Currency:

Products tagged with 'module'

Name
Set Descending Direction

Grid List

5 per page

Items 1 to 5 of 23 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 524 WiFi 6 Dream 9074-5G Qualcomm PN02.1 Single band 5GHz QCN9074 / QCN9024 WIFI6 11AX 4X4 MU-MIMO WIFI MODULE, M.2 E key, Pro+

    $69.90

    QCN9074 WIFI 6 11AX 4X4 WIFI MODULE - Pine Series WiFi Module:

    Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E ! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-5G(PN02.1) based on QCN9074 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 5GHz Single Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    DR9074 5G and 6E modules are available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices! 

    WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE  Pro+ MODEL PN02.1

    KEY FEATURES
    • Qualcomm Atheros QCN 9074 / 9024 Reference Design PN02.1
    • 5GHz, max 23dBm per chain, up to 4949Mbps
    • Single Band 5GHz 4×4 WiFi 6 (802.11ax)
    • 4 spatial streams (4SS)
    • M.2 E Key Interface
    • PCI Express 3.0 Interface
    • Supports Dynamic Frequency Selection (DFS)

    Chipset Qualcomm Atheros QCN 9074 / 9024

    Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

    Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

    Learn More
  2. 524WiFi 600VX ProPlus 2x2 MIMO 802.11ac Mini PCIe Wi-Fi Module, Dual Band, 2,4GHz / 5GHz QCA 9880 advanced edition

    524WIFI 600VX ProPlus is tweaked advanced edition based on XB140 reference design from the QCA for QCA9880 chipset. XB140 is a dual band 802.11ac design. New module version for 2021-22 ! 524WIFI 600VX ProPlus / 900VX ProPlus changes the FEM, power, some RF circuit and layout. Ath10k driver supported. Available now in stock !

    Please reffer to comparition protocol to see exact  improvements and real numbers. ProPlus means we tweaked the FEM, that is because we always work with the Skyworks; we added the power, we changed the RF and the layout for massively higher performance and drastically lowered working temperature, and we did many tests for it. Please chek our test reports in below links. Specially Designed for higher volume of clients & heavy loads. Tested and aplied in mass transport systems (pls reffer already working cases or send email to us for exact already working cases). CE RED , UK CA, IC Canada and FCC certified and full test reports available! FCC 4,9GHZ Certified for US!

    Do you like our WiFi radio modules and want to test samples ? No problem ! Please contact us and provide your project description!

    We supply wireless Wi-Fi data and 4G 5G LTE modules worldwide. There is no continent, where we would not have a satisfied customer! Yes, we have already supplied our Wi-Fi modules in Antarctica! You can find our modules, for example, in wind turbines, drones, ships, aircraft, both civil, acrobatic and military… on land, on water and in the air. NASA has also ordered samples, so the next goal is to get them into the outer Space!

    Learn More
  3. 524WiFi 900VX ProPlus 3x3 MIMO 802.11ac Mini PCIe Wi-Fi Module, Dual Band, 2,4GHz / 5GHz QCA 9880 advanced edition

    524WIFI 900VX ProPlus is tweaked advanced edition based on XB140 reference design from the QCA for QCA9880 chipset. XB140 is a dual band 802.11ac design. New module version for 2021-22 ! 524WIFI 900VX ProPlus / 600VX ProPlus changes the FEM, power, some RF circuit and layout. Limited quantity available now in stock ! WPA3 supported in latest OpenWRT.

    Please reffer to comparition protocol to see exact  improvements and real numbers. ProPlus means we tweaked the FEM, that is because we always work with the Skyworks; we added the power, we changed the RF and the layout for massively higher performance and drastically lowered working temperature, and we did many tests for it. Please chek our test reports in below links. Specially Designed for higher volume of clients & heavy loads. Tested and aplied in mass transport systems (pls reffer already working cases or send email to us for exact already working cases). CE RED , UK CA, IC Canada and FCC certified and full test reports available! FCC 4,9GHZ Certified for US!

    Do you like our WiFi modules and want to test samples ? No problem ! Please contact us and provide your project description!

    We supply wireless Wi-Fi data and 4G 5G LTE modules worldwide. There is no continent, where we would not have a satisfied customer! Yes, we have already supplied our Wi-Fi modules in Antarctica! You can find our modules, for example, in wind turbines, drones, ships, aircraft, both civil, acrobatic and military… on land, on water and in the air. NASA has also ordered samples, so the next goal is to get them into the outer Space!

    Learn More
  4. 5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case

    $129.00

    Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  5. 5G USB 3.0 dongle 1 SIM bay for 5GNR M.2 modules 5GNR 5G 4G modems compatible - Quectel RM500Q RM510Q SIMCOM8200 4G M.2 Sierra Wireless etc

    $52.00

    -------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------

    M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc

    USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play) 

    Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator

    - High-quality current inductance and Solid capacitor (1000μF)
    - Additional Power supply connector Introduce.
    - Aux Volt input support 5V
    - Metal body case conduct the Heat.
    - Mounting Hole for Flat or Mount.

    V4 version - New feature:

    A - Use new Power IC ,more stable than previous version.

    B - addd New USB ESD protection,

    C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)

    D - adjust output to 3.8V,Prevent high data transfer voltage drop.

    E - adjust AUX input  (5V~12V)

    It's 5Gnr  version, support New 5G M.2 size (52cm length) with 6 antenna hole 

    The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.

    The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .

    USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com

    The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.

    Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.

    Sim slot with ESD protection

    The enclosure can used on a desktop or mounted to a wall.

    The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm

    The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 (42mm modem lenght card) or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately

    Learn More
Name
Set Descending Direction

Grid List

5 per page

Items 1 to 5 of 23 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5