Max. LAN Data Rate:1000Mbps

With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA2-PSK

Products Status: New

Type: Wireless

LAN Ports: 4

WAN Ports: 1

Certification: CE,ROHS,FCC

Main Chip: MT7621+MT7612+MT7603

Flash/RAM: 16M Flash+512M RAM

Wireless standard: 802.11b/g/n/ac

Interface: 4 LAN(10/100/1000M) /1 WAN

Wireless speed: Up to 1200Mbps

Maximum power: 12W

other Interface: 1 SIM 1 SD 1 USB port

Frequency Range:2.4 GHz and 5.8 GHz

Antenna: removable 4*5dBi antenna

Wodaplug EOC Indoor Slave with WiFi router with wifi speed 300Mbps - EOC1121R4WL-R410, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...

Description

Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.

Two WiFi antennas -  802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.

Wodaplug EOC Indoor Slave with Gigabit Ethernet port - EOC1121L-S, 700Mbps, 1*GE LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...
Special version - since there is no slave chipset with Gigabit port, we used EOC master chip and modify firmware to work as Slave. This is because of many customers requested Gigabit port for for example repeater application.
Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable. You need one master device and you can connect several Slave devices via coax cable network and create smart Ethernet network in yoru building.

WLE600VX - 7C Industrial Grade (85°C) Dual Band 2×2 802.11ac miniPCIe Module

Availability confirmed for end Sept 2022 now! Pre-orders are required.

Qualcomm Atheros QCA9892 - Industrial Grade Chipset

• 2.4GHz max 21dBm & 5GHz max 18dBm output power (per chain)

• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n

• 2x2 MIMO Technology, up to 867Mbps

• Mini PCI Express edge connector

• Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check (LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)

• Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards • Supports Dynamic Frequency Selection (DFS)

• Cards are individually calibrated for Quality Assurance

• Supports 4.9GHz operation

Certification :
CE (!) 0678, FCC, IC Canada (7849A‐WLE600VX) , TELEC certified (Japan -reg.no.JU000537H - R 206-00537)

WiFi6 2T2R Dual Bands Dual Concurrent mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NPD

AW7915-NPD is 2 RF outputs for 2.4GHz, the other 2 RF outputs for 5GHz, and we combine 1x2.4GHz and 1x5GHz to be 1 antenna outputs and dual bands. So there are 2 antennas RF outputs with dual bands. In Linux “ifconfig” command, you can see two radios, ra0 and rai0, means you can have two radios in the meantime and dual bands dual concurrents with HW AP mode that can serve for 100+ concurrent clients connected at same time.

AW7915-NPD is a WiFi6 Mini PCIe Module 2T2R based on Mediatek MT7915DAN which is a WiFi Mini PCIe single chip which supports 1800 (573+1201) Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915DAN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915DAN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915DAN.

WiFi6 4T4R Dual Bands Selectable mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NP1

New samples available now - final version ready!

AW7915-NP1 is a 4T4R 2401 Mbps WiFi6 11ax Mini PCIe Module by MT7915 AN chip, Dual Bands selectable is configurable. Can  not be Dual Band dual conncurrent, for DBDC application please use NPD version.

AW7915-NP1 is a WiFi6 Mini PCIe Module 4T4R based on Mediatek MT7915AN which is a WiFi Mini PCIe single chip which supports 2401 Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915AN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915AN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915AN.

MULTIFUNCTION QCA IPQ4029 WALLYS DR-AP4029 INDOOR WIFI 5 ACCESS POINT, 802.11AC 2X2 MU-MIMO, DUAL BAND, 2,4 + 5GHZ OMNI antennas 4 / 6dBi

Description

DR-AP4029 is a 2x2 MU-MIMO 2.4G&5G high power Radio AP Router which including 1x DR4029 ( IPQ4029 ) Board; 2+2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.

Onmi Antenna 

■  2 x 2.4G&5G Antenna

■  PCB Antenna

■  2.4G: 4dbi ;5G: 6dbi

Enclosure

■  Dimension: 220x 220 x 42.54mm

■  UV Protected and Durable ABS Radome

■ Our Firmware supports all the modules of Quectel

Support Openwifi

Support QSDK

Support Openwrt

Turris Diplexer with LTE Coexistence Filter

WPEQ-276AX

MU-MIMO WiFi 6/6E module for the 6GHz band, Mini PCIe Module, Qualcomm Atheros QCN9072, 2T2R

WPEQ-256ACN - can work as replacement of wle 600vx modules - identical chipset, identical driver

802.11ac/a/b/g/n Mini PCIe Module (WiFi 5), Qualcomm QCA9882-BR4A 2T2R

• Chipset: Realtek RTL8822CE
• Antenna: 2 x IPEX MHF4 connectors, 2T2R
• Interface: PCIe: WLAN; USB: Bluetooth
• Output Power up to 18dBm
• Support: Windows 10, Linux, Android
available for orders lead time is 2-3weeks

QCA 9880 WLE900VX - 7A 802.11ac 3x3 MIMO miniPCIe module - available again now - or you can also use 524wifi900vx Pro+ or Sparklan modules with identical chipset

802.11ac 2.4/5GHz miniPCIe Radio Solution

The WLE900VX is an IEEE 802.11ac wireless adapter that operates in 2.4GHz and 5.0 GHz bands, available in PCIe mini card form factor. Featuring QCA9880 chipset, the WLE900VX dramatically increases the overall throughput up to 1.3Gbps with 3 x 3 MIMO technique. Leveraging the revolutionary 11ac technology, WLE900VX sets a new benchmark in throughput and range, making it ideal for consumer and enterprise applications, such as video, voice and data transmission. The WLE900VX is backward compatible with 802.11a/b/g/n and fully supports industry standards compliant security.

Dual Band 3×3 MIMO 802.11ac Wave 1 Module

• Qualcomm-Atheros QCA9880
• XB140 Reference Design
• 2.4GHz maximum 21dBm output power & 5GHz maximum 20dBm output power (per chain)
• IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
• 3X3 MIMO Technology & up to 1.3Gbps
• MiniPCI Express 1.1 interface

Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

Max. LAN Data Rate: 867Mbps

Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

Wi-Fi Supported Frequency: 2.4G & 5G

Wi-Fi Transmission Standard: 802.11ac

Wired Transfer Rate: 10/100/1000Mbps

2.4G Wi-Fi Transmission Rate: 300 Mbps

Encryption Type: WPA-PSK

Function: FireWall, QoS, VPN

LANPorts:4 WAN Ports:1

Certification: FCC CE

5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

Since the USB chip out of stock during long period, so the factory produced a batch of WG1608 routers without USB port.

Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. De-signed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future Cat 16 module EM16, which will facilitate customers to migrate between different categories. SDX20 chipset

Special price now - new, not used modules, original packing !

Key Benefits

●  LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
●  Support DL 3x carrier aggregation and 256QAM
●  Worldwide LTE-A and UMTS/HSPA+ coverage
●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
●  Feature refinements: supports DFOTA and VoLTE
●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems