EC25-E FA PCIE - LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41
WCDMA: B1/B5/B8
GSM: B3/B8

LTE Version 3GPP E-UTRA Release 11

Quectel EC25 is a series of LTE category 4 module optimized
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage.

Wodaplug.com WDS mini / micro optical Bare fiber PLC splitter 1 to 4 with default connector type SC / PC - mini packge with steel tube

   PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume (micro size but same or better technical values), the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.

WDS mini / micro optical Bare fiber PLC splitter 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,small plastic housing Splitters 100% compatible with all optical GE PON wodaplug networking products

Wodaplug.com WDS mini / micro optical Bare fiber PLC splitter 1 to 4 with default connector type SC / PC - mini packge with steel tube

   PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume (micro size but same or better technical values), the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.

WDS mini / micro optical Bare fiber PLC splitter 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,small plastic housing Splitters 100% compatible with all optical GE PON wodaplug networking products

Wodaplug FTTH Outdoor PON BOX WDP0208B with 8 ports designed for mini package PLC splitters 1/8 or 2*1/4 

Wall / pole / ground mountable - ultra slim compact design
Double or single door access
Keyway entry
Splice and termination
Up to 8 ports ( PLC ) 1 - 2 inputs
Standard beige color
Locker feautured
Valdal proof
Special price if ordered in set with wodaplug GEPON active equipment systems ONU’s and OLT’s
The sealing performance meets the IP65-level requirements
Box body is made of special PV materials, it looks nice in shape and its operation is convenient, anti-ageing and long lasting
It is the combination of three functions: optical fusion, store and distribution
Adapter is fast installable, maintenance is easy, transmission loss is low

WDPBOX is specially designed, and optimized for GEPON or other PON networks design fiber optical distribution, termination and splice box. You get all in one solution for PON from Wodaplug.

Wall / pole / ground mountable - ultra slim compact design
Double or single door access
Keyway entry
Splice and termination
Up to 16 ports ( PLC ) 1 - 2 inputs
Standard beige color
Locker feautured
Valdal proof
Special price if ordered in set with wodaplug GEPON active equipment systems ONU’s and OLT’s
The sealing performance meets the IP65-level requirements
Box body is made of special PV materials, it looks nice in shape and its operation is convenient, anti-ageing and long lasting
It is the combination of three functions: optical fusion, store and distribution
Adapter is fast installable, maintenance is easy, transmission loss is low

WDPBOX is specially designed, and optimized for GEPON or other PON networks design fiber optical distribution, termination and splice box. You get all in one solution for PON from Wodaplug.

Providing simultaneous measurement at EPON/GPON/GEPON for all three wavelengths on the fiber (1490nm,1550nm,1310nm )
Used in Burst mode measurement of 1310nm upstream
Convenience for threshold setting, which can set the threshold on the tester
USB communication port enables data transfer to a PC
Offers up to 10 different threshold sets in total
User self-calibration can be retrieved in computer through the software.
10 minutes Auto-off function can be activated or deactivated with keypad operation.

Wodaplug.com WDS mini / micro optical Bare fiber PLC splitter 1 to 16 with default connector type SC / PC - mini packge with steel tube

   PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume (micro size but same or better technical values), the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.

WDS mini / micro optical Bare fiber PLC splitter 1/2-1/64. Our splitters are equiped with default connector type: SC/PC !!!! PLC Splitter,SC/PC,small plastic housing Splitters 100% compatible with all optical GE PON wodaplug networking products

 EOL - please use newer EC25-AF version 

EC25-A: LTE FDD: B2/B4/B12 WCDMA: B2/B4/B5

LTE Version 3GPP E-UTRA

Release 11 Bandwidth: 1.4/3/5/10/15/20MHz

 Typ. 3GPP TS27.007 and Enhanced AT Commands

Quectel EC25 is a series of LTE category 4 module optimized
specially for M2M and IoT applications. Adopting the 3GPP
Rel. 11 LTE technology, it delivers 150Mbit/s downlink and
50Mbit/s uplink data rates. Designed in the compact and unified
form factor, EC25 is compatible with Quectel UMTS/
HSPA+ UC20 module and multi-mode LTE EC20/EC21 module,
which allows for flexible migration among them in design
and manufacturing.
EC25 contains 6 variants: EC25-V, EC25-J, EC25-A, EC25-
AU, EC25-AUT and EC25-E. This makes it backwardcompatible
with existing EDGE and GSM/GPRS networks,
ensuring that it can be connected even in remote areas devoid
of 4G or 3G coverage.
EC25 supports Qualcomm® IZat™ location technology Gen8C
Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated
GNSS greatly simplifies product design, and provides
quicker, more accurate and more dependable positioning.
A rich set of Internet protocols, industry-standard interfaces
and abundant functionalities (USB drivers for Windows XP,
Windows Vista, Windows 7, Windows 8/8.1, Windows 10,
Linux, Android/eCall*) extend the applicability of the module to
a wide range of M2M and IoT applications such as industrial
router, industrial PDA, rugged tablet PC, video surveillance,
and digital signage.

Variant for EMEA/Australia/Brazil : EP06-ELA-512-SGA

LTE-A ready !! EP06-E PCIE has stop production as old version. But we still have 350pcs EP06-E PCIE in stock now !!

LTE FDD: B1/B3/B5/B7/B8/B20/B28
LTE TDD: B38/B40/B41
2×CA: B1+B1/B5/B8/B20/B28;
B3+B3/B5/B7/B8/B20/B28;
B7+B5/B7/B8/B20/B28;
B38+B38; B40+B40; B41+B41
WCDMA: B1/B3/B5/B8

Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)

LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems

Variant for America : EP06-A

LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.

LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
B29/B30/B66
LTE TDD: B41
2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
B4+B4/B5/B12/B13/B17/B26/B29;
B25+B5/B12/B13/B17/B25/B26/B29;
B30+B5/B12/B17/B26/B29; B41+B41
(Note: B29 is only for secondary
component carrier)
WCDMA: B2/B4/B5

Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)

LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems

Notice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem  support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.

Wodaplug EOC Indoor Slave with WiFi router with wifi speed 300Mbps - EOC1121R4WL-R410, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

Description

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Two WiFi antennas -  802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.

Product name ： Wodaplug.com micro power backup, UPS unit for router, powerbank for router , 2 x 12v, 1 x 5V USB UPS 8800mA WDPUPS1031-5V+12V+12V   BSU 

Global description

Never again reseting routers, loosing ADSL or wi-fi connection during micro power failures !! WDPUPS1031 can back-up up to 3 units in real time to make sure of ongoing power supply in real time. Router back up unit is designed to stand up to 24 hours * without external power with its unbelievable capacity 8800mA made from high quality brand 18650 Seiko batteries.

WDPUPS1031 for router backup is also made to be modular and users are able to replace old batteries when necessary. It is easy mountable to our micro LTE router but it can stand alone as well to power-up your ADSL router, Router, Wi-Fi or another 12V or 5V using unit.

RB4011iGS+5HacQ2HnD-IN is Powerful 10 x Gigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ 10Gbps cage, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop case supporting Mikrotik RouterOS system + Multi - WAN, Load balancing inputs