9 L1 band on dedicated RF connector, L5 shared with cellular

* Voice support: VoLTE, VoNR (under evaluation), PCM audio over USB

* 4 antenna connectors for LTE/Sub-6

* 5G FR1 Bands: n1, n2, n3, n5, n7, n12, n14, n20, n28, n30, n41, n66, n71, n77, n78, n79

* 5G FR2 Bands: n257, n258, n260, 261

* LTE Bands: 1, 2, 3, 4, 5, 8, 9, 12, 13, 14, 17, 18, 19, 20, 26, 28, 71, 25, 66, 39, 29 (DL), 30, 32, 7, 38, 40, 41, 42, 43, 46 (LAA), 48(CBRS), 34, 27

* WCDMA Bands: 5, 8, 3, 4, 2, 1, 9, 19

* 5G 4x4 MIMO support on bands n1, n2, n7, n66, n3, n77, n78, n79, n41 and n30

* 4G 4x4 MIMO support on bands 32, 4, 66, 3, 2, 25, 1, 30, 40, 41, 7, 43, 42, 46, 48

* Interfaces
- 1.8/3 V SIM Interface
- USB 3.1 gen2 and 2.0
- PCIe gen3
- Drivers support: Windows 10, Linux

* Chipset: Qualcomm® Snapdragon™ X55

* Electrical & Sensitivity
- LTE/5G sub 6 Output power: -23 dBm (power class 3)
- Supply voltage: - Nominal: 3.3 VDC

* Antenna types: 4x LTE/Sub-6 + 4x QTM525/527

* FOTA Support

* Operating temperature range: -40°C to +85°C

* Dimensions: 30 x 50 x 3.5mm

* Approvals
- RED (planned)
- GCF (planned)
- Others (under evaluation)

Qualcomm IPQ 9574 AP.AL02.3 WIFI7 Mainboard Dream 9574 - samples ready for orders now

IPQ9570/IPQ9574 WiFi 7 (802.11be) 4×4 MU-MIMO DBDC Embedded Board, DR9574 board is using qsdk firmware with QCA drivers, no OpenWRT.

Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks

Available now in stock!

The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

• • Qualcomm-Atheros QCA9890, XB140 Reference Design
• • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• • Operating temperature range:-40 C to 75 C
• • 3X3 MIMO Technology & up to 1.3Gbps
• • MiniPCI Express 1.1 interface

LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.

We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17.
• 802.11ax/ac/b/g/n tri-band WiFi 6 E miniPCIE module

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Available Certifications

• Chipset: Qualcomm Atheros QCN9074
• Antenna: 4 x IPEX connectors, 4T4R
• Form Factor: Mini PCIe
• Interface: PCIe
• Support: Linux (Open Source) , Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Linux 5.9 FW Download Path - amss.bin + board.bin + m3.bin ( /lib/firmware/ath11k/QCN9074/hw1.0/)