WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so on

Wireless：
Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
Software：
Preload the OpenWRT.
Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
Internet router and SMB router.

With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

Learn More

Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz

Model: 524LTE-TOF-0660-4DV-1

Electrical Specifications
Frequency-MHz 617-960/1710-3800/4900-6000
Gain-dBi 2.5 / 3.5 / 4
VSWR <2.5
Polarization Vertical
Horizontal Beam Width 360°
Vertical Beam Width 60°
Impedance 50 ohms
Max. Input Power 50W
Lightning Protection DC Ground

Mechanical Specifications
Connector 4×SMA male
Cable 1 meter RG405
Dimension Ø132*220 mm
Weight 1.2 kg
Mounting Mast Ø30-Ø50 mm
Radome Material UV PVC
Rate Wind Velocity 210km/h
Operating Temperature -40°C - +65°C

Learn More

QCN9074 WIFI 6 11AX 4X4 WIFI MODULE - Pine Series WiFi Module:

Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E ! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-5G(PN02.1) based on QCN9074 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 5GHz Single Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

DR9074 5G and 6E modules are available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices! 

WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE  Pro+ MODEL PN02.1

Learn More

5G WWAN Card To RJ45 Adapter With SIM SloT

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

Learn More

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Learn More

Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Learn More

-------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------

M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc

USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play) 

Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator

- High-quality current inductance and Solid capacitor （1000μF）
- Additional Power supply connector Introduce.
- Aux Volt input support 5V
- Metal body case conduct the Heat.
- Mounting Hole for Flat or Mount.

V4 version - New feature:

A - Use new Power IC ,more stable than previous version.

B - addd New USB ESD protection,

C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)

D - adjust output to 3.8V，Prevent high data transfer voltage drop.

E - adjust AUX input  (5V~12V)

It's 5Gnr  version, support New 5G M.2 size (52cm length） with 6 antenna hole 

The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.

The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .

USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com

The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.

Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.

Sim slot with ESD protection

The enclosure can used on a desktop or mounted to a wall.

The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm

The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 （42mm modem lenght card） or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately

Learn More

Key benefits

• Qualcomm Atheros QCN9024 chipset

• 5Ghz, 4x4 MU-MIMO OFDMA technology, up to 4804Mbps PHY rate

• Single band 5Ghz 4x4 Wi-fi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

Available for orders - lead time is 2-3 weeks, par no WLE3000H5 7A0924S Learn More

Key benefits

• Qualcomm Atheros QCN6023/6024/9024 Pine series chipset

• 2,4GHz, 2x2 MU-MIMO OFDMA up to 573Mbps PHY rate

• 5GHz, 2x2 MU-MIMO OFDMA up to 2402Mbps PHY rate

• Dual band selectable Wifi 6 (802.11ax)

• mPCIe interface with PCIe 3.0

• Heat sink allows free air operation

• Designed for High Bandwidth Enterprise Wireless Access Points

Samples available for order with 2 weeks lead time - the only available part no is WLE3002HX 7A0624S

Learn More

Key benefits • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset • 2,4GHz, 3x3 MU-MIMO OFDMA up to 1032Mbps PHY rate • 5GHz, 3x3 MU-MIMO OFDMA up to 3603Mbps PHY rate • Dual band selectable Wifi 6 (802.11ax) • mPCIe interface with PCIe 3.0 • Heat sink allows free air operation • Designed for High Bandwidth Enterprise Wireless Access Points Learn More

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

  

Learn More

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

Learn More

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

Learn More

Learn More