802.11AC / AX WiFi solution
WiFi 4 / 5 / 6 Access Points with Routing, Long range, Outdoor and Indoor solution, for 2,4GHz, 5GHz and 6GHz wireless networks.
We offer OpenWRT - Lede and Linux supported HW for your heavy loaded Wi-Fi apps and Embedded projects.
MEDIATEK MT7915 / 7916 and Qualcomm QCA QCN9074 / 9024 WIFI 6 / 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW - Pine Series WiFi Module: QCA is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN9074 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E is now available in Wallys / 524WiFi Systems! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth!
- DO YOU LIKE MEDITEK WIFI6 MODULES ? WE DEVELOPPED NEW DBDC (DUAL BAND DUAL CONCURRENT) WIFI6 MODULE FOR HEAVY LOAD APPLICATIONS BASED ON MEDIATEK MT7915-DAN CHIPSET ! PLEASE READ OUR TEST REPPORT FOR THESE MODULES.
- HOW WE MAKE QCA QCN9074 WLAN WIFI 6 / 6E MODULE DR9074 4X4 WORK ON x86 LINUX PLATFORM - PLEASE READ HERE.
-
524 WiFi 6 Mediatek MT7915 2T2R Dual Band Concurrent DBDC miniPCIe module IEEE 802.11ax 2.4G / 5GHz AW7915-NPD 2 Pro Plus MMCX
$59.90524 WiFi 6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD2 Pro+ MMCX high power card
AW7915-NPD2 with MMCX connectors for outdoor use is a WiFi6 11ax 2T2R 1800Mbps mini PCIe Module by MT7915DAN – new improved version available ! WPA3 supported in latest OpenWRT. CE and FCC certified.AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1×2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas MMCX RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.
AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.
MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.
Learn More -
524 WiFi 6E Dream 9074-6E Qualcomm PN02.7 Single band 6GHz QCN9024 / QCN9024 WIFI6E (11AX) 4X4 MU-MIMO MODULE, M.2 E key, Pro+
$78.00QCN9074 524 WIFI 6E 11AX 4X4 WIFI MODULE AVAILABLE NOW ! Pine Series WiFi Module:
Wallys + 524wifi tech is Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E. Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-6E(PN02.7) based on QCN9074 / 9024 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 6GHz Single Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide userswith mobile access to high-bandwidth video streaming, voice, and data transmission for officeand challenging RF environment in factories, warehouses establishment.
Wallys DR9074 5G and 6E modules and available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices!
WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE Pro+ MODEL PN02.7
KEY FEATURES
• Qualcomm Atheros QCN 9074 / 9024
• 6GHz, max 23dBm per chain, up to 4949Mbps
• Single Band 6GHz 4×4 WiFi 6E (802.11ax) - – Frequency Range 5.925GHz to 7.125GHz
• 4 spatial streams (4SS)
• M.2 E Key Interface
• PCI Express 3.0 Interface
Chipset Qualcomm Atheros QCN 9074 / 9024 with Pro+ Industrial grade extended temperature range and better radio signal parametersInformations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"
Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/
-
524WiFi WiFi7 9274-5G Qualcomm QCN 9274 (11be) 5GHz 4X4 MU-MIMO WIFI MODULE, M.2 E key, Waikiki
$99.00QCN9274 WIFI 7 11BE 4X4 WIFI MODULE - Waikiki WiFi Module - available for order and testing now ! lead tiem is 2-3weeks only
Features
■ Qualcomm Atheros QCN9274 for Industrial Grade;
■Maxim Tx power 20dBm per chain;
■ 4x 4 5G MU-MIMO, up to 5765Mbps physical data rate;
■ Support up to 4096-QAM;
■ M.2 connector;
■ PCI Express 3 .0 Interface
■ Latest Linux version can support Ath12k driver
DR9274-5G based on QCN9274 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment.
-
QCN 9024 524 WiFi 6E Dream 9074E Qualcomm miniPCIe Dual band 5 or 6 GHz QCN9024 (11AX) 4X4 MU-MIMO WIFI radio MODULE, ProPlus
$99.90QCN9074 or 9024 WIFI 6 / 6E 11AX 4X4 Dual Band Selectable 5GHz or 6GHz miniPCIe WIFI MODULE :
Product Description - Testing samples available now !
DR9074E based on QCN90X4 Chipset is an enterprise high power wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Features
■ Qualcomm Atheros QCN90X4
■ Maxim Tx power 20dBm per chain
■ Data Rateup to 4949Mbps
■ Support 5.180~5.825Ghz or 5.925GHz-7.125GHz or 5.180GHz- 7.125GHz
■ MiniPCIe connector
■ PCI Express 3.0 Interface
Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"
Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/
Learn More -
524 WiFi 6 Dream 9074E-DB Qualcomm miniPCIe Dual band 2,4 or 5 GHz QCN9074 / QCN6024 11AX 4X4 MU-MIMO WIFI radio MODULE, Pro+
$119.00QCN9074 / QCN6024 WIFI 6 11AX 4X4 WIFI DUAL BNAD Pro+ MODULE - selectable 2,4 ot 5GHZ:
DR9074E-DB based on QCN9074 or QCN6024 Chipset is an enterprise wireless module integrated with 4x4 or 2x2 MU-MIMO Dual Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Features
■ Qualcomm Atheros QCN9074 or QCN6024
■ Maxim Tx power 20dBm per chain
■ Support 2.412GHz-2.472GHz & 5.18GHz-5.825GHz
■ MiniPCIe connector
■ PCI Express 3.0 Interface
Applications
■ Commercial radio coverage
■ Forest fire protection engineering
■ Country coverage
■ Some special scene application
Learn More -
Wallys DR-AP6018 V4 indoor metallic enclosure for DR 6018 v4 boards, industrial AP enclosure
$49.00Wallys DR-AP6018 V4 indoor metallic enclosure for DR 6018 v4, industrial AP. 4x WIFI indoor antennas and 4x pigtal cables included in. Sell with main board togehter, no separate orders. Learn More -
QCN 9024 524 WiFi 6E Dream 9074 -Triband band Qualcomm QCN9024 2,4 / 5 / 6 GHz 11AX 4X4 MU-MIMO WIFI radio MODULE, ProPlus serie
$99.90Testing samples available now!
QCN 9024 WIFI 6 / 6E 11AX 4X4 m.2 Tri band selectable WIFI MODULE ( 2,4GHz or 5Ghzr or 6GHz triband support) :
Product Description
DR9074-Triband based on QCN9024 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO Dual Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Features
■ Qualcomm Atheros QCN9024
■ Maxim 23 dBm per chain,up to 4949Mbps
■ Data Rateup to 4949Mbps
■ Support Tri Band 2.4GHz&5GHz&6GHz 4x4 WiFi 6E (802.11ax)
■ 4 spatial streams (4SS)
■ M.2 E Key Interface
■ PCI Express 3 .0 Interface
Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"
Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/
Learn More -
QCN9274 524WiFi WiFi7 Dream 9274-6G Qualcomm Single band 6GHz 802.11BE 4X4 MU-MIMO WIFI7 MODULE, M.2 E key, ProPlus series
$128.00QCN9274 524 WIFI 7 11BE 4X4 WIFI MODULE AVAILABLE NOW FOR orders and TESTING now!
524wifi Pro+ and Wallys tech are Introducing Qualcomm’s 4x4 11be AP mode enabled radio module!DR9274-6G based on QCN9274 Chipset is an enterprise wireless module integrated with 4x4 MU-MIMO single Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
WIFI 7 802.11BE 4X4 MU-MIMO 6GHZ SINGLE BAND WIRELESS MODULE
Features
■ Qualcomm Atheros QCN9274 for Industrial Grade;
■ Maxim Tx power 22dBm per chain;
■ 4x4 6G MU-MIMO, up to 11530Mbps physical data rate;
■ Support up to 4096-QAM;
■ M.2 connector;
■ PCI Express 3 .0 Interface
■ Latest Linux version can support Ath12k driver
-
QCN9274 524WiFi WiFi7 Dream 9274-DB Qualcomm Dual band 2,4 + 5 GHz 802.11BE 2X2 MU-MIMO DBDC WIFI7 MODULE, M.2 E key, serie Proplus
$99.00QCN9274 524 WIFI 7 11BE 2X2 WIFI Dual Band Dual Concurrent MODULE
524wifi Pro+ and Wallys tech are Introducing Qualcomm Dual Band concurrent 2x2 11be AP mode enabled radio module!Dream 9274-DB based on QCN9274 Chipset is an enterprise wireless module integrated with Dual Band 2x2 MU-MIMO Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters, designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
This version is not available now, please use DR9274-5G6G for testing.
WIFI 7 802.11BE 2X2 MU-MIMO 2,4+ 5 GHZ DUAL BAND WIRELESS MODULE
Features
■Qualcomm Atheros QCN6274;
■Qualcomm Atheros QCN9274 for Industrial Grade;
■ Maxim Tx power 20dBm per chain;
■ 2×2 2.4GHz MU-MIMO, up to 1376Mbps physical data rate;
■2×2 5GHz MU-MIMO, up to 5765Mbps physical data rate;
■ Support up to 4096-QAM;
■ M.2 connector;
■ PCI Express 3 .0 Interface
-
QCN9274 524WiFi WiFi7 Dream 9274-5G6G Qualcomm Dual band 5 + 6 GHz 802.11BE 2X2 MU-MIMO DBDC WIFI7 MODULE, M.2 E key, serie ProPlus
$109.00QCN9274 524 WIFI 7 11BE 2X2 WIFI Dual Band Dual Concurrent MODULE AVAILABLE NOW FOR orders and TESTING now!
524wifi Pro+ and Wallys tech is Introducing Qualcomm Dual Band concurrent 2x2 11be AP mode enabled radio moduleDream 9274-5G6G based on QCN9274 Chipset is an enterprise wireless module integrated with Dual Band 2x2 MU-MIMO Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
WIFI 7 802.11BE 2X2 MU-MIMO 5 + 6 GHZ DUAL BAND WIRELESS MODULE with Pro+ Industrial grade extended temperature range and better radio signal parameters
Features
■Qualcomm Atheros QCN9274 for Industrial Grade;
■ Maxim Tx power 22dBm per chain;
■ 2x2 5G & 2x2 6G MU-MIMO, up to 8,647Mbps physical data rate;
■ Support up to 4096-QAM;
■ M.2 connector;
■ PCI Express 3 .0 Interface
-
524 WiFi 6 Dream 9074-5G Qualcomm PN02.1 Single band 5GHz QCN9074 / QCN9024 WIFI6 11AX 4X4 MU-MIMO WIFI MODULE, M.2 E key, Pro+
$69.90QCN9074 WIFI 6 11AX 4X4 WIFI MODULE - Pine Series WiFi Module:
Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E ! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-5G(PN02.1) based on QCN9074 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 5GHz Single Band Wireless Module with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
DR9074 5G and 6E modules are available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices!
WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE Pro+ MODEL PN02.1
KEY FEATURES
• Qualcomm Atheros QCN 9074 / 9024 Reference Design PN02.1
• 5GHz, max 23dBm per chain, up to 4949Mbps
• Single Band 5GHz 4×4 WiFi 6 (802.11ax)
• 4 spatial streams (4SS)
• M.2 E Key Interface
• PCI Express 3.0 Interface
• Supports Dynamic Frequency Selection (DFS)Chipset Qualcomm Atheros QCN 9074 / 9024
Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"
Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/
-
Turris WiFi 2.4 / 5GHz Antenna Diplexer with LTE Coexistence Filter (Dual Band)
$24.99Turris Diplexer with LTE Coexistence Filter
It combines the 2.4GHz/5GHz signals to one single dual-band antenna with or without an LTE coexistence filter. Instead of using 8x Antennas for both WiFi radio, you may now reduce the antenna to 4 by using our diplexer to connect both 2.4GHz and 5GHz radios together. LTE coexistence option is with High Rejection in LTE bands.Learn More
Specifications:- 1x1 2.4GHz/5GHz U.FL Connector
- 1x1 2.4GHz/5GHz SMA Connector, no cable sincluded in
- 2412MHz~2472MHz, 4900MHz~5950MHz
- 50 Ω for Impedance
-
WiFi 5 5N17 5GHZ 17dBi DUAL-POLARIZATION ANTENNA for 11ac wifi, 2*2 MIMO, COMPEX
$15.00
Special Price $12.00
COMPEX 5N17 5GHZ 17DBI DUAL-POLARIZATION ANTENNA element with 2*ufl
- 5.1 ~ 5.9 GHz
- 17 dBi Dual-Polarization
- 2x U.FL
- -40dB Isolation
- Antenna element + metal plate, also available in Weatherproof Enclosure (MJE-5N17 - optional)
-
mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, USB 3.0 port, Rooter and OpenWRT firmware supported
$69.90Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included
Max. LAN Data Rate: 867Mbps
Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n
Wi-Fi Supported Frequency: 2.4G & 5G
Wi-Fi Transmission Standard: 802.11ac
Wired Transfer Rate: 10/100/1000Mbps
2.4G Wi-Fi Transmission Rate: 300 Mbps
Encryption Type: WPA-PSK
Function: FireWall, QoS, VPN
LANPorts:4 WAN Ports:1
USB 3.0 port: 1 included
Certification: FCC CE
5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)
Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !
Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)
Learn More -
ZBT WE1026-5.8G Vehicle Wireless 4G LTE Router , dual ban WiFi 2,4 + 5GHz, can support Quectel miniCPIe LTE-A modules
$59.99WE1026 is a dual band 3G/4G Wi-Fi router (3G / 4G gateway) specially for Vehicles using. LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06. It has1 LAN port, support 802.11 a/b/g/n/ac and 3G/4G. This device has Wide Area Network VPN tunnel, Local Area Network Wi-Fi security authentication, 4G/3G and watchdog functions etc, to achieve wireless LAN seamless connection, automatic network redial to provide users with high-speed, secure, reliable mobile broadband services.It has a USB 2.0 data interface, a MICRO SD (TF) card interface, with larger storage function.
This device with metal case and vehicle anti-interference design, to achieve excellent anti-interference performance. Also it uses vehicle power supply design, support 9V~28V Car power supply,can effectively prevent equipment damage from vehicle’s power fluctuations, it offers a wonderful solution for vehicle Wi-Fi such as bus Wi-Fi,car Wi-Fi, train Wi-Fi, taxi Wi-Fi etc. This device also widely used in Wi-Fi coverage project like Bus station, the Airport, Sea port etc. At the same time, it is also widely used in scenic where Wi-Fi coverage and other public places where Wi-Fi coverage of the Internet.
- Special for Vehicles using;
- Complies with 802.11b/g/n/a/ac. wireless protocol;
- Support dual band 2.4G and 5G wifi signal + support 3G/4G at the same time;
- LTE 4G module is not included it - please order LTE 4G module based on yoru need. It can support Quectel LTE cat4 and cat 6 4G modules like EC25 and EP06.
- Support 4G / 3G watchdog function, automatic network redial.
- Can be dialed through an external USB interface (need to mount USB 3G/4G Dongle )
- Support GPS function (depending on 3G/4G module)
- Support to automotive power 12V and 24V systems, the minimum operating voltage is 9V, the maximum operating voltage is 36V. The maximum can be withstand 174V duration 150ms surge voltage, meet to 5a, 5b standard of the car protection.
-
ZBT WE1326 LTE router 4G 2.4GHz 5GHz 802.11b/g/n/ac MT7621 1SIM 1SDcard 1USB 4x5dBi antenna GoldenOrb Rooter OpenWRT
$49.00- Max. LAN Data Rate:1000Mbps
- With Modem Function: YES - but you need to buy LTE module separately compatible for yoru region. Quectel EC25, EP06, EM06, EM12, EM16 and more supported.
Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n- Wi-Fi Supported Frequency: 2.4G & 5G
- Wi-Fi Transmission Standard: 802.11ac
- Wired Transfer Rate: 10/100/1000Mbps
- 2.4G Wi-Fi Transmission Rate: 300 Mbps
- Encryption Type: WPA2-PSK
- Products Status: New
- Type: Wireless
- LAN Ports: 4
- WAN Ports: 1
- Certification: CE,ROHS,FCC
- Main Chip: MT7621+MT7612+MT7603
- Flash/RAM: 16M Flash+512M RAM
- Wireless standard: 802.11b/g/n/ac
- Interface: 4 LAN(10/100/1000M) /1 WAN
- Wireless speed: Up to 1200Mbps
- Maximum power: 12W
- other Interface: 1 SIM 1 SD 1 USB port
- Frequency Range:2.4 GHz and 5.8 GHz
- Antenna: removable 4*5dBi antenna
-
Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV versions boards)
$19.90Wallys PD-25 802.3 af / at active POE to Passive POE 24V adapter (for LV version boards to work with 802.3af/at poe)
Features:
Support 802.3AT/AT
The output voltage is 24V
The efficiency is 85%
Support surge protection
Support RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description : PD-25 is a 802.3at module,that also support 802.3af standard.And it can work in complex environment. It delivers 24V for devices that support Passive POE only.
-
QCA 9531 WPJ531LV-A Dual Radio Embedded Board, 16/64MB, on board 2.4GHz radio, 11n/11ac ready
$75.00CompexWPJ531LV-A Dual Radio Embedded Board gen3 - available again, but MOQ is 50pcs - lead time is 2-3 weeks now
part no: WPJ531LV 7A07P01612AR-1 (no SIM slot)
Learn More
WPJ531 is a powerful and robust wireless embedded board based on the Atheros AR9531 CPU.It features a 650MHz network processor and integrates a 2.4G 2x2 internal on-board radio and 1 miniPCIe slot that supports 802.11ac/abgn radio. Embedded with 64MB memory and 16MB Flash, WPJ531 provides the ideal platform for any applications. WPJ531 includes an integrated Power over Ethernet (PoE) that allows WPJ531 to be used in areas where power outlets are not readily available. -
Dream 6102-5G 524WiFi WiFi6 802.11ax 2x2 MU-MIMO 5GHz QCN 6102 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$22.00DR6102-5G WiFi 6 802.11ax 2x2 MU-MIMO 5 GHz QCN 6102 Single Band Wireless Module
Works only with DR518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6102 5GHz, max 23dBm per chain, up to 2402Mbps Single Band 5 GHz 2x2 WiFi 6E 802.11ax 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6102-5G based on QCN6102 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 5GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More -
SALE - WPJ428 Multi-function IPQ4028 Embedded Board, 710MHz CPU / 2x GE Port / Dual Band 802.11ac Wave 2, LTE Gateway
$99.90WPJ428HV - 2.4GHz & 5GHz 2×2 802.11ac Wave 2 MU-MIMO Wireless Embedded Board with M.2 Slot
- Next Gen IPQ4028 ARM v7 CPU, 710MHz CPU
- On-board Dual Band 2×2 802.11ac Wave 2 300Mbps @ 802.11n + 867Mbps @ 802.11ac
- 802.11ac Wave 2
- Integrated IEEE 802.3af/at
- Support 2 x Gigabit Ethernet Port
- 1x NGFF (M.2) Slot
- 802.11ac Wave 2 LTE Gateway - WPJ428 board only provide M2 slot for 3G/4G module, LTE supported frequencies/channels and LTE supported antenna are determined by the 3G/4G module.
- samples available ! for compatible LTE modules check our LTE modules category !
- Can support Quectel EM12-G 4G LTE module now !!! Same as EC25, EP06 or EM7455 modules
-
Wallys QCA DR 6018 v4 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm - Atheros IPQ6018, WiFi 6, CP01
$115.00Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi 2.5Gbps GE Port / Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA
Samples are available, higher quantity manufactured upon request with quick lead time. OpenWiFi and OpenWRT supported !
CP01 - c4 - 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
- Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
- 1GB (2x 512MB), DDR3L 16-bit interface with 32-bit memory bus design
- 256MB NAND Flash
- 32MB NOR Flash
- M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
- 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
- 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
- 1x 2.5Gbps Ethernet port
- 5x 1Gbps Ethernet ports
- 1x USB 2.0 Port
APPLICATIONS
QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!
• 802.11ax MU-MIMO OFDMA Access Point • Mesh router supporting EasyMesh • Smart AP TWT • Can support OpenWIFI firmware
This board is QCA reference design derived from CP01 and is running QCA reference firmware, This board is for Developpers to developp SW. The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware - not to make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc
-
DR6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6. Wallys
$119.00DR6018-S LV - Multi-function IPQ6010 ( IPQ6018 family ) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports
Samples are available now! OpenWiFi and OpenWRT firmware supported.
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.
Learn More -
DR 6018-S 802.11AX MU-MIMO OFDMA DUAL CONCURENT BAND Multifunction EMBEDDED BOARD, Qualcomm IPQ 6010, WiFi 6
$149.99DR6018-S HV - Multi-function IPQ6010 (IPQ6018 family) Embedded Board with on-board WiFi Dual Band Dual Concurrent / 802.11ax MU-MIMO OFDMA / 2* GE Ports with Active POE 802.3bt Support
Samples are available now! OpenWRT firmware and OpenWiFi supported
11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD
Features
Quad-core ARM 64bit A53@1.8GHz Processor 1GB DDRL3L System Memory 8MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate
Support: QCN9074 WiFi 6E Card in M.2 slot
Product Description
DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Active POE 802.3bt supported, DC jack 24-48V. If you need passive POE support , then please order DR6018-S LV version.
Learn More -
DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi
$89.00IPQ 4019 / 4029 Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board
- Featuring with industrial-grade IPQ4019/IPQ4029 chipset
- Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module
- Support 4.940GHz to 5.825GHz Frequency Range
- Support 2.400GHz to 2.482GHz
- Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
- Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
- Support 11ABGN/AC
- RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
- FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
- Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
- USB 3.0 support ! miniPCIe LTE-A module supprted !
-
Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!
-
MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT
$139.00Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.
The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) .
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
Dream 5018 S 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys
$89.00DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot
Samples are available now!
11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support
Features:
Dual-core ARM 64bit A53@1.0GHz Processor
512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash
2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate
Support BT5.1
M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;
M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot
POE 802.3 bt,at,af support
Support Openwifi
Product Description
DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment
Learn More -
Dream 5018 M 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys
$89.00Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot
Samples are available now!
11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support
Dual-core ARM 64bit A53@1.0GHz Processor
1G DDRL3L System Memory
8MB NOR Flash, 256MB NAND Flash
2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate
M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;
M.2 Card Slot for QCN9074 WIFI 6E Card
M.2 Card Slot for QCN6122-6E Card
M.2 Card Slot for QCN6102-5GCard
Support Openwifi
DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card.
Learn More -
Dream 6122-6E 524WiFi WiFi6E 802.11ax 2x2 MU-MIMO 6GHz QCN 6122 Single Band Wireless Module M.2, FOR IPQ 5018 boards only !!
$29.00Dream 6122-6E WiFi 6E 802.11ax 2x2 MU-MIMO 6 GHz QCN 6122 Single Band Wireless Module
Works only with IPQ Dream 518 boards, can not be ordered separately.
Features - Qualcomm Atheros QCN6122 6GHz, max 23dBm per chain, up to 2402Mbps Single Band 6GHz 2x2 WiFi 6E (802.11ax) 2 spatial streams (2SS) M.2 E Key Interface PCI Express 3.0 Interface
Product Description: DR6122-6E based on QCN6122 Chipset is an enterprise wireless module integrated with 2x2 MU-MIMO 6GHz Single Band Wireless Module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Learn More
-
Wallys 2G41 Linux PCIe adapter for miniPCIe and M.2 WiFi modules, 4*miniPCIE slot to PCIe adapter
$79.90Features
Support 4pcs Mini PCIE cards or 4 pcs M.2 cards , can support DR9074 QCN 9074 / 9072 modules
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Product Description
4G41 is an adapter card with four MiniPCIe and four M.2 slots. It can be used in a PC with a PCIe slot. Use this new adapter to expand your connectivity and upgrade your device to use the latest miniPCIe and m.2 interface cards. Comes with regular profile bracket.
Bracket include holes for mounting SMA connectors, or for using as cable exist holes.
Available for orders
Learn More -
COMPEX QCA9890 WLE900VX - i 7BA Industrial-grade 3*3 802.11ac Dual band Radio miniPCIe module
$56.00Industrial-grade 802.11ac 3*3 Dual band Radio - WLE900VX-i temp 7BA , COMPEX Networks
Available now in stock!
The WLE900VX-itemp is an industrial-grade IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9890 chipset, the Operating temperature range is -40 C----75 C,the WLE900VX-itemp dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX-itemp sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, The WLE900VX-itemp is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.
DUAL BAND 3×3 802.11AC INDUSTRIAL GRADE MODULE
- • Qualcomm-Atheros QCA9890, XB140 Reference Design
- • 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
- • IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
- • Operating temperature range:-40 C to 75 C
- • 3X3 MIMO Technology & up to 1.3Gbps
- • MiniPCI Express 1.1 interface
LINUX users : customer was required to update their kernel by edited /drivers/net/wireless/ath/regd.c with change the following "reg->country_code = CTRY_UNITED_STATES;" to their country accordingly since this is an initial limitations of the card from Linux operating system itself.We are using Ubuntu 16.04 with 4.15.0-29 kernel and Firmware ver 10.2.4.70.9-2 for WLE900VX module
Learn More