802.11AC / AX WiFi solution
WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!
- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.
- HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.
-
DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6
$149.99DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support
Samples are available now! OpenWRT firmware and OpenWiFi supported
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.
Learn More
-
DR6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6. Wallys
$119.00DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports
Samples are available now! OpenWiFi and OpenWRT firmware supported.
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.
Learn More
-
Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01
$115.00Learn MoreMulti-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA
Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !
CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
- Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
- 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
- 256MB NAND Flash
- 32MB NOR Flash
- M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
- 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
- 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
- 1x 2.5Gbps Ethernet port
- 5x 1Gbps Ethernet ports
- 1x USB 2.0 Port
APPLICATIONS
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
• 802.11ax MU-MIMO OFDMA Access Point • Mesh router supporting EasyMesh • Smart AP TWT • Can support OpenWIFI firmware
This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc
-
QCA 9531 WPJ531HV-A Dual Radio Embedded Board ,16/64MB, on board 2.4GHz radio, 11n/11ac ready
$49.90Compex WPJ531HV-A Dual Radio Embedded Board gen3
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.
DC Power 1x DC Jack Connector: 24-56V
Power Over Ethernet 1x IEEE 802.3at or Passive PoE input minimum 36V
Power Consumption 7 Watts (Max)
SIM bay on board! Learn More
-
COMPEX WPJ563 HV Embedded Board with MiniPCI-e Slot, SIM card slot and 2.4GHz 3×3 MIMO Wireless on-Board, QCA9563
$99.99WPJ563-7A HV - Multi-function QCA9563 2.4GHz 3×3 MIMO Wireless Embedded Board with MiniPCI-e Slot and SIM card slot
Part no WPJ563 7A03PO16F1GAR-1
Lead time is 2-3 weeks now - available for orders now775MHz CPU / 2x GE Port / 1x Mini PCIe / Designed for 802.11ac
- Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
- 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
- 128MB System Memory
- 16MB NOR Flash
- 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
- Supports Dynamic Frequency Selection (DFS)
- Single SIM Holder on-board
- Support 2 x Gigabit Ethernet Port
Applications :
• 802.11g/n + 802.11a/n/ac Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
WPJ563 board provide Mini_PCIE slot for 3G/4G module,.LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
Power solution :
DC Jack: 12-24V
PoE: IEEE 802.3af 48V,
IEEE 802.3at 56V,
or Passive PoE 36-56V DC
Learn More
Currently Shopping by:
- Category: 11ac Wireless Embeded boards Remove This Item
Shopping Options
- Wireless modules QCA & MTK based
2,4 / 5GHz 802.11 ac ax be and latest WiFi 5, 6, 6E, 7 / 5G NR 4G Cellular LTE miniPCIe / M.2 modules and accessories
- 11ac/ax Wireless Embedded Boards
QCA IPQ Atheros CPU, gigabit ready, WiFi 5, 6, 7 onboard, 5G NR 4G LTE gateway hotspot mesh OpenWRT OpenWIFI
- QUECTEL best 4G LTE 5G NR modules
We offer most popular 4G LTE 5G NR cellular modem modules from Quectel and others. Wodaplug offers Ether over coax cable EOC and EPON XPON passive optical network products.
You have no items to compare.
From Twitter
Why to shop here
- Selling online over 21 years since 2003
- Unbeatable prices and services
- Fastest delivery & lowest shipping prices
- Winner of Best AFD-AT, Product of thre year
- Custom solutions for unusual settinngs
- Firmware requests and other solutions
-
$10 000 insurance per deal
