WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so on

Wireless：
Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
Software：
Preload the OpenWRT.
Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
Internet router and SMB router.

With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz

Model: 524LTE-TOF-0660-4DV-1

Electrical Specifications
Frequency-MHz 617-960/1710-3800/4900-6000
Gain-dBi 2.5 / 3.5 / 4
VSWR <2.5
Polarization Vertical
Horizontal Beam Width 360°
Vertical Beam Width 60°
Impedance 50 ohms
Max. Input Power 50W
Lightning Protection DC Ground

Mechanical Specifications
Connector 4×SMA male
Cable 1 meter RG405
Dimension Ø132*220 mm
Weight 1.2 kg
Mounting Mast Ø30-Ø50 mm
Radome Material UV PVC
Rate Wind Velocity 210km/h
Operating Temperature -40°C - +65°C

Pure 5g Whip4 4dBi 4G/5G Rubber Duck Stubby Antenna 600-6000MHz

21,5cm lenght

5G NR: n41/n77/n78/n79   ( Tested module ：MH5000-31、SIM8200EA、RM50xQ、Fibocom FM150、F02X。)

Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/B26/B28/B32

LTE-TDD: B34/B38/B39/B40/B41/B42/B43 

600-6000MHz

≤2.2 / 4DB / 50Ω / 50W / Length 21,5CM

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 2×2 MIMO, 4 - 6 dBi, 2×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6BV

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×2 MiMo antenna. The antenna has 2 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 2×RP-SMA male connector with 3m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 3×3 MIMO, 4 - 6 dBi, 3×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6CV

Powerful 3x3 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 3×3 MiMo antenna. The antenna has 3 outgoing cables and is especially suitable for routers with 3 connections. Also, 3 routers can be connected to 1 antenna. Because the antenna is equipped with 3×3 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 3 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 3xRP-SMA male connector with 3 m cable

524 Wi-Fi 6/6E 2.4/5/6GHz OMNIdirectional Dual Band Panel Antenna 4×4 MIMO, 4 - 6 dBi, 4×rSMA male connector, mounting kit

Model: 524WiFi-TOF-2472-6DV

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6/6E Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers with two antennas can be connected to this one antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6E or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500/4900-7125MHz frequency band on each port
• True gain: 4dBi@2.4GHz and 6dBi@5/6GHz
• Two independent vertical antennas in a single housing
• Outdoor pole mount installation
• Rugged UV Protected PVC antenna housing
• Dimensions: Φ128×220 mm
• 4xRP-SMA male connector with 3 m cable

524 WiFi AW7915-AED is a WiFi6 11ax 2T2R 1800Mbps M.2 Module AE Key by MTK MT7915DAN

AW7915-BMD is a WiFi6 11ax 2T2R 1800Mbps M.2 Module BM Key by MTK MT7915DAN

524 WiFi AW7915-AE1 is a WiFi6 11ax 4T4R 2401Mbps M.2 AE key Module by MT7915. Dual Bands selectable is configurable.

QCN9074 WIFI 6 11AX 4X4 WIFI MODULE - Pine Series WiFi Module:

Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E ! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-5G(PN02.1) based on QCN9074 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 5GHz Single Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

DR9074 5G and 6E modules are available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices! 

WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE  Pro+ MODEL PN02.1

QCN9074 / QCN6024 WIFI 6 11AX 4X4 WIFI DUAL BNAD Pro+ MODULE - selectable 2,4 ot 5GHZ:

DR9074E-DB based on QCN9074 or QCN6024  Chipset is an enterprise wireless module integrated with 4x4 or 2x2 MU-MIMO Dual Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters  designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

Features

■ Qualcomm Atheros QCN9074 or QCN6024

■ Maxim Tx power 20dBm per chain

■ Data Rateup to 4949Mbps

■ Support  2.412GHz-2.472GHz & 5.18GHz-5.825GHz

■ MiniPCIe connector

■ PCI Express 3.0 Interface

Applications

■ Security Surveillance

■ Commercial radio coverage

■ Hotel Wireless application

■ Forest fire protection engineering

■ Country coverage

■ Some special scene application

524 WiFi6 2T2R Dual Bands Dual Concurrent mini PCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 + MT7975 - Dream DR7915 NPD WiFi module, Pro+  - SALE !

DR7915 is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

DR7915 is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

524 WiFi 6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD2 Pro+ MMCX high power card

AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1×2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas MMCX RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

524WiFi AW7916-AED Wi-Fi 6E AX3000 M.2 AW Key Module, powered by Mediatek MT7916AN chipset –  802.11ax 3000 G-band 2T2R and A-band 3T3R 2ss Dual Bands Dual Concurrent 

The AW7916-AED is a cutting-edge M.2 AW Key Module that supports Wi-Fi 6E 3000, DBDC and is based on Mediatek MT7916AN. CE certified !

The AW7916-AED Wi-Fi 6E AX3000 M.2 AW Key Module is like a turbocharger for your Wi-Fi setup. It supports the super-fast Wi-Fi 6E 3000 and can handle three bands at once and DBDC. It’s powered by the powerful Mediatek MT7916AN chipset, so you know it means business. With blazing-fast speeds of up to 3Gbps, this module takes your wireless connectivity to a whole new level. It’s got your back whether you’re on the 5GHz or 6GHz band with a whopping 160MHz of bandwidth, and it even handles the 2.4GHz band with 40MHz. Plus, there’s an extra antenna to make sure your download speeds are top-notch.

This module can handle up to 24 users thanks to features like OFDMA and MU-MIMO, and it’s got a bunch of other technical stuff like 512 MAC entries and 16 MBSSID. It’s got all the cool features from Wi-Fi 6 Release 2. And here’s the magic trick: it has a built-in Wi-Fi offload engine, which means it’s not only powerful but also energy-efficient. It’s like having a high-performance engine in a small package. Plus, it’s easy on your wallet, thanks to its integration with the Filogic 630 platform. If you’re looking for Tri-band Wi-Fi 6/6E solutions for routers and repeaters, you can even pair it up with the Filogic 830 SoC platform. In a nutshell, the AW7916-AED is like the superhero of M.2 AW Key Modules. It’s super fast, super efficient, and super beneficial for both device makers and users.

AW7916-NPD is a WiFi6E 3000 highly advanced Mini PCIe Module with G-band 2T2R + A-band 3T3R 2ss Dual Bands Dual Concurrents (DBDC) based on Mediatek MT7916AN and MT7976 chip.

The capabilities enabling up to 3Gbps performance, supports 3×3 with 2 Spatial Streams for either 5 or 6GHz at maximum 160MHz bandwidth and 2×2 with 2 spatial streams for 2.4GHz at maximum 40MHz bandwidth. The additional 3rd antenna can be used for zero-wait DFS and/or MRC (up to 1024-QAM) for extra downlink (Rx) performance. Integrating the FEM radio into the Mediatek Filogic 630 platform yields integration advantages of smaller size and lower BOM costs for device makers.

Advanced access point features include up to 24 users (OFDMA), support of MU-MIMO clients, 512 MAC entries, 16 MBSSID and support for all Wi-Fi Alliance Wi-Fi 6 Release 2 features.

In addition, the chipset includes hardware-based Wi-Fi offload engine to alleviate the router AP from Wi-Fi connection-related processing, improving whole platform energy efficiency and performance. Filogic 630 can also be combined with Filogic 830 SoC platform for Tri-band Wi-Fi 6/6E solutions for Routers and Repeaters.

In stock, ready for shipment now! CED, FCC certified !

QCN9074 524 WIFI 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW ! Pine Series WiFi Module:

Wallys + 524wifi tech is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E. Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!  DR9074-6E(PN02.7) based on QCN9074 / 9024 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 6GHz Single Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide userswith mobile access to high-bandwidth video streaming, voice, and data transmission for officeand challenging RF environment in factories, warehouses establishment.

Wallys DR9074 5G and 6E modules and available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices! 

WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE Pro+ MODEL PN02.7

Wi-Fi Antenna ROD for 2.4 GHz and 5 GHz band, omni directional, 5 dBi peak gain in 2.4 GHz band and 3-4 dBi in 5GHz band. Reverse SMA connector. 

524WIFI 600VX ProPlus is tweaked advanced edition based on XB140 reference design from the QCA for QCA9880 chipset. XB140 is a dual band 802.11ac design. New module version for 2021-22 ! 524WIFI 600VX ProPlus / 900VX ProPlus changes the FEM, power, some RF circuit and layout. Ath10k driver supported. Available now in stock !

Please reffer to comparition protocol to see exact  improvements and real numbers. ProPlus means we tweaked the FEM, that is because we always work with the Skyworks; we added the power, we changed the RF and the layout for massively higher performance and drastically lowered working temperature, and we did many tests for it. Please chek our test reports in below links. Specially Designed for higher volume of clients & heavy loads. Tested and aplied in mass transport systems (pls reffer already working cases or send email to us for exact already working cases). CE RED , UK CA, IC Canada and FCC certified and full test reports available! FCC 4,9GHZ Certified for US!

Do you like our WiFi radio modules and want to test samples ? No problem ! Please contact us and provide your project description!

We supply wireless Wi-Fi data and 4G 5G LTE modules worldwide. There is no continent, where we would not have a satisfied customer! Yes, we have already supplied our Wi-Fi modules in Antarctica! You can find our modules, for example, in wind turbines, drones, ships, aircraft, both civil, acrobatic and military… on land, on water and in the air. NASA has also ordered samples, so the next goal is to get them into the outer Space!

524WIFI 900VX ProPlus is tweaked advanced edition based on XB140 reference design from the QCA for QCA9880 chipset. XB140 is a dual band 802.11ac design. New module version for 2021-22 ! 524WIFI 900VX ProPlus / 600VX ProPlus changes the FEM, power, some RF circuit and layout. Limited quantity available now in stock ! WPA3 supported in latest OpenWRT.

Please reffer to comparition protocol to see exact  improvements and real numbers. ProPlus means we tweaked the FEM, that is because we always work with the Skyworks; we added the power, we changed the RF and the layout for massively higher performance and drastically lowered working temperature, and we did many tests for it. Please chek our test reports in below links. Specially Designed for higher volume of clients & heavy loads. Tested and aplied in mass transport systems (pls reffer already working cases or send email to us for exact already working cases). CE RED , UK CA, IC Canada and FCC certified and full test reports available! FCC 4,9GHZ Certified for US!

Do you like our WiFi modules and want to test samples ? No problem ! Please contact us and provide your project description!

We supply wireless Wi-Fi data and 4G 5G LTE modules worldwide. There is no continent, where we would not have a satisfied customer! Yes, we have already supplied our Wi-Fi modules in Antarctica! You can find our modules, for example, in wind turbines, drones, ships, aircraft, both civil, acrobatic and military… on land, on water and in the air. NASA has also ordered samples, so the next goal is to get them into the outer Space!

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 2×2 MIMO, 10 - 13 dBi, 2×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13D

Powerful 2x2 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 2×42 MIMO antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 2 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 2×2 MOMO construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 2 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization,
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 205×180×45mm
• 2×N Female connector
• IP55 rain and dust resistant

524 Wi-Fi 6/6E 2.4/5/6GHz Directional Dual Band Panel Antenna 4×4 MIMO, 10 - 13 dBi, 4×N Female connector, mounting kit

Model: 524WiFi-TPC-2472-13BD

Powerful 4x4 MIMO External Antenna Kit specialy designed for Ultra clean data receiving WiFi 6 Routers and Hotspots (for most antennas sending / transmitting signal is not problem, but only best antennas handle receiving datas with best power / range / signal ratio) . Best data rates and perfect ratio price / power is main goal for 524WiFi antennas as we project our more than 20 years of experiences into those products. 524wifi.com

This 524WiFi antenna features a 4×4 MiMo antenna. The antenna has 4 outgoing cables and is especially suitable for routers with 4 connections. Also, 2 routers can be connected to 1 antenna. Because the antenna is equipped with 4×4 MiMo construction it is suitable for the MiMo technique (multiple in, multiple out). This means that the antenna internally consists of 4 antennas, so you experience the maximum speed and maximum reception with your WiFi or WiFi 6 or LTE  device. The antenna is suitable for all European & America networks.

• Operated at 2400-2500 , 4900-7125MHz frequency band
• True gain 13dBi for 4900-7125MHz frequency band and 10dBi for 2400-2500
• V/H dual polarization, 2*Vertical and 2*horizontal
• Directional antenna for outdoor point to point applications
• Pole mount for outdoor installation
• UV Protected ABS antenna housing for weatherproof
• Dimensions: 250×250×25mm
• 4×N Female connector
• IP55 rain and dust resistant

QCN9274 WIFI 7 11BE 4X4 WIFI MODULE - Waikiki WiFi Module - available for order and testing now ! lead tiem is 2-3weeks only

Features

■ Qualcomm Atheros QCN9274 for Industrial Grade;

■Maxim Tx power 20dBm per chain;

■ 4x 4 5G MU-MIMO, up to 5765Mbps physical data rate;

■ Support up to 4096-QAM;

■ M.2 connector;

■ PCI Express 3 .0 Interface

■ Latest Linux version can support Ath12k driver

DR9274-5G based on QCN9274 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment.

Specialy designed stable 3dB gain PUK omnidirection antenna for wild frequency range 700-2700 MHz for GSM 3G 4G or 5G use with LTE modules

Frequeny range: 700-2700 MHz

Bandwidth (MHz) 262/980MHZ

Input Impendence (Ω) 50

V.S.W.R ≤2 Gain (dBi) 3

Polarization Type Vertical polarization

Radiation Direction All (Omnidirectional)

Max Input Power (w) 50

Operating Temperature -20℃～+85℃

Storing Temperature -40℃～+85℃

Cable length (mm) 1000

Connector Type SMA

Dimension-mm Φ46*15

5G WWAN Card To RJ45 Adapter With SIM SloT

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

-------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------

M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc

USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play) 

Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator

- High-quality current inductance and Solid capacitor （1000μF）
- Additional Power supply connector Introduce.
- Aux Volt input support 5V
- Metal body case conduct the Heat.
- Mounting Hole for Flat or Mount.

V4 version - New feature:

A - Use new Power IC ,more stable than previous version.

B - addd New USB ESD protection,

C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)

D - adjust output to 3.8V，Prevent high data transfer voltage drop.

E - adjust AUX input  (5V~12V)

It's 5Gnr  version, support New 5G M.2 size (52cm length） with 6 antenna hole 

The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.

The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .

USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com

The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.

Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.

Sim slot with ESD protection

The enclosure can used on a desktop or mounted to a wall.

The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm

The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 （42mm modem lenght card） or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately

54~108Mbps 2.4/5GHz 100mW miniPCI radio  (EOL)

Compex WLM54AG-6B 20dBm miniPCI wireless network adapter offers high output power of 100mW. Built on Atheros chipset, Compex WLM54AG is designed according to IEEE802.11a/b/g standards. Compatible with all IEEE 802.11b/g WLAN, it is ideally suited for integration in a wide range of OEM devices.

* Compatible with IEEE 802.11 a/b/g (2.4/5GHz), speed up to 108Mbps
* "ClearVoice" band provides non-overlapping channels for fast-speed data transmission
* Supports Atheros' eXtended Range (XR) technology
* Capable of handling heavy data traffic such as sound and multi-media.
* Dynamic Frequency Selection (DFS) support: provides flexible selection of best frequency to allow mobility among all exisiting IEEE 802.11a/b/g networks.
* Wi-Fi Protected Access Client Support (WPA) & Wired Equivalent Privacy (WEP) provides powerful data security
* Transmission Power Control (TPC): offer flexibility to adjust RF output power
* Multi-country Roaming Support (IEEE802.11d):Automatically adjust regulatory domain to operate in different country
* Flexible design for embedded system or OEM project
DRIVER INFORMATION Driver Linux Madwifi, Windows XP, Windows 2000

C-DATA EOC Indoor Slave with WiFi router with wifi speed 300Mbps - CD5204W-B65S-R410, 300Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

Description

CD5204W-B65S-R410 EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Two WiFi antennas -  802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.