Search results for 'industrial'
-
5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE
From: $155.50
To: $2,715.46
Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform).
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html
New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case
$129.00Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware) - this version is EOL, please use version 7 now !
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 4 x WiFi Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
EM12-G EM12GPA-512-SGAD Quectel LTE-A M.2 - optimized LTE advanced 3 x CA Cat 12 Module ( global ), 5G+ ready
$89.00
Special Price $79.99
Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. De-signed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future Cat 16 module EM16, which will facilitate customers to migrate between different categories. SDX20 chipset
Special price now - new, not used modules, original packing !
Key Benefits
● LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
Learn More
● Support DL 3x carrier aggregation and 256QAM
● Worldwide LTE-A and UMTS/HSPA+ coverage
● Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
● Feature refinements: supports DFOTA and VoLTE
● MIMO technology meets demands for data rate and link reliability in modem wireless communication systems -
MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT
$139.00Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.
The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) .
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
Quectel EC25 miniPCIe - optimized LTE Cat 4 Module EC25-E EUROPE EMEA version
$42.00
Special Price $39.00
EC25-E FA PCIE - LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41
WCDMA: B1/B5/B8
GSM: B3/B8LTE Version 3GPP E-UTRA Release 11
Quectel EC25 is a series of LTE category 4 module optimized
Learn More
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage. -
Quectel EC25 miniPCIe - optimized LTE Cat 4 Module ver EC25-A North America
$51.99EOL - please use newer EC25-AF version
EC25-A: LTE FDD: B2/B4/B12 WCDMA: B2/B4/B5
LTE Version 3GPP E-UTRA
Release 11 Bandwidth: 1.4/3/5/10/15/20MHz
Typ. 3GPP TS27.007 and Enhanced AT Commands
Quectel EC25 is a series of LTE category 4 module optimized
Learn More
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage. -
Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-A (America), LTE-A ready
$59.90Variant for America : EP06-A
LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.
LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
B29/B30/B66
LTE TDD: B41
2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
B4+B4/B5/B12/B13/B17/B26/B29;
B25+B5/B12/B13/B17/B25/B26/B29;
B30+B5/B12/B17/B26/B29; B41+B41
(Note: B29 is only for secondary
component carrier)
WCDMA: B2/B4/B5Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systemsNotice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.
Learn More -
Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-E version for EU, AU, BR , LTE-A (5G GSM) ready
$59.90 As low as: $54.00Variant for EMEA/Australia/Brazil : EP06-ELA-512-SGA
LTE-A ready !! EP06-E PCIE has stop production as old version. But we still have 350pcs EP06-E PCIE in stock now !!
LTE FDD: B1/B3/B5/B7/B8/B20/B28
LTE TDD: B38/B40/B41
2×CA: B1+B1/B5/B8/B20/B28;
B3+B3/B5/B7/B8/B20/B28;
B7+B5/B7/B8/B20/B28;
B38+B38; B40+B40; B41+B41
WCDMA: B1/B3/B5/B8Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)LTE-A Cat.6 module with Mini PCIe form factor, optimized for
Learn More
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems -
SIGNAL SLM630B (MeiG) miniPCIe TD-LTE/FDD-LTE/TD-SCDMA/WCDMA/GSM Module, ufl connectors
$19.99SLM630 is a multi-mode LTE wireless module, via the general industrial standard interface, supports voice, SMS, data and GPS. Ultra low power consumption and extended temperature range, it can be designed in many kinds of applications, such as data card, video monitor, tablet,vehicle equipment. SLM630 is a mobile broadband access module, access rate can support:
·LTE:TD-LTE(61Mbps/18Mbps) ·LTE:FDD-LTE(100Mbps/50Mbps) ·3G:TD-SCDMA up to support TD-HSPA(4.2Mbps/2.2Mbps) ·3G:WCDMA up to support DC-HSPA+(42Mbps/5.76Mbps) ·2G:GSM up to support EDGE(236.8kbps/236.8kbps)
Can work well with Wodaplug LTE routers and SDK firmware ! Very cheap LTE 4G module with good performance for Europe !!
Learn More -
Wodaplug M.2 (NGFF) to USB 2.0 Computer Adapter with SIM Card Slot for WWAN/LTE/4G Module
$14.99- Designed for desktop/Laptop PCs that convert wireless M.2 Card to USB 2.0 port. Ideal for LTE 4G modules.
- You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
- Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, HUAWEI , Sierra Wireless , quectel
- Support 30*42 type NGFF(M.2) Key B card
- Support SIM 6pin/8pin card connector.
-
- Attention - can not support WiFi modules !
-
Wodaplug Mini PCI-E to USB Adapter with SIM Card Slot for WWAN/LTE modules for 3G / 4G Network Cards
$14.99Wodaplug USB adapter for miniPCIE 5G 4G LTE modules incl SIM bay
Supports USB bus interface of Mini-Cards such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, 5G and Mini-Card to desktop PC
Easy installation & no driver required, but make sure you have installed the software drivers for your WWAN card.
Support SIM 6pin/8pin card connector.
No additional power required
Supports Plug & Play and Hot-Swapping
Attention - can not support WiFi modules !
Learn More -
Wodaplug outdoor 16 port splitter FTTH PON BOX WDP02016B for mini PLC splitters
$29.90Wall / pole / ground mountable - ultra slim compact design
Double or single door access
Keyway entry
Splice and termination
Up to 16 ports ( PLC ) 1 - 2 inputs
Standard beige color
Locker feautured
Valdal proof
Special price if ordered in set with wodaplug GEPON active equipment systems ONU’s and OLT’s
The sealing performance meets the IP65-level requirements
Box body is made of special PV materials, it looks nice in shape and its operation is convenient, anti-ageing and long lasting
It is the combination of three functions: optical fusion, store and distribution
Adapter is fast installable, maintenance is easy, transmission loss is lowWDPBOX is specially designed, and optimized for GEPON or other PON networks design fiber optical distribution, termination and splice box. You get all in one solution for PON from Wodaplug.
Learn More -
Wodaplug outdoor 8 port splitter FTTH PON BOX WDP0208B for mini PLC splitters
$16.50Wodaplug FTTH Outdoor PON BOX WDP0208B with 8 ports designed for mini package PLC splitters 1/8 or 2*1/4
Wall / pole / ground mountable - ultra slim compact design
Double or single door access
Keyway entry
Splice and termination
Up to 8 ports ( PLC ) 1 - 2 inputs
Standard beige color
Locker feautured
Valdal proof
Special price if ordered in set with wodaplug GEPON active equipment systems ONU’s and OLT’s
The sealing performance meets the IP65-level requirements
Box body is made of special PV materials, it looks nice in shape and its operation is convenient, anti-ageing and long lasting
It is the combination of three functions: optical fusion, store and distribution
Adapter is fast installable, maintenance is easy, transmission loss is lowWDPBOX is specially designed, and optimized for GEPON or other PON networks design fiber optical distribution, termination and splice box. You get all in one solution for PON from Wodaplug.
Learn More -
Wodaplug Whip12 outdoor 5G 4G LTE Antenna 700 / 800 / 900 / 1800 / 2100 / 2600 Mhz 12dB SMA LTE male Connector
$24.99- Version 2021 : Gain Improvement. OmniDirectional Antenna 4G 5G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz
- 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for outdoor LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
- Gain 7-10dbi, SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
- Dimensions (cm) : 2000mm, water and wind resistant, Operates between -40° and +60° c
- Specialy tuned for LTE 4G 5G frequencies
- Cable lenght 2m (customisable 3m o 5m or 10m max)
- GE0006AA
-
Wodaplug ® LTE router Multi-function QCA9531,E micro Board mini router metal case, 2x LAN /3G/UMTS/4G/5G/LTE gateway, PPPOE, dhcp-4G, M2M, miniPCIe, H5312
$49.00This device is EOL - last two units in stock !! Please use WG1608 routers instead.Complete LTE plug & play complete solution, ready for Quectel EM12-G, EM06 / EP06 / EC 25 - XXX lte module, lte module not included in (pleas epurchase based on your region), supported in Openwrt or SDK compil.M2M module & miniPCIe slots for 4G LTE modules, WiFi radio on board - for setup guide either SDK or OpenWRT/LEDE download rar fileEC25-V Verizon module tested supported with LEDE firmwarenew Lede / OpenWRT software support more function than SDK:support IPv6support one LTE module in miniPCIe or M.2 slotsupport VPN functionsupport control band width and use Qos !we use Qualocmm AP147 as reference designsupport wide range volt from 9v~40V poe or power plugSupport hardware and software WDTSIM/UIM port: 15KV ESD protection;Support low-consumption mode, including sleep mode, scheduled online/offline mode,scheduled power-on/power-off mode(optional)Support standard WAN port and PPPOE protocol that can connect to ADSL directlyConvenient configuration and maintenancesupport firmware update locally or remotely (LAN, WiFi and OTA WAN) Learn More