WPEQ-261ACN(BT)

Learn More

WPEA-251ACNI(BT)

Learn More

Z2101AX-D Gigabit Ports WIFI 6 Mesh ROUTER

WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.

Relevant standards and specifications:

• USB3.0/USB2.0 Bus Standard

• IEEE802.11n/g/b/a/ac/ax

• IEEE802.3/802.3u/802.ab

 Main features of the product

1).Support IEEE 802.11ax/ac/n/11b/g standard.

2).1*WAN+3*LAN 10/100/1000Mbps ports.

3).1* USB 3.0 data interface.

4).High speed 1800Mbps,dualband and gigabit ports.

5).Support MESH automatic networking.

Learn More

Description

DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

Learn More

Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

■ SMA Plug interface ■ Plastic rod of black

■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

Dimension: 132x 119 x 34 mm

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

  

Learn More

DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

Learn More

• Chipset: Qualcomm Atheros QCN9074
• Antenna: 4 x IPEX connectors, 4T4R
• Form Factor: Mini PCIe
• Interface: PCIe
• Support: Linux (Open Source) , Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Linux 5.9 FW Download Path - amss.bin + board.bin + m3.bin ( /lib/firmware/ath11k/QCN9074/hw1.0/)

Learn More

WiFi 5 wave2 4T4R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7615NP1, DBDC 

Chipset: MTK MT7615N

Interface: Normal Gold Finger miniPCIE

AW7615-NP1 is a 11ac WiFi Mini PCIe standard full-size Module based on Mediatek MT7615 which supports 1.7 Gbps PHY rate and Dual Bands Dual Concurrents (DBDC).

It fully complies with IEEE802.11ac and IEEE802.11 a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7615 is designed to support standard based features in the areas of security,quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band (DBDC, Dual-Band-Dual-Concurrent).

With the advent of 802.11ac, multi-user MIMO (MU-MIMO) is defined. MT7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum.

 

Learn More

524WiFi AW7916-AED Wi-Fi 6E AX3000 M.2 AW Key Module, powered by Mediatek MT7916AN chipset –  802.11ax 3000 G-band 2T2R and A-band 3T3R 2ss Dual Bands Dual Concurrent 

The AW7916-AED is a cutting-edge M.2 AW Key Module that supports Wi-Fi 6E 3000, DBDC and is based on Mediatek MT7916AN. CE certified !

The AW7916-AED Wi-Fi 6E AX3000 M.2 AW Key Module is like a turbocharger for your Wi-Fi setup. It supports the super-fast Wi-Fi 6E 3000 and can handle three bands at once and DBDC. It’s powered by the powerful Mediatek MT7916AN chipset, so you know it means business. With blazing-fast speeds of up to 3Gbps, this module takes your wireless connectivity to a whole new level. It’s got your back whether you’re on the 5GHz or 6GHz band with a whopping 160MHz of bandwidth, and it even handles the 2.4GHz band with 40MHz. Plus, there’s an extra antenna to make sure your download speeds are top-notch.

This module can handle up to 24 users thanks to features like OFDMA and MU-MIMO, and it’s got a bunch of other technical stuff like 512 MAC entries and 16 MBSSID. It’s got all the cool features from Wi-Fi 6 Release 2. And here’s the magic trick: it has a built-in Wi-Fi offload engine, which means it’s not only powerful but also energy-efficient. It’s like having a high-performance engine in a small package. Plus, it’s easy on your wallet, thanks to its integration with the Filogic 630 platform. If you’re looking for Tri-band Wi-Fi 6/6E solutions for routers and repeaters, you can even pair it up with the Filogic 830 SoC platform. In a nutshell, the AW7916-AED is like the superhero of M.2 AW Key Modules. It’s super fast, super efficient, and super beneficial for both device makers and users.

Learn More

524 WiFi AW7915-AED is a WiFi6 11ax 2T2R 1800Mbps M.2 Module AE Key by MTK MT7915DAN

524 WiFi AW7915-AED is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 573+1201 Mbps PHY rate with PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. The most important is one module could be Dual Bands Dual Concurrent (DBDC), means 2.4GHz and 5GHz simultaneously operated. , samples available for orders now with 1-2weeks leadtime.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

Learn More

Qualcomm QCA 9882 2x2 MIMO - WDS WLE600VX - 7A - 802.11ac 2.4/5GHz miniPCIe WiFi Radio Solution

limited quantity (2000+pcs) available for orders with delivery time 2-3 weeks - please contact us by email if you are interested in this modules

The WLE600VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9882 chipset, the WLE600VX dramatically increases the overall throughput up to 867Mbps with 2 x 2 MIMO technique. Leveraging the revolutionary 11ac technology, WLE600VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE600VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

Certification :
CE RED, FCC, UK-CA

Learn More

WLE900V5-27ESD - 5GHz High Power 3×3 MIMO 802.11ac Wave 1 Module

Learn More

QCA 9880 WLE900VX - 7A 802.11ac 3x3 MIMO miniPCIe module - available again now - or you can also use 524wifi900vx Pro+ or Sparklan modules with identical chipset

802.11ac 2.4/5GHz miniPCIe Radio Solution

The WLE900VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9880 chipset, the WLE900VX dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE900VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

Dual Band 3×3 MIMO 802.11ac Wave 1 Module

• Qualcomm-Atheros QCA9880
• XB140 Reference Design
• 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• 3X3 MIMO Technology & up to 1.3Gbps
• MiniPCI Express 1.1 interface

Learn More

802.11a/b/g/n Half Mini PCIe Module, Atheros AR9382, 2T2R

 Chipset: Atheros AR9382

• Antenna: 2xIPEX connectors, 2T2R
• Interface: PCIe: WLAN
• Output Power up to 17dBm
• Support: Windows XP/7/8.1/10, Linux

SparkLAN WPEA-121N WiFi PCI express card, embedded with Atheros AR9382 chipset, is incorporated with Atheros XSPAN with Signal Sustain Technology (SST). The 11n Daul-Band PCIe supports 2T2R (2-stream) MIMO technology, which delivers superior throughput up to 300Mbps and improves the overall WiFi coverage area.

The module adopts the latest 802.11n Dual-Band technology (2.4GHz and 5GHz). It targets enterprise and high-end consumer notebooks. The solution enables up to 6 times the throughput of 802.11a/g solutions.

WPEA-121N, featuring Atheros’ highest level of 802.11n WLAN throughput, enables a high performance, cost effective, low power, and compact solution for developers to easily integrate with embedded computing platforms.

Learn More

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17. 

Learn More

• Chipset: Qualcomm Atheros WCN6856
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN
• Supports Dual Band Dual Concurrent Design
• Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17.
• 802.11ax/ac/b/g/n tri-band WiFi 6 E miniPCIE module

Learn More

Advanced 802.11ac combo SoC - this module is EOL - you can use Intel AC7265 module as substitue 

Advanced 802.11ac features such as MU-MIMO, Host wake-on-wireless and ARP (Address Resolution Protocol) offloading enable the WLAN link to remain associated for extended periods for additional power savings

Supports dual-mode Bluetooth 5  - QCA9377 supports Bluetooth for Class-1 and Class-2 transmissions without requiring an external power amplifier Advanced WLAN/Bluetooth coexistence and concurrent RX WLAN/Bluetooth coexistence allows for superior rateover-range throughput and low-latency performance in real-world operating conditions Power saving techniques for low power consumption

Both WLAN and Bluetooth power management utilize advanced power saving techniques such as: - gating clocks to idle or inactive blocks - voltage scaling - fast start and settling circuits - active duty cycles - processor frequency scaling

Learn More

Features

Support 1 pcs  M.2 card

Support Intel AX200NGW 

Support DR9074 - 5G / 6E WIFI 6 modules

RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals  

Product Description

DR3G11 is an adapter card with one  M.2 slot. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest  m.2 interface cards. Each comes with both low and regular profile brackets.  Brackets include holes for mounting SMA connectors, or for using as cable exit holes.

Learn More

Essentials

• Weight (in grams)2.4
• Operating Temperature Range0°C to 80°C
• Supported Operating SystemsWindows 10, 32-bit*, Windows 10, 64-bit*, Windows 8.1, 32-bit*, Windows 8.1, 64-bit*, Windows 8, 32-bit*, Windows 8, 64-bit*, Windows 7, 32-bit*, Windows 7, 64-bit*, Linux*
• Antenna2x2
• Can serve as QCA 9377 subtitute module

Networking Specifications

• TX/RX Streams2x2
• Bands2.4 GHz, 5 GHz
• Max Speed867 Mbps
• Wi-Fi CERTIFIED*802.11ac
• ComplianceFIPS, FISMA
• Bluetooth Version4.2
• Integrated BluetoothYes

Package Specifications

• Board Form FactorM.2 2230, M.2 1216
• Package Size22mm x 30mm x 2.4mm, 12mm x 16mm x 1.8mm
• System Interface TypeWi-Fi(PCIe), BT(USB)

Advanced Technologies

• MU-MIMO No
• Supported Under Intel® vPro™ Technology Yes

Learn More

COMPEX WLE1216V5-20 MU-MIMO 4 X 4 802.11ac miniPCIe Wawe2 Radio module, QCA 9984 chip, 5GHz, single band, 20dBm

Model: WLE1216V5-20 - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0 Standard form factor
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead

The WLE1216V5-20 is a IEEE 802.11ac wireless adapter that operates in 5GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset( "Cascade" series), the WLE1216V5-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11ac technology, WLE1216V5-23 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise aplications.The WLE1216V5-20 is backward compatible with 802.11a/n and fully supports industry standards compliant security.

Max connected clients for wle1216V5-20 in wpq864 is about 500users. (class B, C Network) !!!
Wave 2 Board Data :
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)
Learn More

COMPEX WLE1216V2-20 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe WiFi MODULE - MOQ 20pcs, lead time 2-3 weeks

Model: WLE1216V2-20-CUS239-4A-TE - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0

Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead.

The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.

Product Highlights

• Qualcomm Atheros ‘Cascade’ QCA9984
• 2.4GHz max 20dBm output power (per chain)
• Heat sink allows free air operation
• IEEE 802.11b/g/n compliant, up to 800Mbps
• Multi-user MIMO (MU-MIMO) beamformer
• Mini PCI Express 2.0 interface
• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
• Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
• Supports Dynamic Frequency Selection (DFS)
• Designed for High Bandwidth Enterprise Wireless Access Points

https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)

Learn More

DRA24126ESBE -  External rSMA dipol omni antenna

Learn More

Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks

Available now in stock!

The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE

• • Qualcomm-Atheros QCA9890, XB140 Reference Design
• • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• • Operating temperature range:-40 C to 75 C
• • 3X3 MIMO Technology & up to 1.3Gbps
• • MiniPCI Express 1.1 interface

LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.

We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module

Learn More

Features

Support 4pcs Mini PCIE cards or 4 pcs M.2 cards , can support DR9074 QCN 9074 / 9072 modules

RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals  

 

Product Description

4G41 is an adapter card with four MiniPCIe and four M.2 slots. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest miniPCIe and m.2 interface cards. Comes with regular profile bracket. 

Bracket include holes for mounting SMA connectors, or for using as cable exist holes.

Available for orders

Learn More

DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support

Samples are available now! OpenWRT firmware and OpenWiFi supported

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.

Learn More

Learn More

Learn More

CompexWPJ531LV-A Dual Radio Embedded Board gen3 - available again, but MOQ is 50pcs - lead time is 2-3 weeks now

part no: WPJ531LV 7A07P01612AR-1 (no SIM slot)
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available.

Learn More

DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports

Samples are available now! OpenWiFi and OpenWRT firmware supported.

 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor  1GB DDRL3L System Memory  8MB NOR Flash, 256MB NAND Flash  Supports Dynamic Frequency Selection (DFS  2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate  2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

Learn More