GT5G-CV M.2 NGFF TO Type-C USB 3.0 dongle - total New design for latest 5Gnr M.2 Modems  

Key Features
Compatibility is strong - Compatible with most M.2 interface 5G modules
Industrial - Industrial grade material design
USB Type-C 3.0 - USB Type-C 3.0 high speed interface

Compatible with most M.2 interface 5G modules
Special shield cover protection design to protect key devices from external force damage, corrosion aging
Nano SIM Card slot
No driver required, plug and play
Led indicators let you know your connection status immediately

Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G version 7 now includes:

• 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
• Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

Sierra Wireless 5G Module

* 5G Category: 5G NR Sub-6
* 5G DL 4.5Gbps, UL 660Mbps
* Satellite Systems: Galileo, Glonass, GPS, Beidou (Bands: L1 and L5)
* Firmware: Secure boot, Pre-certified firmware
* Dual SIM single standby (DSSS) switches

The AirPrime® EM9190 M.2 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This device is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speed and up to 330 Mbps of uplink speed.

The EM9190 device is available in a 30 x 52 x 2.38 mm footprint. With automatic 4G and 3G fallback networks, and a built-in GNSS receiver, it can be used for a wide range of M2M and IoT applications such as industrial routers, home gateways, industrial and consumer laptops, rugged tablet PCs, video surveillance and digital signage.

CHIPSET - Qualcomm SDX55 , M.2 form factor

Available for orders - leadtime is one - two weeks, em9190 are all like new in perfect working conditoon, has a few scratches on surface, tested & upgrade to latest fw.

Telit FN980 5G wireless module Specifications:

* Telit 5G Module

* Chipset: Qualcomm Snapdragon X55 5G

* 5G Sub-6 and mm Wave FDD and TDD, SA & NSA operations

* 5G core network Opt. 3a/3x and Opt. 2

* 4G: 7CA, up to 20 layers DL / 3CA UL,256 QAM DL/UL

* 3G: HSPA+ Rel. 8 (DL/UL 42/11 Mbps)

* Data Rates:

- 5G up to 5.5 Gbps DL/2.7 UL Gbps
- 4G up to 2.4 Gbps DL/211 Mbps UL
- 3G up to 42 DL/11 UL Mbps

* GNSS: gpsOne Gen9 L1 band on dedicated RF connector, L5 shared with cellular

* Voice support: VoLTE, VoNR (under evaluation), PCM audio over USB

* 4 antenna connectors for LTE/Sub-6

* 5G FR1 Bands: n1, n2, n3, n5, n7, n12, n14, n20, n28, n30, n41, n66, n71, n77, n78, n79

* 5G FR2 Bands: n257, n258, n260, 261

* LTE Bands: 1, 2, 3, 4, 5, 8, 9, 12, 13, 14, 17, 18, 19, 20, 26, 28, 71, 25, 66, 39, 29 (DL), 30, 32, 7, 38, 40, 41, 42, 43, 46 (LAA), 48(CBRS), 34, 27

* WCDMA Bands: 5, 8, 3, 4, 2, 1, 9, 19

* 5G 4x4 MIMO support on bands n1, n2, n7, n66, n3, n77, n78, n79, n41 and n30

* 4G 4x4 MIMO support on bands 32, 4, 66, 3, 2, 25, 1, 30, 40, 41, 7, 43, 42, 46, 48

* Interfaces
- 1.8/3 V SIM Interface
- USB 3.1 gen2 and 2.0
- PCIe gen3
- Drivers support: Windows 10, Linux

* Chipset: Qualcomm® Snapdragon™ X55

* Electrical & Sensitivity
- LTE/5G sub 6 Output power: -23 dBm (power class 3)
- Supply voltage: - Nominal: 3.3 VDC

* Antenna types: 4x LTE/Sub-6 + 4x QTM525/527

* FOTA Support

* Operating temperature range: -40°C to +85°C

* Dimensions: 30 x 50 x 3.5mm

* Approvals
- RED (planned)
- GCF (planned)
- Others (under evaluation)

Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

The H721 v5G now includes:

• 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
• Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

• Version 2021 : Gain Improvement. OmniDirectional Antenna 4G 5G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz
• 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for outdoor LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
• Gain 7-10dbi,  SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
• Dimensions (cm) : 2000mm, water and wind resistant, Operates between -40° and +60° c
• Specialy tuned for LTE 4G 5G frequencies
• Cable lenght 2m (customisable 3m o 5m or 10m max)
• GE0006AA

• Designed for desktop/Laptop PCs that convert wireless M.2 Card to USB 2.0 port. Ideal for LTE 4G modules.
• You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
• Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, HUAWEI , Sierra Wireless , quectel
• Support 30*42 type NGFF(M.2) Key B card
• Support SIM 6pin/8pin card connector.
• • Attention - can not support WiFi modules !

Wodaplug USB adapter for miniPCIE 5G 4G LTE modules incl SIM bay

Supports USB bus interface of Mini-Cards such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, 5G and Mini-Card to desktop PC

Easy installation & no driver required, but make sure you have installed the software drivers for your WWAN card.

Support SIM 6pin/8pin card connector.

No additional power required

Supports Plug & Play and Hot-Swapping

Attention - can not support WiFi modules !