Currency:

Search results for 'Quectel'

Relevance
Set Ascending Direction

Grid List

30 per page

Items 1 to 30 of 70 total

Page:
  1. 1
  2. 2
  3. 3
  1. Dream 5018 M 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys

    $89.00

    Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

    Samples are available now!

     11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

    Dual-core ARM 64bit A53@1.0GHz Processor

    1G DDRL3L System Memory

    8MB NOR Flash, 256MB NAND Flash

    2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

    M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

    M.2 Card Slot for QCN9074 WIFI 6E Card

    M.2 Card Slot for QCN6122-6E Card

    M.2 Card Slot for QCN6102-5GCard

    Support Openwifi

    DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

    Learn More
  2. Mediatek MTK 7621 High performance Outdoor router H721 O, Dual SIM with 5G NR LTE-A & WiFi possibility, 1x LAN 1x WAN, 4x antena 1x M.2 USB3, 1x MiniPCIe, good outdoor enclosure, OpenWRT

    $169.00

    Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

    After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

    https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

    https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

    Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721O 5G NR outdoor version now includes:

    • outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

    Hardware: 

    MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    1x M.2 b.key USB 3.0 as 5Gnr interface,

    1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

    2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

    Lightning protection design

     Heat sink at botoon of 5Gnr modem

    NEW X-WRT firmware available !!!

     

    Learn More
  3. Quectel RM530N-GL 5G NR Sub6 and mmWAVE M.2 NGFF Modem, 3GPP Rel 16 NSA and SA operation, Global module, SDX62, 4x4 MIMO

    $259.00

    Quectel 5G NR RM530N-GL Glomal m.2 module, 4x4 MIMO DL, Cat16, IoT/eMBB-Optimized 5G Sub-6 GHz and mmWAVE

    • samples available for orders now with 1-2weeks lead time
    • Quectel 5G Sub6 and mmWave Module

    • Form factor: M.2 package

    • Target market: Global

    • 5G SA Sub-6 speeds: DL 2.4Gbps, UL 900Mbps

    • 5G NSA Sub-6 speeds: DL 3.2Gbps, UL 600Mbps

    • 5G NSA mmWave: Max. 4.0Gbps (DL)/ Max. 1.4Gbps (UL)

    • Control via AT Commands

    • Specially designed for IoT/eMBB application

    • 8.7g , 30mm × 52mm × 2.3mm, Extended temperature range of -40°C to +85°C

    Quectel RM530N-GL is a 5G module that is specially optimized for IoT/eMBB applications. Based on 3GPP Release 16, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM530N-GL is compatible with Quectel 5G modules from the Sub-6-only RM520N series, which facilitates customers' compatible designs for Sub-6 + mmWave devices and Sub-6-only devices.

    The RM530N-GL is an industrial-grade module for industrial and commercial applications only. The RM530N-GL covers nearly all of the main operators worldwide. The module supports Qualcomm IZatT™ location technology Gen9C Lite (GPS, GLONASS, BDS, Galileo, and QZSS). The integrated GNSS receiver greatly simplifies the product design, and also provides quicker, more accurate and more dependable positioning capability.

    Learn More
  4. QCN 9024 524 WiFi 6E Dream 9074E Qualcomm miniPCIe Dual band 5 or 6 GHz QCN9024 (11AX) 4X4 MU-MIMO WIFI radio MODULE, ProPlus

    $99.90

    QCN9074 or 9024 WIFI 6 / 6E 11AX 4X4 Dual Band Selectable 5GHz or 6GHz miniPCIe WIFI MODULE :

    Product Description - Testing samples available now !

    DR9074E based on QCN90X4 Chipset is an enterprise high power wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. 

    Features

    ■ Qualcomm Atheros QCN90X4

    ■ Maxim Tx power 20dBm per chain

    ■ Data Rateup to 4949Mbps

    ■ Support  5.180~5.825Ghz or 5.925GHz-7.125GHz or  5.180GHz- 7.125GHz

    ■ MiniPCIe connector

    ■ PCI Express 3.0 Interface

    Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

    Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

    Learn More
  5. Dream 5018 S 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys

    $89.00

    DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

    Samples are available now!

     11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

    Features:

    Dual-core ARM 64bit A53@1.0GHz Processor

    512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

    2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

    Support BT5.1

    M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

    M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

    POE 802.3 bt,at,af support

    Support Openwifi

    Product Description

    DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

    Learn More
  6. Quectel EM060K-GL LTE-A M.2 - optimized 3GPP Rel. 11 LTE 2xCA Cat 6 Module, Global version, 300Mbps downlink / 50Mbps uplink

    $69.90

    LTE-A EM060K-GL - Cat 6 module with an M.2 form factor measuring 42.0mm × 30.0mm × 2.3mm

    Features

    • LTE Cat 6 module
    • 42.0mm × 30.0mm × 2.3mm
    • Max. data rates of 300Mbps downlink / 50Mbps uplink
    • M.2 package, key-B
    • Extended temperature range of -40°C to +85°C
    • LTE-A Cat 6 module with M.2 form factor
    • Support DL 2 Carrier Aggregation and 64QAM
    • Worldwide LTE-A and UMTS/HSPA+ coverage
    • Built-in eSIM (optional), DSSA
    • Low power mode
    • Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    • MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
    • Powered by the Snapdragon® X12 LTE Modem from Qualcomm Technologies Inc
    Learn More
  7. Quectel EM120K-GL M.2 modul LTE-A IoT/M2M DL 3xCA Cat 12 Module global 600Mb downlink / 150Mb uplink

    $129.00

    Quectel EM12 4G IoT/M2M-optimized LTE-A Cat12 Module EM120K-GL 4G IOT Module Compatible EM06 EM16

    EM120K-GL 4G LTE Cat12 Module Specifications:

    * Product type: 4G Cellular Module
    * Category: LTE Cat12 , LTE-A
    * Chipset: Qualcomm
    * Form factor: M.2, key-B
    * Dimensions: 42.0 × 30.0 × 2.3mm
    * Frequency Bands:
    - LTE-FDD Bands: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B292/B30/B321/B66/B71
    - LTE-TDD Bands: B34/B38/B39/B40/B41/B42/B43/B463(LAA)/B48 (CBRS)
    - Up to 3 × CA: Intra-band and Inter-band
    - WCDMA: B1/B2/B3/B4/B5/B6/B8/B19

    Control via AT Commands: 3GPP TS27.007 and Quectel Enhanced AT Commands


    * Target Market: Global

    Learn More
  8. 524 LTE pure 5G 4x4 MIMO OMNI Outdoor Antenna 617 - 6000 MHz 4dBi 4G/5G 4xSMA LTE male Connector, global

    $55.00

    Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz


    Model: 524LTE-TOF-0660-4DV-1

    Electrical Specifications
    Frequency-MHz 617-960/1710-3800/4900-6000
    Gain-dBi 2.5 / 3.5 / 4
    VSWR <2.5
    Polarization Vertical
    Horizontal Beam Width 360°
    Vertical Beam Width 60°
    Impedance 50 ohms
    Max. Input Power 50W
    Lightning Protection DC Ground

    Mechanical Specifications
    Connector 4×SMA male
    Cable 1 meter RG405
    Dimension Ø132*220 mm
    Weight 1.2 kg
    Mounting Mast Ø30-Ø50 mm
    Radome Material UV PVC
    Rate Wind Velocity 210km/h
    Operating Temperature -40°C - +65°C

    Learn More
  9. Wallys QCA DR6018C v1 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, SFP port

    $115.00

    Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA

    Samples are available, higher quantity manufactured upon request with quick lead time.

    DR6018C v1 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

    • Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
    • 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
    • 256MB NAND Flash
    • 32MB NOR Flash
    • M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
    • 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
    • 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
    • 1x 2.5Gbps Ethernet port
    • 1x 1Gbps Ethernet port with POE , 3x 1Gbps Ethernet
    • 1x USB 2.0 Port , 1x SFP port
    • Support: QUECTEL RM500/502Q and QCN9074 WiFi 6E cards

    APPLICATIONS

    • 802.11ax MU-MIMO OFDMA Access Point    • Mesh router supporting EasyMesh , Hotel Wireless applications    • Smart AP TWT

    Product Description

    DR6018C V01 based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    Learn More
  10. 5G M.2 WWAN card to RJ45 adapter dongle with SIM slot for 5GNR M.2 modules 5GNR 5G 4G modems compatible - Quectel RM500Q RM502Q RM510Q SIMCOM8200 4G M.2 Sierra Wireless etc

    $59.90

    5G WWAN Card To RJ45 Adapter With SIM SloT

    Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

    The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

    The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
    The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

    User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

    Learn More
  11. Quectel RM520N-GL 5G / 4G / LTE - A M.2 NGFF Modem, 3GPP Rel 16 NSA and SA operation Sub 6GHz, Global module, SDX62, 4x4 MIMO

    $215.00

    Quectel 5G RM520N-GL Glomal m.2 module, 4x4 MIMO DL, Cat16, IoT/eMBB-Optimized 5G Sub-6 GHz

    • 5G NR Sub-6GHz module
    • M.2 form factor
    • 30mm × 52mm × 2.3mm
    • SA data rates: 2.4Gbps (DL) / 900Mbps (UL)
    • NSA data rates: 3.4Gbps (DL) / 550Mbps (UL)
    • Extended temperature range of -40°C to +85°C
    • 5G/4G/3G multi-mode module with M.2 form factor
    • optimized for IoT and eMBB applications
    • Worldwide 5G and LTE-A coverage
    • Both NSA and SA modes supported
    • Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    • Feature refinements: DFOTA and VoLTE (optional)

    Quectel RM520N-GL is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Release 16 technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM520N-GL is compatible with Quectel 5G module RM50xQ series, LTE-A Cat 6 module EM06, Cat 12 modules EM12/EM12xR/EM120K series and Cat 16 module EM160R-GL, which facilitates customers’ migration from LTE-A to 5G. RM520N-GL is an industrial-grade module for industrial and commercial applications only. The Global version RM520N-GL nearly covers all the mainstream carriers worldwide. The module supports Qualcomm® IZatTM location technology Gen9C Lite (GPS, GLONASS, BDS and Galileo). The integrated GNSS receiver greatly simplifies the product design and provides quicker, more accurate and more dependable positioning capability. A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB and PCIe drivers for Windows 7/8/8.1/10, Linux, Android) extend the applicability of the module to a wide range of eMBB and IoT applications such as industrial router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC, video surveillance and digital signage.

    Learn More
  12. Quectel EC25 - EUX miniPCIe - optimized LTE Cat 4 Module EC25-EUX PCIE EUROPE EMEA version

    $39.90

    Model: EC25EUXGA-128-SGNS - EC25-EUX PCIE - EMEA Europe + Thailand version

    LTE FDD: B1/B3/B7/B8/B20/B28A
    LTE TDD: B38/B40/B41
    WCDMA: B1/B8
    GSM: B3/B8

    Quectel EC25-EUX Mini PCIe Module is LTE Cat 4 wireless communication module specially designed for the M2M and IoT fields. This model is especially suitable for occasions that do not require high network speed but require stable and reliable LTE network connections.Adopting the 3GPP Rel. 11 LTE technology, it delivers maximum data rates up to 150 Mbps downlink and 50 Mbps uplink.

    Quectel EC25-EUX Mini PCIe Module Product Overview

    Quectel EC25-EUX Mini PCIe Module has built-in rich network protocols, integrates multiple industrial standard interfaces, and supports multiple drivers and software functions (such as USB virtual serial port driver under Windows 7/8/8.1/10, Linux, Android, etc. operating systems, eCall* Etc.); it has greatly expanded its application scope in the M2M and IoT fields, such as industrial-grade routers, industrial-grade PDAs, tablet computers, video surveillance, digital signage, etc.

    Quectel EC25-EUX Mini PCIe Module integrates a multi-constellation GNSS receiver, supporting GPS, GLONASS, BeiDou (Compass), Galileo and QZSS positioning technology, which can achieve faster, more accurate and more reliable Positioning. The built-in GNSS also greatly simplifies the design of customer applications.

    Learn More
  13. mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, USB 3.0 port, Rooter and OpenWRT firmware supported

    $69.90

    Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

    Max. LAN Data Rate: 867Mbps

    Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

    Wi-Fi Supported Frequency: 2.4G & 5G

    Wi-Fi Transmission Standard: 802.11ac

    Wired Transfer Rate: 10/100/1000Mbps

    2.4G Wi-Fi Transmission Rate: 300 Mbps

    Encryption Type: WPA-PSK

    Function: FireWall, QoS, VPN

    LANPorts:4 WAN Ports:1

    USB 3.0 port: 1 included

    Certification: FCC CE

    5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

    Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs),  Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

     

    Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

    Learn More
  14. ZBT WE1026-5.8G Vehicle Wireless 4G LTE Router , dual ban WiFi 2,4 + 5GHz, can support Quectel miniCPIe LTE-A modules

    $59.99

    WE1026 is a dual band 3G/4G Wi-Fi router (3G / 4G gateway) specially for Vehicles using. LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06. It has1 LAN port, support 802.11 a/b/g/n/ac and 3G/4G. This device has Wide Area Network VPN tunnel, Local Area Network Wi-Fi security authentication, 4G/3G and watchdog functions etc, to achieve wireless LAN seamless connection, automatic network redial to provide users with high-speed, secure, reliable mobile broadband services.It has a USB 2.0 data interface, a MICRO SD (TF) card interface, with larger storage function.

    This device with metal case and vehicle anti-interference design, to achieve excellent anti-interference performance. Also it uses vehicle power supply design, support 9V~28V Car power supply,can effectively prevent equipment damage from vehicle’s power fluctuations, it offers a wonderful solution for vehicle Wi-Fi such as bus Wi-Fi,car Wi-Fi, train Wi-Fi, taxi Wi-Fi etc. This device also widely used in Wi-Fi coverage project like Bus station, the Airport, Sea port etc. At the same time, it is also widely used in scenic where Wi-Fi coverage and other public places where Wi-Fi coverage of the Internet.

    • Special for Vehicles using;
    • Complies with 802.11b/g/n/a/ac. wireless protocol;
    • Support dual band 2.4G and 5G wifi signal + support 3G/4G at the same time;
    • LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06.
    • Support 4G / 3G watchdog function, automatic network redial.
    • Can be dialed through an external USB interface (need to mount USB 3G/4G Dongle )
    • Support GPS function (depending on 3G/4G module)
    • Support to automotive power 12V and 24V systems, the minimum operating voltage is 9V, the maximum operating voltage is 36V. The maximum can be withstand 174V duration 150ms surge voltage, meet to 5a, 5b standard of the car protection.
    Learn More
  15. Wodaplug 5G 4G LTE Pigtail cable Ipex 4.0 head 1.20mm MHF4 6GHz Female / SMA Female 25cm, for M.2 modules

    $5.99

    Wodaplug 5G 4G LTE  Pigtail cable Ipex 4.0 head 1.20mm  Ø0.81mm cable , frequency MHF4 6GHz  Female / SMA Female 25cm, for M.2 modules with wide 1.5mm x height 0.6mm male ( quetel EM06 , EM12 , EM 20 , EM12-A , 5G RM500Q-GL etc.... )

    Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.

    Wodaplug 5G 4G LTE Ipex 4.0  Pigtail MHF4 Female / SMA Female 15cm thanks to new technologies compatible with new 5G & 4G modules as is EM06, EM12G , EM20G, RM500Q and many others M.2 LTE modules from quectel and Sierra Wireless and another brands

    Learn More
  16. DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT

    $165.00

    Description

    DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    Learn More
  17. DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys

    $139.00

    Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

    ■ SMA Plug interface ■ Plastic rod of black

    ■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

    Dimension: 132x 119 x 34 mm

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
  18. DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT

    $149.00

    DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

    Learn More
  19. WNFQ-268AXI(BT) 802.11ax/ac/a/b/g/n Industrial Capable Tri-band WiFi Combo, M.2 2230 (E KEY) Module (WiFi 6), Qualcomm, 2T2R, Sparklan

    $59.90
    • Chipset: Qualcomm Atheros WCN6856
    • Antenna: 2 x IPEX MHF4 connectors, 2T2R
    • Interface: PCIe: WLAN
    • Supports Dual Band Dual Concurrent Design
    • Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 
    First Industrial Capable WiFi 6 / 6E Tri-band
    The Tri-band solution from Qualcomm brings DBDC features to M.2 2230 and Half Mini PCIe formfactor. WNFQ-268AXI(BT) / WPEQ-268AXI(BT) are powered by latest Qualcomm WCN6856 chip, provide industrial lifecycle, industrial temperature capability, and true SparkLAN technical support.
    Available Certifications
    Learn More
  20. WPEQ-405AX 4×4 MU-MIMO WiFi 6 module for the 5GHz band, Mini PCIe Module, Qualcomm Atheros QCN9074, 4T4R, Sparklan

    $73.00
    • Chipset: Qualcomm Atheros QCN9074
    • Antenna: 4 x IPEX connectors, 4T4R
    • Form Factor: Mini PCIe
    • Interface: PCIe
    • Support: Linux (Open Source) , Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

    Linux 5.9 FW Download Path - amss.bin + board.bin + m3.bin ( /lib/firmware/ath11k/QCN9074/hw1.0/)

    Learn More
  21. COMPEX WLE3003HX 11ax 3x3 mini PCIe 3.0 dual band selectable WiFi 6 radio module, Qualcomm, Atheros, QCN9024, QCN6024, QCN6023 Pine series, Compex

    $150.00
    Key benefits • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset • 2,4GHz, 3x3 MU-MIMO OFDMA up to 1032Mbps PHY rate • 5GHz, 3x3 MU-MIMO OFDMA up to 3603Mbps PHY rate • Dual band selectable Wifi 6 (802.11ax) • mPCIe interface with PCIe 3.0 • Heat sink allows free air operation • Designed for High Bandwidth Enterprise Wireless Access Points Learn More

    Out of stock

  22. COMPEX WLE3002HX 11ax 2x2 mini PCIe 3.0 dual band selectable WiFi 6 radio module, Qualcomm, Atheros, QCN9024, QCN6024, QCN6023 Pine series, Compex

    $129.00

    Key benefits

    • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset

    • 2,4GHz, 2x2 MU-MIMO OFDMA up to 573Mbps PHY rate

    • 5GHz, 2x2 MU-MIMO OFDMA up to 2402Mbps PHY rate

    • Dual band selectable Wifi 6 (802.11ax)

    • mPCIe interface with PCIe 3.0

    • Heat sink allows free air operation

    • Designed for High Bandwidth Enterprise Wireless Access Points

    Samples available for order with 2 weeks lead time - the only available part no is WLE3002HX 7A0624S

    Learn More
  23. Compex WLE3000H5 QCN 9024 WiFi 6 802.11ax 4x4 MU-MIMO 5Ghz single band mini PCIe module

    $199.00

    Key benefits

    • Qualcomm Atheros QCN9024 chipset

    • 5Ghz, 4x4 MU-MIMO OFDMA technology, up to 4804Mbps PHY rate

    • Single band 5Ghz 4x4 Wi-fi 6 (802.11ax)

    • mPCIe interface with PCIe 3.0

    • Heat sink allows free air operation

    • Designed for High Bandwidth Enterprise Wireless Access Points

    Available for orders - lead time is 2-3 weeks, par no WLE3000H5 7A0924S Learn More
  24. MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT

    $139.00

    Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

    The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G version 7 now includes:

    • 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
    • Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  25. LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design for Sierra wireless EM919x EM7690 Telit FN980 Thales MV31 Quectel RM500, RM502, RM520, SIM slot

    $52.00

    USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

    • Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
    • Introduce integrated aluminum heat sink,make your 5G modem always cool.
    • Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
    • 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
    • Adjust output to 3.7V. Prevent voltage drop when high data transfer .
    • Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
    • Use Nano SIM card slot , support hot swap simcard.
    • ESD prtection at USB and SIM slot.
    • Better performance, because of fast thermal module
    Learn More
  26. Quectel RM505Q-AE 5G NR sub-6GHz M.2 LTE cellular module, Qualcomm Snapdragon X55 5G modem, support NA / NSA mode, 4G LTE-A, 4x4 MIMO

    $399.00

    Quectel RM505Q-AE is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel-15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM505Q-AE is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 modules EM12-G/EM120R-GL/EM121R-GL, and Cat 16 module EM160RGL, which facilitates customers’ migration from LTE-A to 5G.

    Led time is 2-3weeks now

    • - 5G sub-6GHz module
    • - 52.0mm × 30.0mm × 2.3mm
    • - 8.7g
    • - M.2 form factor
    • - Max. downlink 2.5Gbps / 650Mbps uplink
    • - Extended temperature range of -40°C to +85°C
    Learn More
  27. Quectel EG25-G SIM Mini PCIe IoT/M2M-optimized LTE Cat 4 Module, SIM slot on board

    $55.00

    EG25GGB-MINIPCIE-S is LTE category 4 module optimized for broadband IoT applications Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage Standard PCI Express® Mini Card form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices MIMO technology meets demands for data rate and link reliability in modem wireless communication systems Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment

    This version have nano SIM slot ( holder ) on board and lead time is 1-2 weeks, version is EG25GGBR07A08M2G_30.202.30.202

    Frequency Bands

    EG25-G Mini PCIe: LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B6/B8/B19 GSM: B2/B3/B5/B8
    Data
    LTE:
    LTE-FDD: Max 150Mbps (DL)/Max 50Mbps (UL) LTE-TDD: Max 130Mbps (DL)/Max 30Mbps (UL)
    UMTS:
    DC-HSDPA: Max 42Mbps (DL) HSUPA: Max 5.76Mbps (UL) WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
    GSM:
    EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL) GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)

    Learn More
  28. Quectel RM502Q-AE 5G NR sub-6GHz M.2 LTE cellular module, Qualcomm Snapdragon X55 5G modem, support NA / NSA mode, 4G LTE-A, 4x4 MIMO

    The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China. The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.

    Version is RM502QAEAA-M20-SGASA   - USB is turned on by default 

    - To run this module in our H721 router you need to switch modem data_interface to USB mode,  

    * Chipset: Qualcomm Snapdragon X55 5G modem

    * Cover global 5G frequency bands - Global version expect China , recommended for Europe, US and Canada

    * Multi-gigabit data rates, up to 5.0Gbps

    * DL 4 × 4 MIMO for 5G NR and LTE-A bands

    * Multi-constellation GNSS capabilities

    * Abundant interfaces: USB 3.0/3.1, PCIe 3.0 and eSIM

    • Quectel RM502Q-AE is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Release 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, Quectel RM502Q-AE is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and EM120R-GL, and Cat 16 module EM160R-GL, which facilitates customers' migration from LTE-A to 5G.
    • The global version RM502Q-AE nearly covers all the mainstream carriers worldwide. The 5G module supports Qualcomm® IZat™ location technology Gen9C Lite (GPS, GLONASS, BeiDou/Compass and Galileo). The integrated GNSS receiver greatly simplifies the product design and provides quicker, more accurate and more dependable positioning capability.
    • A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB and PCIe drivers for Windows, Linux and Android) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC, video surveillance and digital signage.
    Learn More
  29. Quectel RM500Q-AE 4G / 5G / LTE M.2 NGFF Modem, Optimised IoT / M2M NSA and SA mode 5G NR Sub 6GHz Global module

    $229.00

    5G RM500Q-AE M.2 module RM500QAEAA-M20-SGASA - Global version expect China , recommended for Europe, US and Canada

    Quectel RM500Q is a 5G module optimized specially for IoT/eMBB applications. Adopting the 3GPP Rel. 15 LTE technology, it supports both 5G NSA and SA modes. Designed in an M.2 form factor, RM500Q is compatible with Quectel LTE-A Cat 6 module EM06, Cat 12 module EM12 and Cat 16, Cat 18, Cat 20 module EM20, which will facilitate customers to migrate from LTE-A to 5G.
    5G NR
                        : 3GPP Release 15 NSA/SA operation, Sub-6 GHz
    NSA Bands : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79
    SA Bands    : n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/ n66/n71/n77/n78/n79
    DL 4 × 4 MIMO  n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79
    UL 2 × 2 MIMO  n41
    LTE
    LTE Category      DL Cat 16/ UL Cat 18
    LTE Bands           B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/ B25/B26/B28/B29/B30/B32/B34/B38/B39/B40/B41/B42/ B43/B46(LAA)/B48/B66/B71
    DL 4 × 4 MIMO    B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/ B42/B43/B48/B66
    UMTS
    WCDMA Bands  B1/B2/B3/B4/B5/B6/B8/B19
    Embedded GNSS Supported
    PCIe 3.0 Interface Supported
    USB 3.1 Interface Supported
    eSIM Supported / Built-in eSIM (optional)
    Region Global
    Certification in progress: Carrier: AT&T*/ T-Mobile*/ Verizon*/ NTT DOCOMO*/ Telstra* Regulatory: GCF*/ PTCRB*/ CE/ RCM/ IC*/ FCC*/ JATE*/ TELEC*
    Learn More
  30. Quectel RM510Q-GL 5G Sub-6 GHz & mmWave M.2 LTE Module

    $299.00

    Quectel RM510Q-AE is a 5G module that is specially optimized for IoT/eMBB applications. Adopting 3GPP Release 15, it supports both 5G NSA and SA modes. Designed in M.2 form factor, RM510Q-GL can be easily embedded in customers’ applications.

    Wodaplug H721 5G routers can support this brand new modules !

    Full part no : RM510QGLHA-M20-SGASA

    Learn More
Relevance
Set Ascending Direction

Grid List

30 per page

Items 1 to 30 of 70 total

Page:
  1. 1
  2. 2
  3. 3