Currency:

Search results for 'Quectel'

Name
Set Descending Direction

Grid List

30 per page

Items 1 to 30 of 70 total

Page:
  1. 1
  2. 2
  3. 3
  1. 4G LTE router ZBT WG3526 MT7621 880MHZ 1200Mbps 5x1GB 1xUSB 3.0 1×SIM 1×SD 1× SATA 3.0 IEEE802.11AC/N/G/B/A SDK 4.2

    $59.00

    WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB
    3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card ,1× SATA 3.0 and so on

    Wireless:
    Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be
    1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger.
    Software:
    Preload the OpenWRT.
    Original SDK based on the Linux platform SDK 4.2, including 80.211ac, IPv6, and Win8
    certification, providing VPN software, audio and touchscreen driver supports. L7 QoS can
    cooperate with the internal hardware acceleratos HNAT/HQoS perfectly, providing Auto QoS for
    Internet router and SMB router.

    With Modem Function: YES  - but you need to buy LTE module separately compatible for yoru region. Quectel  EC25, EP06, EM06, EM12, EM16 and more supported.

    Learn More
  2. 524 LTE pure 5G 4x4 MIMO OMNI Outdoor Antenna 617 - 6000 MHz 4dBi 4G/5G 4xSMA LTE male Connector, global

    $55.00

    Pure 5G Outdoor Omni MIMO Antenna for 4G/5G 617-6000MHz


    Model: 524LTE-TOF-0660-4DV-1

    Electrical Specifications
    Frequency-MHz 617-960/1710-3800/4900-6000
    Gain-dBi 2.5 / 3.5 / 4
    VSWR <2.5
    Polarization Vertical
    Horizontal Beam Width 360°
    Vertical Beam Width 60°
    Impedance 50 ohms
    Max. Input Power 50W
    Lightning Protection DC Ground

    Mechanical Specifications
    Connector 4×SMA male
    Cable 1 meter RG405
    Dimension Ø132*220 mm
    Weight 1.2 kg
    Mounting Mast Ø30-Ø50 mm
    Radome Material UV PVC
    Rate Wind Velocity 210km/h
    Operating Temperature -40°C - +65°C

    Learn More
  3. 524 WiFi 6 Dream 9074-5G Qualcomm PN02.1 Single band 5GHz QCN9074 / QCN9024 WIFI6 11AX 4X4 MU-MIMO WIFI MODULE, M.2 E key, Pro+

    $69.90

    QCN9074 WIFI 6 11AX 4X4 WIFI MODULE - Pine Series WiFi Module:

    Introducing Qualcomm’s 4x4 11ax AP mode enabled radio module! Based on Pine series QCN 9074 / 9024 chipset, radio modules supporting 2.4GHz, 5GHz as well as the lately approved WiFi 6E ! Hop on the newly approved spectrum, increase the number of channels your clients can hop on, at 160MHz bandwidth! DR9074-5G(PN02.1) based on QCN9074 Chipset is an enterprise wireless module integratedwith 4x4 MU-MIMO 5GHz Single Band Wireless Module  with Pro+ Industrial grade extended temperature range and better radio signal parameters designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    DR9074 5G and 6E modules are available for order ! And special promo price for partners with MOQ100pcs is USD 60 per module only ! Nokia, facebook and many other already started to use this card to develop own WiFi 6 / WiFi 6E devices! 

    WIFI 6 (802.11AX) 4X4 MU-MIMO 5GHZ SINGLE BAND WIRELESS MODULE  Pro+ MODEL PN02.1

    KEY FEATURES
    • Qualcomm Atheros QCN 9074 / 9024 Reference Design PN02.1
    • 5GHz, max 23dBm per chain, up to 4949Mbps
    • Single Band 5GHz 4×4 WiFi 6 (802.11ax)
    • 4 spatial streams (4SS)
    • M.2 E Key Interface
    • PCI Express 3.0 Interface
    • Supports Dynamic Frequency Selection (DFS)

    Chipset Qualcomm Atheros QCN 9074 / 9024

    Informations regarding Linux and OpenWRT drivers - The ath11k code from github can't support the dual / tri band card now, it needs modification. Wallystech and 524WiFi did some changes and applied in Linux kernel version 5.17.0 - if you use different kernel version, then 524WiFi will do some work for you. That is a Linux issue, there are some incompatible with different kernel versions. So the Customer need tell us the kernel version, then we release the ath11k and board-2.bin, bdf and amss.bin to customer - all is binary. Jason, chief of development, told us : "We will build it based on the Customer's Linux version, The kernel should be 5.17 up. The Card can be AP or Client mode on x86. We do it better than others, DR9074 Triband and Dualband cards are very good and its is powerfull opportunity for all customers developing WiFi6 devices. We have software engineers and we we have resources to support all Customers tu use our WiFI6 modules"

    Please read : https://www.524wifi.com/index.php/qcn9074-linux-guide/

    Learn More
  4. 5G M.2 WWAN card to RJ45 adapter dongle with SIM slot for 5GNR M.2 modules 5GNR 5G 4G modems compatible - Quectel RM500Q RM502Q RM510Q SIMCOM8200 4G M.2 Sierra Wireless etc

    $59.90

    5G WWAN Card To RJ45 Adapter With SIM SloT

    Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 . Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended. 

    The product is compact, plug and play, no need to install drivers. just plug in the pre-configured  5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

    The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
    The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

    User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can configure the 5G module by AT commands

    Learn More
  5. 5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE

    From: $155.50

    To: $2,715.46

    Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform).

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

    New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  6. 5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case

    $129.00

    Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware)  - this version is EOL, please use version 7 now !

    The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G now includes:

    • 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
    • 4 x WiFi  Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed). 
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
    • Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
  7. 5G USB 3.0 dongle 1 SIM bay for 5GNR M.2 modules 5GNR 5G 4G modems compatible - Quectel RM500Q RM510Q SIMCOM8200 4G M.2 Sierra Wireless etc

    $52.00

    -------Tis device is EOL, please use newer version - LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design ---------

    M.2 (NGFF) Key B to USB3.0 " USB DONGLE type " adapter nano metal box 119x69x21mm with 1 Sim Card Slot for 5GNR M.2 Quectel RM500Q RM510Q SIMCOM8200 and others 52mm length 5GNR modem cards 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G etc

    USB stick means this device is USB3 to NGFF M.2 Key B for use behind a PC or router via a USB port (plug&play) 

    Main features: - Full-speed USB 3.0 data speed (4.8Gbps) - SIM card and USB ESD protection - add new Voltage regulator

    - High-quality current inductance and Solid capacitor (1000μF)
    - Additional Power supply connector Introduce.
    - Aux Volt input support 5V
    - Metal body case conduct the Heat.
    - Mounting Hole for Flat or Mount.

    V4 version - New feature:

    A - Use new Power IC ,more stable than previous version.

    B - addd New USB ESD protection,

    C - 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)

    D - adjust output to 3.8V,Prevent high data transfer voltage drop.

    E - adjust AUX input  (5V~12V)

    It's 5Gnr  version, support New 5G M.2 size (52cm length) with 6 antenna hole 

    The adapter uses a full sized SIM Card . Two MHF4 to SMA female bulkhead (1.13 cables) pigtails (to connect the M.2 modem to the antennas) are included.

    The USB 3.0 A Male to Micro-B Male plug provides a durable and solid connection to the enclosure. The data power cable is 40cm long .

    USB3.0 (4.8Gbps) boasts of providing Ten Times the capability of USB 2.0. It also provides 900mA power as opposed to 500mA utilized thru USB 2.0. Type A connectors are are backwards compatible to USB 2.0 and/or USB 1.1. 524wifi.com

    The enclosure is also equipped with an extra Micro USB power port for applications where additional (dual) power is required.

    Aux DC input 5V input and 3.6V 3A output for M.2 device, use industry voltage regulator and capacitance to make 5GNR & 4G LTE modem work stable.

    Sim slot with ESD protection

    The enclosure can used on a desktop or mounted to a wall.

    The metal body case is good for heat radiation, pocket size 119x69x21mm , cable lenght 400mm

    The USB3 to NGFF M.2 Key B adapter enclosure is a useful device for connecting a 1pc 4G LTE M.2 (42mm modem lenght card) or 1pc 5GNR NGFF M.2 52mm length modem card ( 5GNR M.2 modem Quectel RM500Q RM510Q simcom 8200 and 4G M.2 Sierra Wireless EM series like EM7565, EM7455, EM73xx and Quectel EM06 EM20G EM12G ) behind a PC or router via a USB port. please note, 5GNR or 4G lte M.2 Modem is not included, you have to buy separately

    Learn More
  8. Compex WLE3000H5 QCN 9024 WiFi 6 802.11ax 4x4 MU-MIMO 5Ghz single band mini PCIe module

    $199.00

    Key benefits

    • Qualcomm Atheros QCN9024 chipset

    • 5Ghz, 4x4 MU-MIMO OFDMA technology, up to 4804Mbps PHY rate

    • Single band 5Ghz 4x4 Wi-fi 6 (802.11ax)

    • mPCIe interface with PCIe 3.0

    • Heat sink allows free air operation

    • Designed for High Bandwidth Enterprise Wireless Access Points

    Available for orders - lead time is 2-3 weeks, par no WLE3000H5 7A0924S Learn More
  9. COMPEX WLE3002HX 11ax 2x2 mini PCIe 3.0 dual band selectable WiFi 6 radio module, Qualcomm, Atheros, QCN9024, QCN6024, QCN6023 Pine series, Compex

    $129.00

    Key benefits

    • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset

    • 2,4GHz, 2x2 MU-MIMO OFDMA up to 573Mbps PHY rate

    • 5GHz, 2x2 MU-MIMO OFDMA up to 2402Mbps PHY rate

    • Dual band selectable Wifi 6 (802.11ax)

    • mPCIe interface with PCIe 3.0

    • Heat sink allows free air operation

    • Designed for High Bandwidth Enterprise Wireless Access Points

    Samples available for order with 2 weeks lead time - the only available part no is WLE3002HX 7A0624S

    Learn More
  10. COMPEX WLE3003HX 11ax 3x3 mini PCIe 3.0 dual band selectable WiFi 6 radio module, Qualcomm, Atheros, QCN9024, QCN6024, QCN6023 Pine series, Compex

    $150.00
    Key benefits • Qualcomm Atheros QCN6023/6024/9024 Pine series chipset • 2,4GHz, 3x3 MU-MIMO OFDMA up to 1032Mbps PHY rate • 5GHz, 3x3 MU-MIMO OFDMA up to 3603Mbps PHY rate • Dual band selectable Wifi 6 (802.11ax) • mPCIe interface with PCIe 3.0 • Heat sink allows free air operation • Designed for High Bandwidth Enterprise Wireless Access Points Learn More

    Out of stock

  11. DR-AP40x9-A WiFi 5 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR4029 IPQ4029 Board 2.4+ 5 GHz dipole Antennas, OpenWRT support, Wallys

    $139.00

    Description DR-AP40X9-A is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz

    ■ SMA Plug interface ■ Plastic rod of black

    ■ RoHS compliance Enclosure ■ Aluminum alloy material, FCC ID is 2AG7VDR4029

    Dimension: 132x 119 x 34 mm

    ■ Our Firmware supports all the modules of Quectel

    Support Openwifi

    Support QSDK

    Support Openwrt

      

    Learn More
  12. DR-AP6018-A WiFi 6 2x2 2.4GHz & 5GHz high power Dual Radio AP Router DR6018 (IPQ6018) Board 802.11ax, dipole Antennas, enclosure, Wallys, OpenWRT

    $165.00

    Description

    DR-AP6018-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR6018(IPQ6018) Board;2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 192x 123 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard and OpenWRT and OpenWiFi firmware

    QCN9074-6E with DR6018 Platform: Achieving 1.5Gbps Speed in Throughput Test!

    Learn More
  13. DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT

    $149.00

    DR-AP6018-S-A WiFi 6 2x2 2.4GHz & 5GHz dual band high power Radio AP Router including Wallys DR6018 S board (IPQ6010), 802.11ax, OpenWRT firmware and OpenWiFi supported

    2 x 2.4G&5G dipole Antennas; 1 x PSU(DC power or PoE); 1 x Enclosure.

    Dipole antenna ■ 2 x 2.4G&5G Antenna ■ 5dBi 2.4GHz/5Ghz ■ SMA Plug interface

    ■ Plastic rod of black ■ RoHS compliance Enclosure ■ Dimension: 133x 128 x 44 mm

    ■ Aluminum alloy material ■ Support Wallys’ PCBA Mainboard

    Learn More
  14. DR4029 LV IPQ 4029 Dakota 716MHz ARM7 CPU / 2x GE Port / Dual Band 802.11ac Wave 2 MU-MIMO, LTE Gateway, Multi-function Embedded Board with on-board WiFi

    $89.00

    IPQ 4019 / 4029  Dual Band 802.11ac wave2 MU-MIMO Onboard WiFi Radio Embedded Board

    • Featuring with industrial-grade IPQ4019/IPQ4029 chipset 
    • Integrated with 2x 2 5G high power Radio module and 2x2 2.4G high power Radio module 
    • Support 4.940GHz to 5.825GHz Frequency Range
    • Support 2.400GHz to 2.482GHz 
    • Support 2 x 5G MMCX Connectors and 2x2.4G MMCX 
    • Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth 
    • Support 11ABGN/AC 
    • RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
    • FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
    • Our Firmware supports all the modules of Quectel, updated HW version v4 with better SIM slots. Default login root / asdf1234
    • USB 3.0 support ! miniPCIe LTE-A module supprted !
    • Support Openwifi  Support QSDK  Support Openwr

    • Exciting News: Wallys WiFi 6 Card #DR9074E Now Compatible with DR4019 Platform (WiFi 5) and OpenWrt Driver - A Game-Changer in Wireless Tech!

    Learn More
  15. Dream 5018 M 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys

    $89.00

    Dream 5018 M - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 2* GE Ports, SIM slot, 2x M.2 card slot

    Samples are available now!

     11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

    Dual-core ARM 64bit A53@1.0GHz Processor

    1G DDRL3L System Memory

    8MB NOR Flash, 256MB NAND Flash

    2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

    M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

    M.2 Card Slot for QCN9074 WIFI 6E Card

    M.2 Card Slot for QCN6122-6E Card

    M.2 Card Slot for QCN6102-5GCard

    Support Openwifi

    DR5018M based on IPQ5018 chipset is an enterprise wireless module integrated with BT5 .1 Radio module and 2x2 2.4 G high power Radio module designed specifically to provide users with mobile  access to high - bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.

    Optional : With radio card DR6102-5G, you can get access to 5G radio . If you need to use 6GHz for your application, please use DR6122-6E radio card. 

    Learn More
  16. Dream 5018 S 802.11AX 2x2 MU-MIMO OFMDA Multifunction EMBEDDED BOARD, Qualcomm IPQ 5018, WiFi 6, Wallys

    $89.00

    DR5018 S - Multi-function IPQ 5018 Embedded Board with on-board WiFi 2,4GHz 802.11ax 2x2 MU-MIMO OFDMA / 4* GE Ports, SIM slot, 2x M.2 card slot

    Samples are available now!

     11AX 2x2 MU-MIMO OFDMA SINGLE BAND plus another slot for DUAL CONCURRENT, EMBEDDED BOARD with LTE Gateway support

    Features:

    Dual-core ARM 64bit A53@1.0GHz Processor

    512MB DDRL3L System Memory, 4MB NOR Flash, 128MB NAND Flash

    2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

    Support BT5.1

    M.2 Card Slot for 5G (QUECTEL RM 5xx modules supported) ;

    M.2 Card Slot for QCN9074 WIFI 6E Card - Support: QCN9074 WiFi 6E Card in M.2 slot

    POE 802.3 bt,at,af support

    Support Openwifi

    Product Description

    DR5018 based on IPQ5018 chipset is an enterprise wireless module integrated with BT5.1Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high - bandwidth video streaming, voice, and data transmission for office and challenging RFenvironment in factories, warehouses establishment

    Learn More
  17. EC25-AF Quectel EC25 Series, LTE Cat 4, miniPCIe module, M2M IoT 4G

    $49.90
    EC25-AF FA Mini PCIe  /this is older version for US region only with 2 weeks leadtime, please check newer global version EG25-G recommended as replacement and fro global use/
    • LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71
    • WCDMA: B2/B4/B5
    • North America: Verizon/AT&T/ T-Mobile/U.S. Cellular Canada: Rogers/Telus
    • Region: North America FirstNet
    • Can work in Wodaplug LTE routers !!

     

    Introduction of Quectel EC25 IOT/M2M-Optimized LTE Cat 4 Mini PCIe Module
      • Quectel EC25 Mini PCIe is a series of LTE category 4 module adopting standard PCI Express® Mini Card form factor (Mini PCIe). It is optimized specially for M2M and IoT applications, and delivers 150Mbps downlink and 50Mbps uplink data rates.
      • EC25 Mini PCIe contains 11 variants: EC25-E Mini PCIe, EC25-EU Mini PCIe, EC25-EUX Mini PCIe, EC25-J Mini PCIe, EC25-A Mini PCIe, EC25-V Mini PCIe, EC25-AF Mini PCIe, EC25-AFX Mini PCIe, EC25-MX Mini PCIe, EC25-AU Mini PCIe and EC25-AUX Mini PCIe. This makes it backward-compatible with existing EDGE and GSM/GPRS networks, ensuring that it can be connected even in remote areas devoid of 4G or 3G coverage.
      • EC25 Mini PCIe supports Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou/Compass, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning.
    • A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB serial drivers for Windows 7/8/8.1/10, Linux, Android/eCall*) extend the applicability of the module to a wide range of M2M applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance and digital signage.
     
    Learn More
  18. EM06-A EM06ALA-512-SGAD Quectel LTE-A M.2 - optimized 3GPP Rel. 11 LTE 2xCA Cat 6 Module , 5G+ ready, version North America

    $66.00

    LTE-A EM06 - A (North America version) - END OF LIFE - out of production, please use EM060K Global module instead. We still can deliver limited quantity with 2 weeks lead time and MOQ 10pcs

    Quectel EM06 is a series of LTE Advanced category 6 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers maximum data rates up to 300Mbps downlink and 50Mbps uplink.
    This version will be EOL soon, please use Global EM060K-GL M.2 modules  instead. We still can deliver limited quantity with 2-3 weeks lead time and MOQ 10+pcs

    Key Benefits

    ●  LTE-A Cat 6 module with M.2 form factor, optimized for M2M and IoT applications
    ●  Support LTE-A carrier aggregation
    ●  Worldwide LTE-A and UMTS/HSPA(+) coverage
    ●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    ●  Feature refinements: supports DFOTA and DTMF
    ●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

    Can work well in our Wodaplug LTE routers !!

    Learn More
  19. EM06-E EM06ELA-512-SGAD Quectel LTE-A M.2 - optimized 3GPP Rel. 11 LTE 2xCA Cat 6 Module , 5G+ ready, version Europe

    $66.90

    LTE-A EM06-E (Europe / EMEA / Brazil version) - END OF LIFE - out of production, please use EM060K Global module instead - last few modules available for delivery in 2 weeks lead time

    Quectel EM06 is a series of LTE Advanced category 6 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers maximum data rates up to 300Mbps downlink and 50Mbps uplink.
    This version will be EOL, please use EM060K-GL M.2 modules  instead (GLOBAL)

    Key Benefits

    ●  LTE-A Cat 6 module with M.2 form factor, optimized for M2M and IoT applications
    ●  Support LTE-A carrier aggregation
    ●  Worldwide LTE-A and UMTS/HSPA(+) coverage
    ●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    ●  Feature refinements: supports DFOTA and DTMF
    ●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

    Can work perfectly with our Wodaplug LTE routers !!

    Learn More
  20. EM12-G EM12GPA-512-SGAD Quectel LTE-A M.2 - optimized LTE advanced 3 x CA Cat 12 Module ( global ), 5G+ ready

    $89.00

    Special Price $79.99

    Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. De-signed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future Cat 16 module EM16, which will facilitate customers to migrate between different categories. SDX20 chipset

    Special price now - new, not used modules, original packing !

    Key Benefits

    ●  LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
    ●  Support DL 3x carrier aggregation and 256QAM
    ●  Worldwide LTE-A and UMTS/HSPA+ coverage
    ●  Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    ●  Feature refinements: supports DFOTA and VoLTE
    ●  MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

    Learn More
  21. EM20-G Quectel LTE-A M.2 IoT/M2M DL 7xCA Cat 20 Module ( global ) , 2GBit / 150MBit 5G+ ready

    $209.99

    LTE-A EM20-G module is EOL - please use EM12-G or EM16-G

    * LTE-A Cat 20 module with M.2 form factor, optimized for eMBB and IoT applications (Can work with our LTE 5G ready routers)
    * Form factore: M.2
    * Platform: Qualcomm’s SDX24 chipset
    * LTE standard: 3GPP Rel. 13
    * Support DL 7x carrier aggregation and 256QAM
    * Worldwide LTE-A and UMTS/HSPA+ coverage
    * Support PCIe standard interface for PC/Laptop application
    * Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
    * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
    * GNSS Integrated: Yes
    * GNSS Standard: GPS, GLONASS, BeiDou, Galileo
    * LTE/4G Band: 524wifi.com
    - LTE FDD (B1/B2/B3/B4/B5/B7/B8/B12/B13/ B14/B17/B18/B19/B20/B25/B26/B28/B29/B30/B66)
    - LTE TDDB38/39/B40/B41/B42/B43/B46(LAA)/B48(CBRS)
    * IoT: Yes
    * MIMO: Yes, 4 x 4 MIMO
    * Download Data rate: 2 Gbps
    * UplinkData rate: 150 Mbps
    * Size: 2.0×30.0×2.3 mm
    Learn More

    Out of stock

  22. EM7455 AirPrime Sierra wireless Module M.2, LTE-A CAT 6, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, CDMA, GNSS

    $39.90
    Ideal for industrial M2M and mobile computing solutions, the AirPrime ® EM7455 DE5811E embedded module delivers high speed connectivity, with a wide selection of advanced air interfaces, including LTE Advanced with carrier aggregation. The EM7455 support LTE bands targeted at the North America and EMEA regions. Based on the PCI Express M.2 standard with USB 3.0 and USB 2.0 interfaces, the EM7455 module offers an easy upgrade path to new network technologies and global access to high speed networks.
    It provides LTE-FDD, LTE-TDD, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, and GNSS connectivity for networking, and M2M applications over several radio frequency bands LTE: B1, B2, B3, B4, B5, B7, B12, B13, B20, B25, B26, B29, B30, B41 & HSPA+, UMTS: B1, B2, B3, B4, B5, B8 and supports 3G roaming, GPS: GPS, Glonass, Beidou, Galileo, Cariers officially supported: AT&T, Bell, Rogers, Sprint, Telus, US Cellular, Verizon, Vodafone ( please always check actual list as providers are continuously added ) Learn More
  23. LTE 5G M2 USB 3.0 dongle Dev kit MH2U V2 design for Sierra wireless EM919x EM7690 Telit FN980 Thales MV31 Quectel RM500, RM502, RM520, SIM slot

    $52.00

    USB 3.0 dongle - total New design for latest 5Gnr M.2 Modem  Sierra wireless EM9190 EM9191 EM7690; Telit FN980 ; Thales MV31-W, Quectel  & Simcom Modem.

    • Support 52mm,50mm,42mm length  three size of 5G M.2 Modem.
    • Introduce integrated aluminum heat sink,make your 5G modem always cool.
    • Add New switch for Sierra Wireless EM9190 EM9191 EM7690, switch will let modem work at USB mode.
    • 2 Step electric capacity at Output side,(input 16V 220μF,output 16V 220μF+6.3V 820μF)
    • Adjust output to 3.7V. Prevent voltage drop when high data transfer .
    • Add 5V DC AUX port, Max support 5V 4A power adapter, provider 20W power for 5G modem.
    • Use Nano SIM card slot , support hot swap simcard.
    • ESD prtection at USB and SIM slot.
    • Better performance, because of fast thermal module
    Learn More
  24. M.2 B Key to Mini PCI-E 5G modules PINS compatible Adapter Converter Card with SIM Card Slot for Quectel, SIMCom etc.

    $15.99

    M.2 B Key specialy modified for 5G modules PIN to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless, Quectel, Telit or SIMCom modems  by wodaplug.com which is compex & wodaplug LTE boards compatible with sierra wireless, Quectel, SIMCom or other modems (modules). Module size 3050 524wifi.com

    Please see PIN chart diagram picture to check, if its compatible with your 5G module

    Learn More
  25. M.2 B Key to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless , Quectel modem or SIM by wodaplug.com

    $11.99

    M.2 B Key to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless modem or SIM by wodaplug.com which is Compex & wodaplug LTE boards compatible with sierra wireless or other modems (modules)

    M.2 NGFF To MiniPCIe Adapter Connector Fit for EM12-G EM7411 EM7421 EM7565 EM7511 EM7690 EM06 , SIM 8202 (M.2 key B 3042)
     
    M.2 to minipcie Board NGFF to minipcie adapter board, M.2 B key,interface, NGFF kit For ME936 MU736 EM7035 EM7355 EM7455 EM7430 EM7565 EM7511 : EM05 EM06 EM12 and other modules Suitable for WCDMA LTE Module. Also tested with SIMCom SIM 8202 (M.2 key B 3042)
    Features: Supports 3G, 4G LTE network.
    Suitable for PC with Mini PCI-E port.
    Insert 3G, 4G network adapter module for communication.
    NGFF slot type: M.2 B Key
    Size : 3042
    Learn More
  26. MAXLINK 5+ internal triband 5dBi omnidirectional WiFi Antenna 2,4 - 5,8GHz, rSMA

    $12.90
    internal triband 5dBi omnidirectional dipol WiFi Antenna 2,4 + 5GHZ, rSMA Learn More
  27. Mediatek MTK 7621 High performance Outdoor router H721 O, Dual SIM with 5G NR LTE-A & WiFi possibility, 1x LAN 1x WAN, 4x antena 1x M.2 USB3, 1x MiniPCIe, good outdoor enclosure, OpenWRT

    $169.00

    Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported

    After makeing  H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master

    https://openwrt.org/toh/hwdata/dual-q/dual-q_h721

    https://downloads.x-wrt.com/rom/x-wrt-24.01-b202401051651-ramips-mt7621-dual-q_h721-squashfs-sysupgrade.bin

    Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721O 5G NR outdoor version now includes:

    • outer board*1;  water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G

    Hardware: 

    MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    1x M.2 b.key USB 3.0 as 5Gnr interface,

    1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)

    2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)

    Lightning protection design

     Heat sink at botoon of 5Gnr modem

    NEW X-WRT firmware available !!!

     

    Learn More
  28. mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, Rooter and OpenWRT firmware support, no USB port

    $69.90

    Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

    Max. LAN Data Rate: 867Mbps

    Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

    Wi-Fi Supported Frequency: 2.4G & 5G

    Wi-Fi Transmission Standard: 802.11ac

    Wired Transfer Rate: 10/100/1000Mbps

    2.4G Wi-Fi Transmission Rate: 300 Mbps

    Encryption Type: WPA-PSK

    Function: FireWall, QoS, VPN

    LANPorts:4 WAN Ports:1

    Certification: FCC CE

    5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

    Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs), Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

    Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

    Since the USB chip out of stock during long period, so the factory produced a batch of WG1608 routers without USB port.

    Learn More
  29. mtk 7621 ZBT WG1608-5G truly 5G 4G LTE metal body dual band wifi router, 2.4GHZ + 5GHz, USB 3.0 port, Rooter and OpenWRT firmware supported

    $69.90

    Newer mtk 7621 ZBT WG1608-5G truly 5G 4G LTE 2.4 5 Ghz metal body wifi router with best Rooter firmware, 7 antennas and power adapter included

    Max. LAN Data Rate: 867Mbps

    Standards And Protocols: Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi 802.11g, Wi-Fi 802.11n

    Wi-Fi Supported Frequency: 2.4G & 5G

    Wi-Fi Transmission Standard: 802.11ac

    Wired Transfer Rate: 10/100/1000Mbps

    2.4G Wi-Fi Transmission Rate: 300 Mbps

    Encryption Type: WPA-PSK

    Function: FireWall, QoS, VPN

    LANPorts:4 WAN Ports:1

    USB 3.0 port: 1 included

    Certification: FCC CE

    5G Wi-Fi Transmission Rate: 867Mbps (limited by chipset peak speed)

    Product name: Wifi Router ZBT WG1608-5G with M.2 slot for CAT12 CAT16 4G 5G Module (module not included in - please order it separately based on your region and needs),  Quetel RM520N-GL module supported as well as RM502Q and other Quectel modules !

     

    Main Chipset: MT7621A (880MHz) Independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7613AEN FLASH/RAM: 16MB/256MB Interface: 1WAN+4LAN+1USB+1 Sim card slot+1 TF Port Protocol: 80.11ac / 802.11a / 802.11n / 802.11g / 802.11b Transmission rate: 1200Mbps 2.4G WIFI: 40MHz, 2x2 MIMO5.8GWIFI: 80MHz, 2x2 MU-MIMO Support: M.2 (4G and 5G choose one - 4G/5G module not included, please order it separately based on your region and needs)

    Learn More
  30. MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT

    $139.00

    Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.

    The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).

    Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

    The H721 v5G version 7 now includes:

    • 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
    • 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
    • 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) . 
    • 12 Volt 2Amp Power Adapter
    • 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
    • Wall mounts, screws and lags
    • Cat5e Ethernet Cable
    • THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
    • Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
    • it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
    • Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great

    Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)

    4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem

    2 * Mini Pcie  for wifi card 3.3V and 5V output,  14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use 

    4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A

    New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ

    Software :

    we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)

    Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

    New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888

    Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

    You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files 

    Learn More
Name
Set Descending Direction

Grid List

30 per page

Items 1 to 30 of 70 total

Page:
  1. 1
  2. 2
  3. 3