Search results for 'Quectel'
-
Quectel EG25-G Mini PCIe IoT/M2M-optimized LTE Cat 4 Module, EG25GGB-MINIPCIE
$49.00 As low as: $42.00EG25GGB-MINIPCIE is LTE category 4 module optimized for broadband IoT applications Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage Standard PCI Express® Mini Card form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices MIMO technology meets demands for data rate and link reliability in modem wireless communication systems Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
This version is without SIM slot on board
Frequency Bands
EG25-G Mini PCIe: LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8
Learn More
Data
LTE:
LTE-FDD: Max 150Mbps (DL)/Max 50Mbps (UL) LTE-TDD: Max 130Mbps (DL)/Max 30Mbps (UL)
UMTS:
DC-HSDPA: Max 42Mbps (DL) HSUPA: Max 5.76Mbps (UL) WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GSM:
EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL) GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL) -
ZBT WE1326 LTE router 4G 2.4GHz 5GHz 802.11b/g/n/ac MT7621 1SIM 1SDcard 1USB 4x5dBi antenna GoldenOrb Rooter OpenWRT
$49.00- Max. LAN Data Rate:1000Mbps
- With Modem Function: YES - but you need to buy LTE module separately compatible for yoru region. Quectel EC25, EP06, EM06, EM12, EM16 and more supported.
Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n- Wi-Fi Supported Frequency: 2.4G & 5G
- Wi-Fi Transmission Standard: 802.11ac
- Wired Transfer Rate: 10/100/1000Mbps
- 2.4G Wi-Fi Transmission Rate: 300 Mbps
- Encryption Type: WPA2-PSK
- Products Status: New
- Type: Wireless
- LAN Ports: 4
- WAN Ports: 1
- Certification: CE,ROHS,FCC
- Main Chip: MT7621+MT7612+MT7603
- Flash/RAM: 16M Flash+512M RAM
- Wireless standard: 802.11b/g/n/ac
- Interface: 4 LAN(10/100/1000M) /1 WAN
- Wireless speed: Up to 1200Mbps
- Maximum power: 12W
- other Interface: 1 SIM 1 SD 1 USB port
- Frequency Range:2.4 GHz and 5.8 GHz
- Antenna: removable 4*5dBi antenna
-
4G LTE router ZBT WG3526 MT7621 880MHZ 1200Mbps 5x1GB 1xUSB 3.0 1×SIM 1×SD 1× SATA 3.0 IEEE802.11AC/N/G/B/A SDK 4.2
$59.00WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so onWireless:
Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
Software:
Preload the OpenWRT.
Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
Internet router and SMB router.With Modem Function: YES - but you need to buy LTE module separately compatible for yoru region. Quectel EC25, EP06, EM06, EM12, EM16 and more supported.
Learn More -
DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi
$89.00IPQ 4019 / 4029 Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board
- Featuring with industrial-grade IPQ4019/IPQ4029 chipset
- Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module
- Support 4.940GHz to 5.825GHz Frequency Range
- Support 2.400GHz to 2.482GHz
- Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
- Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
- Support 11ABGN/AC
- RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
- FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
- Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
- USB 3.0 support ! miniPCIe LTE-A module supprted !
-
Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!
-
Quectel RM500Q-AE 5G NR global module 3GPP Release 15 NSA/SA operation, Sub-6 GHz M.2 socket
$229.005G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA
This version is replaced by newer version RM502Q-AE , please use this newer better versionQuectel RM500Q is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel. 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM500Q is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and Cat 16, Cat 18, Cat 20 module EM20, which will facilitate customers to migrate from LTE-A to 5G.5G NR: 3GPP Release 15 NSA/SA operation, Sub-6 GHzNSA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79SA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79DL 4 × 4 MIMO n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79UL 2 × 2 MIMO n41LTELTE Category DL Cat 16/ UL Cat 18LTE Bands B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/ B25/B26/B28/B29/B30/B32/B34/B38/B39/B40/B41/B42/ B43/B46(LAA)/B48/B66/B71DL 4 × 4 MIMO B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/ B42/B43/B48/B66UMTSWCDMA Bands B1/B2/B3/B4/B5/B6/B8/B19Embedded GNSS SupportedPCIe 3.0 Interface SupportedUSB 3.1 Interface SupportedeSIM Supported / Built-in eSIM (optional)Region GlobalCertification in progress: Carrier: AT&T*/ T-Mobile*/ Verizon*/ NTT DOCOMO*/ Telstra* Regulatory: GCF*/ PTCRB*/ CE/ RCM/ IC*/ FCC*/ JATE*/ TELEC*Learn More -
Wodaplug M.2 (NGFF ) to USB 3.0 Computer Adapter with SIM Card Slot for LTE 5G Modules
$28.99- Designed for desktop/Laptop PCs that convert wireless M.2 Card to USB 3.0 port. Ideal for LTE 5G modules like RM500Q.
- You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
- Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, Sierra Wireless , quectel, Simcom
- Support 30*42 type NGFF(M.2) Key B card
- Support SIM 6pin/8pin card connector.
-
- Attention - can not support WiFi modules !
-
mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, Rooter and OpenWRT firmware support, no USB port
$69.90Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included
Max. LAN Data Rate: 867Mbps
Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n
Wi-Fi Supported Frequency: 2.4G & 5G
Wi-Fi Transmission Standard: 802.11ac
Wired Transfer Rate: 10/100/1000Mbps
2.4G Wi-Fi Transmission Rate: 300 Mbps
Encryption Type: WPA-PSK
Function: FireWall, QoS, VPN
LANPorts:4 WAN Ports:1
Certification: FCC CE
5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)
Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !
Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)
Since the USB chip out of stock during long period, so the factory produced a batch of WG1608 routers without USB port.
Learn More -
5G USB 3.0 dongle 1 SIM bay for 5GNR M.2 modules 5GNR 5G 4G modems compatible - Quectel RM500Q RM510Q SIMCOM8200 4G M.2 Sierra Wireless etc
$52.00-------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------
M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc
USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play)
Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator
- High-quality current inductance and Solid capacitor (1000μF)
- Additional Power supply connector Introduce.
- Aux Volt input support 5V
- Metal body case conduct the Heat.
- Mounting Hole for Flat or Mount.V4 version - New feature:
A - Use new Power IC ,more stable than previous version.
B - addd New USB ESD protection,
C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
D - adjust output to 3.8V,Prevent high data transfer voltage drop.
E - adjust AUX input (5V~12V)
It's 5Gnr version, support New 5G M.2 size (52cm length) with 6 antenna hole
The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.
The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .
USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com
The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.
Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.
Sim slot with ESD protection
The enclosure can used on a desktop or mounted to a wall.
The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm
The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 (42mm modem lenght card) or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately
Learn More -
5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE
From: $155.50
To: $2,715.46
Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform).
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html
New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
Quectel RM502Q-AE 5G sub-6GHz M.2 LTE module
$239.00The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China. The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.
To run this module in our H721 router you need to switch modem data_interface to USB mode,
The version is RM502QAEAA-M20-SGASA - USB is turned on by default
- Global version expect China , recommended for Europe, US and Canada
Learn More -
Quectel RM510Q-GL 5G Sub-6 GHz & mmWave M.2 LTE Module
$299.00Quectel RM510Q-AE is a 5G module that is specially optimized for IoT/eMBB applications. Adopting 3GPP Release 15, it supports both 5G NSA and SA modes. Designed in M.2 form factor, RM510Q-GL can be easily embedded in customers’ applications.
Wodaplug H721 5G routers can support this brand new modules !
Full part no : RM510QGLHA-M20-SGASA
Learn More -
Quectel RM500Q-AE 4G / 5G / LTE M.2 NGFF Modem, Optimised IoT / M2M NSA and SA mode 5G NR Sub 6GHz Global module
$229.005G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA - Global version expect China , recommended for Europe, US and Canada
Quectel RM500Q is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel. 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM500Q is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and Cat 16, Cat 18, Cat 20 module EM20, which will facilitate customers to migrate from LTE-A to 5G.5G NR: 3GPP Release 15 NSA/SA operation, Sub-6 GHzNSA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79SA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79DL 4 × 4 MIMO n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79UL 2 × 2 MIMO n41LTELTE Category DL Cat 16/ UL Cat 18LTE Bands B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/ B25/B26/B28/B29/B30/B32/B34/B38/B39/B40/B41/B42/ B43/B46(LAA)/B48/B66/B71DL 4 × 4 MIMO B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/ B42/B43/B48/B66UMTSWCDMA Bands B1/B2/B3/B4/B5/B6/B8/B19Embedded GNSS SupportedPCIe 3.0 Interface SupportedUSB 3.1 Interface SupportedeSIM Supported / Built-in eSIM (optional)Region GlobalCertification in progress: Carrier: AT&T*/ T-Mobile*/ Verizon*/ NTT DOCOMO*/ Telstra* Regulatory: GCF*/ PTCRB*/ CE/ RCM/ IC*/ FCC*/ JATE*/ TELEC*Learn More -
Quectel RM502Q-AE 5G NR sub-6GHz M.2 LTE cellular module, Qualcomm Snapdragon X55 5G modem, support NA / NSA mode, 4G LTE-A, 4x4 MIMO
$239.00The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China. The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.
Version is RM502QAEAA-M20-SGASA - USB is turned on by default
- To run this module in our H721 router you need to switch modem data_interface to USB mode,
* Chipset: Qualcomm Snapdragon X55 5G modem
* Cover global 5G frequency bands - Global version expect China , recommended for Europe, US and Canada
* Multi-gigabit data rates, up to 5.0Gbps
* DL 4 × 4 MIMO for 5G NR and LTE-A bands
* Multi-constellation GNSS capabilities
* Abundant interfaces: USB 3.0/3.1, PCIe 3.0 and eSIM
- The global version RM502Q-AE nearly covers all the mainstream carriers worldwide. The 5G module supports Qualcomm® IZat™ location technology Gen9C Lite (GPS, GLONASS, BeiDou/Compass and Galileo). The integrated GNSS receiver greatly simplifies the product design and provides quicker, more accurate and more dependable positioning capability.
- A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB and PCIe drivers for Windows, Linux and Android) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC, video surveillance and digital signage.
-
Quectel EG25-G SIM Mini PCIe IoT/M2M-optimized LTE Cat 4 Module, SIM slot on board
$55.00EG25GGB-MINIPCIE-S is LTE category 4 module optimized for broadband IoT applications Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage Standard PCI Express® Mini Card form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices MIMO technology meets demands for data rate and link reliability in modem wireless communication systems Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
This version have nano SIM slot ( holder ) on board and lead time is 1-2 weeks, version is EG25GGBR07A08M2G_30.202.30.202
Frequency Bands
EG25-G Mini PCIe: LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8
Learn More
Data
LTE:
LTE-FDD: Max 150Mbps (DL)/Max 50Mbps (UL) LTE-TDD: Max 130Mbps (DL)/Max 30Mbps (UL)
UMTS:
DC-HSDPA: Max 42Mbps (DL) HSUPA: Max 5.76Mbps (UL) WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GSM:
EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL) GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL) -
Quectel RM505Q-AE 5G NR sub-6GHz M.2 LTE cellular module, Qualcomm Snapdragon X55 5G modem, support NA / NSA mode, 4G LTE-A, 4x4 MIMO
$399.00Quectel RM505Q-AE is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel-15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM505Q-AE is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 modules EM12-G/EM120R-GL/EM121R-GL, and Cat 16 module EM160RGL, which facilitates customers’ migration from LTE-A to 5G.
Led time is 2-3weeks now
- - 5G sub-6GHz module
- - 52.0mm × 30.0mm × 2.3mm
- - 8.7g
- - M.2 form factor
- - Max. downlink 2.5Gbps / 650Mbps uplink
- - Extended temperature range of -40°C to +85°C