Max. LAN Data Rate:1000Mbps

With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA2-PSK

Products Status: New

Type: Wireless

LAN Ports: 4

WAN Ports: 1

Certification: CE,ROHS,FCC

Main Chip: MT7621+MT7612+MT7603

Flash/RAM: 16M Flash+512M RAM

Wireless standard: 802.11b/g/n/ac

Interface: 4 LAN(10/100/1000M) /1 WAN

Wireless speed: Up to 1200Mbps

Maximum power: 12W

other Interface: 1 SIM 1 SD 1 USB port

Frequency Range:2.4 GHz and 5.8 GHz

Antenna: removable 4*5dBi antenna

WODAPLUG 4 PON GEPON OLT – FD1204SN WITH 2*10GB UPLINK AND L3 FEATURES

FD1204SN series provides 1 USB interface, 4 uplink combo interface, 2*10Gb uplink interface, and 4/8/16 EPON ports for downstream. It can support 256 ONUs under 1:64 splitter ratio.

Pizza-Box OLT series products is 1U high 19 inch rack mount product. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room environment.The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is a high  performance products.

MAIN FEATURES

xPON ONU Wodaplug ® FD504G-X-R410 4GE port, with EPON / GPON autodetect 

FD504G-X-R410 dual-mode ONU is one of the XPON optical network unit design to meet the requirement of the broadband access network.It apply in FTTH/FTTO to provide the data, video service based on the XPON network.

FD504G-X-R410 dual-mode ONU supports EPON and GPON two modes access. The ONU automatically switches into the corresponding PON mode by identifying the local OLT mode to complete GPON or EPON adaptive access.

FD504G-X-R410have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. Itfully meets the ITU-T and IEEE technical standards and have good compatibility with third party OLT.

SC/UPC single mode single fiber 

GPON：FSAN G.984.2 standard, Class B+ 

EPON：1000BASE-PX20+ symmetric 

GPON：2.488Gbps/1.244Gbps downstream/upstream 

EPON：1.25Gbps downstream/upstream

Wodaplug 5G 4G LTE Pigtail cable Ipex 1.0 U.FL-LP-040 for U.FL-R-SMT-1 connector Female / SMA Female 15cm, for miniPCIe modules

Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.

Wodaplug 5G LTE Ipex 1.0 Pigtail cable u.fl Female / SMA Female 15cm compatible with new 4G and 5G modules as is EC25, EP06, from quectell

Wodaplug 5G 4G LTE  Pigtail cable Ipex 4.0 head 1.20mm  Ø0.81mm cable , frequency MHF4 6GHz  Female / SMA Female 15cm, for M.2 modules with wide 1.5mm x height 0.6mm male ( quetel EM06 , EM12 , EM 20 , EM12-A , 5G RM500Q-GL etc.... )

Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.

Wodaplug 5G 4G LTE Ipex 4.0  Pigtail MHF4 Female / SMA Female 15cm thanks to new technologies compatible with new 5G & 4G modules as is EM06, EM12G , EM20G, RM500Q and many others M.2 LTE modules from quectel and Sierra Wireless and another brands

WLE600VX - 7C Industrial Grade (85°C) Dual Band 2×2 802.11ac miniPCIe Module

Availability confirmed for end Sept 2022 now! Pre-orders are required.

Qualcomm Atheros QCA9892 - Industrial Grade Chipset

• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)

• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n

• 2x2 MIMO Technology, up to 867Mbps

• Mini PCI Express edge connector

• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)

• Cards are individually calibrated for Quality Assurance

• Supports 4.9GHz operation

Certification :
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537)

WiFi6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD

AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

• Cinterion 5G IoT Module
• Global 5G coverage on one single SKU
• LTE Cat. 20 fallback
• LTE Advanced-Pro (3GPP Release 15)
• Dual SIM support with Dual Standby Single Active support
• GNSS: GPS, GLONASS, Galileo and Beidou

WPEQ-276AX

MU-MIMO WiFi 6/6E module for the 6GHz band, Mini PCIe Module, Qualcomm Atheros QCN9072, 2T2R

Quectel RM510Q-AE is a 5G module that is specially optimized for IoT/eMBB applications. Adopting 3GPP Release 15, it supports both 5G NSA and SA modes. Designed in M.2 form factor, RM510Q-GL can be easily embedded in customers’ applications.

Wodaplug H721 5G routers can support this brand new modules !

Full part no : RM510QGLHA-M20-SGASA

5G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA

Variant for EMEA/Australia/Brazil : EP06-ELA-512-SGA

LTE-A ready !! EP06-E PCIE has stop production as old version. But we still have 350pcs EP06-E PCIE in stock now !!

LTE FDD: B1/B3/B5/B7/B8/B20/B28
LTE TDD: B38/B40/B41
2×CA: B1+B1/B5/B8/B20/B28;
B3+B3/B5/B7/B8/B20/B28;
B7+B5/B7/B8/B20/B28;
B38+B38; B40+B40; B41+B41
WCDMA: B1/B3/B5/B8

Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)

LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems

Variant for America : EP06-A

LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.

LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
B29/B30/B66
LTE TDD: B41
2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
B4+B4/B5/B12/B13/B17/B26/B29;
B25+B5/B12/B13/B17/B25/B26/B29;
B30+B5/B12/B17/B26/B29; B41+B41
(Note: B29 is only for secondary
component carrier)
WCDMA: B2/B4/B5

Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)

LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems

Notice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem  support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.