802.11AC / AX WiFi solution
WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!
- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.
- HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.
-
WPEQ-268AXI(BT) 802.11ax/ac/a/b/g/n Industrial Capable Tri-band WiFi Combo, Half Mini PCIe Module(WiFi 6), Qualcomm, 2T2R, Sparklan
$59.90- Chipset: Qualcomm Atheros WCN6856
- Antenna: 2 x IPEX MHF4 connectors, 2T2R
- Interface: PCIe: WLAN
- Supports Dual Band Dual Concurrent Design
- Support: Windows, Linux (Open Source) - Linux driver adapts open source driver ath11k, minimum kernel version requirement is 5.17.
- 802.11ax/ac/b/g/n tri-band WiFi 6 E miniPCIE module
First Industrial Capable WiFi 6 / 6E Tri-bandThe Tri-band solution from Qualcomm brings DBDC features to M.2 2230 and Half Mini PCIe formfactor. WNFQ-268AXI(BT) / WPEQ-268AXI(BT) are poweredby latest Qualcomm WCN6856 chip, provide industrial lifecycle, industrial temperature capability, and true SparkLAN technical support.Available Certifications -
Qualcomm Atheros QCA 9377 dual-band WiFi AC Bluetooth wireless network card
$17.00Advanced 802.11ac combo SoC - this module is EOL - you can use Intel AC7265 module as substitue
Advanced 802.11ac features such as MU-MIMO, Host wake-on-wireless and ARP (Address Resolution Protocol) offloading enable the WLAN link to remain associated for extended periods for additional power savings
Supports dual-mode Bluetooth 5 - QCA9377 supports Bluetooth for Class-1 and Class-2 transmissions without requiring an external power amplifier Advanced WLAN/Bluetooth coexistence and concurrent RX WLAN/Bluetooth coexistence allows for superior rateover-range throughput and low-latency performance in real-world operating conditions Power saving techniques for low power consumption
Both WLAN and Bluetooth power management utilize advanced power saving techniques such as: - gating clocks to idle or inactive blocks - voltage scaling - fast start and settling circuits - active duty cycles - processor frequency scaling
Learn More -
Wallys DR3G11 Linux PC PCIe adapter for M.2 WiFi modules, 1x M.2 slot to PC PCIe adapter
$30.00Features
Support 1 pcs M.2 card
Support Intel AX200NGW
Support DR9074 - 5G / 6E WIFI 6 modules
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description
DR3G11 is an adapter card with one M.2 slot. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest m.2 interface cards. Each comes with both low and regular profile brackets. Brackets include holes for mounting SMA connectors, or for using as cable exit holes.
Learn More -
Intel MC-AC7265 PCI-E 1200Mbps Wireless Mini WiFi + Bluetooth 4 Network Card 802.11ac
$15.00Essentials
- Weight (in grams)2.4
- Operating Temperature Range0°C to 80°C
- Supported Operating SystemsWindows 10, 32-bit*, Windows 10, 64-bit*, Windows 8.1, 32-bit*, Windows 8.1, 64-bit*, Windows 8, 32-bit*, Windows 8, 64-bit*, Windows 7, 32-bit*, Windows 7, 64-bit*, Linux*
- Antenna2x2
- Can serve as QCA 9377 subtitute module
Networking Specifications
- TX/RX Streams2x2
- Bands2.4 GHz, 5 GHz
- Max Speed867 Mbps
- Wi-Fi CERTIFIED*802.11ac
- ComplianceFIPS, FISMA
- Bluetooth Version4.2
- Integrated BluetoothYes
Package Specifications
- Board Form FactorM.2 2230, M.2 1216
- Package Size22mm x 30mm x 2.4mm, 12mm x 16mm x 1.8mm
- System Interface TypeWi-Fi(PCIe), BT(USB)
Advanced Technologies
- MU-MIMO No
- Supported Under Intel® vPro™ Technology Yes
-
QCA 9984 WLE1216V5-20 5GHz 4×4 MU-MIMO 802.11ac Wave 2 80+80MHz Module, single band, 20dBm, COMPEX
$95.00COMPEX WLE1216V5-20 MU-MIMO 4 X 4 802.11ac miniPCIe Wawe2 Radio module, QCA 9984 chip, 5GHz, single band, 20dBm
Model: WLE1216V5-20 - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0 Standard form factor
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead
The WLE1216V5-20 is a IEEE 802.11ac wireless adapter that operates in 5GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset( "Cascade" series), the WLE1216V5-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11ac technology, WLE1216V5-23 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise aplications.The WLE1216V5-20 is backward compatible with 802.11a/n and fully supports industry standards compliant security.
Max connected clients for wle1216V5-20 in wpq864 is about 500users. (class B, C Network) !!!
Wave 2 Board Data :
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Can work with Ath10driver well :-)
Learn More -
QCA9984 WLE1216V2-20 2,4GHz 4×4 MU-MIMO 802.11n miniPCIe Module, single band, 20dBm, COMPEX
$95.00COMPEX WLE1216V2-20 2,4 GHZ 4X4 MU-MIMO 802.11n miniPCIe WiFi MODULE - MOQ 20pcs, lead time 2-3 weeks
Model: WLE1216V2-20-CUS239-4A-TE - QCA 9984 chip - 4* ufl - MiniPCIe pin v2.0
Available for orders with 2-3weeks lead time, or you can use MT7915 wifi6 modules instead.
The WLE1216V2-20 is a IEEE 802.11n wireless adapter that operates in 2,4GHz bands, available in PCIe mini card Standard form factor. Featuring QCA9984 chipset ("Cascade" design), the WLE1216V2-20 dramatically increases the overall throughput up to 1.73Gbps with 4 x 4 MIMO technique. Leveraging the revolutionary 11n technology, WLE1216V2-20 sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications.The WLE1216V2-20 is backward compatible with 802.11g/n and fully supports industry standards compliant security.Product Highlights
- Qualcomm Atheros ‘Cascade’ QCA9984
- 2.4GHz max 20dBm output power (per chain)
- Heat sink allows free air operation
- IEEE 802.11b/g/n compliant, up to 800Mbps
- Multi-user MIMO (MU-MIMO) beamformer
- Mini PCI Express 2.0 interface
- Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
- Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w , and z standards
- Supports Dynamic Frequency Selection (DFS)
- Designed for High Bandwidth Enterprise Wireless Access Points
https://wiki.compex.com.sg/wiki/802.11ac_Wave_2_Board_Data
Learn More
Can work with Ath10driver well :-) -
Wallys WiFi 6E mini rSMA dipol omni antenna, 3 - 4 dBi, 2.4 -2.5 & 5.15 - 7.15 GHz frequency, model DRA24126ESBE
$15.00DRA24126ESBE - External rSMA dipol omni antenna
2.4~2.5&5.15~7.15GHz of frequencyPlastic rod of BlackRoHS compliance3 - 4 dBi gainLearn More -
COMPEX QCA9890 WLE900VX - i 7BA Industrial-grade 3*3 802.11ac Dual band Radio miniPCIe module
$56.00Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks
Available now in stock!
The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.
DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE
- • Qualcomm-Atheros QCA9890, XB140 Reference Design
- • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
- • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
- • Operating temperature range:-40 C to 75 C
- • 3X3 MIMO Technology & up to 1.3Gbps
- • MiniPCI Express 1.1 interface
LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module
Learn More -
Wallys 2G41 Linux PCIe adapter for miniPCIe and M.2 WiFi modules, 4*miniPCIE slot to PCIe adapter
$79.90Features
Support 4pcs Mini PCIE cards or 4 pcs M.2 cards , can support DR9074 QCN 9074 / 9072 modules
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description
4G41 is an adapter card with four MiniPCIe and four M.2 slots. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest miniPCIe and m.2 interface cards. Comes with regular profile bracket.
Bracket include holes for mounting SMA connectors, or for using as cable exist holes.
Available for orders
Learn More -
DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6
$149.99DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support
Samples are available now! OpenWRT firmware and OpenWiFi supported
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.
Learn More -
DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi
$89.00IPQ 4019 / 4029 Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board
- Featuring with industrial-grade IPQ4019/IPQ4029 chipset
- Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module
- Support 4.940GHz to 5.825GHz Frequency Range
- Support 2.400GHz to 2.482GHz
- Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
- Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
- Support 11ABGN/AC
- RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
- FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
- Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
- USB 3.0 support ! miniPCIe LTE-A module supprted !
-
Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!
-
Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01
$115.00Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA
Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !
CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
- Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
- 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
- 256MB NAND Flash
- 32MB NOR Flash
- M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
- 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
- 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
- 1x 2.5Gbps Ethernet port
- 5x 1Gbps Ethernet ports
- 1x USB 2.0 Port
APPLICATIONS
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
• 802.11ax MU-MIMO OFDMA Access Point • Mesh router supporting EasyMesh • Smart AP TWT • Can support OpenWIFI firmware
This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc
-
QCA 9531 WPJ531LV-A Dual Radio Embedded Board, 16/64MB, on board 2.4GHz radio, 11n/11ac ready
$75.00CompexWPJ531LV-A Dual Radio Embedded Board gen3 - available again, but MOQ is 50pcs - lead time is 2-3 weeks now
part no: WPJ531LV 7A07P01612AR-1 (no SIM slot)
Learn More
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available. -
DR6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6. Wallys
$119.00DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports
Samples are available now! OpenWiFi and OpenWRT firmware supported.
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.
Learn More -
MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT
$139.00Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.
The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) .
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files