Search results for 'wodaplug.com'
-
Mediatek MTK 7621 High performance Outdoor router H721 O, Dual SIM with 5G NR LTE-A & WiFi possibility, 1x LAN 1x WAN, 4x antena 1x M.2 USB3, 1x MiniPCIe, good outdoor enclosure, OpenWRT
$169.00Wodaplug ® Outdoor 5G 5GNR 4G LTE-A single module router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 1x LAN 1xWAN, 4 5G outdoor antennas, standalone: 1xM.2 USB3, 1xMiniPCIe, H721O can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). No modules included in, you need to order wifi and LTE 5G or 4G modules based on yoru needs, we will install and test all before shipment. High performance HW, new X-WRT high performance firmware ! OpenWRT supported
After makeing H721 5G router , we fount that signal is very import for 5Gnr or LTE-A . So we designed a new outdoor unit, we find a good outdoor enclosure (HW B222s-42a), H721O outdoor most design are follow H721 indoor, you can use H721 indoor firmware resource at openwrt or X-WRT master
https://openwrt.org/toh/hwdata/dual-q/dual-q_h721
Our new inventory of H721 routers were special ordered to better accommodate our customer’s needs. New improved 5G ready outdoor version ! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721O 5G NR outdoor version now includes:
-
outer board*1; water proof body case*1 ,700-5G PCB antenna ipex4 connector 25cm length *4, 4 L bracket & accessories ,POE is Huawei G
Hardware:
MTK7621A Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
1x M.2 b.key USB 3.0 as 5Gnr interface,
1x Minipcie for PCIE wifi (such as AR928x QCA988x DR7915 ...)
2x FF4 nano sim slot (2ed sim slot follow quectel modem requirement)
Lightning protection design
Heat sink at botoon of 5Gnr modem
NEW X-WRT firmware available !!!
Learn More
-
-
Wodaplug 5G 4G LTE Pigtail cable Ipex 4.0 head 1.20mm MHF4 6GHz Female / SMA Female 25cm, for M.2 modules
$5.99Wodaplug 5G 4G LTE Pigtail cable Ipex 4.0 head 1.20mm Ø0.81mm cable , frequency MHF4 6GHz Female / SMA Female 25cm, for M.2 modules with wide 1.5mm x height 0.6mm male ( quetel EM06 , EM12 , EM 20 , EM12-A , 5G RM500Q-GL etc.... )
Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.
Wodaplug 5G 4G LTE Ipex 4.0 Pigtail MHF4 Female / SMA Female 15cm thanks to new technologies compatible with new 5G & 4G modules as is EM06, EM12G , EM20G, RM500Q and many others M.2 LTE modules from quectel and Sierra Wireless and another brands
Learn More
-
Wodaplug Whip6 5G 4G LTE Antenna 700 / 800 / 900 / 1800 / 2100 / 2600 Mhz 6dBi SMA LTE male Connector - tuned
$9.99- Version 2021 : Gain Improvement. OmniDirectional Antenna 4G 5G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz Wodaplug whipe 1
- 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
- Gain 7-10dbi, SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
- Dimensions (cm) : 195mm, indoor, Operates between -40° and +60° c
- Specialy tuned for LTE 4G 5G frequencies
-
MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT
$139.00Wodaplug ® High performance Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform). New X-WRT high performance firmware ! OpenWRT support.
The H721 v5G Dual SIM 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and lates WiFi6 modules MT7915 / MT7916 (in X-WRT firmware).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G version 7 now includes:
- 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately - we recommend Pulse Larsen W5095X)
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed. you can install more WiFi antennas in) .
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM520N-GL RM500Q , RM502Q, RM510Q and Sierra wireless EM919x EM7690 in USB 3.0 mode.
- Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
Learn More4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
5G NR 4G Dual SIM dual modules ROUTER LTE-A MTK7621 4x LAN 1x WAN 12x antena 1x M.2 USB3 3x MiniPCIe H721 V5G 11n WiFi - BUNDLE
From: $155.50
To: $2,715.46
Wodaplug ® Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance Open Source router MTK7621 board HW version 7 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, MT7915 based 11ax WiFi 6 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform).
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules and WiFi 6 MT 7915/ 7916 modules (in new X-WRT firmeare).
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 3 x WiFi Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 - Based on Atheros AR9590 3x3 MIMO Platform ) - you can install second wifi module for dual radio application
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX, 600/900vx modules or MT7915 WiFi 6 modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM520N-GL RM500Q, RM502Q, RM520N and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 7 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
Learn More4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
New switch just for Sierra Wireless EM919x and EM7690, these card default work at PICE mode. We add new switch just let EM919x EM769x work at USB mode. Please see this video : https://www.youtube.com/watch?v=whKcn4SFMKQ
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support MT7915 802.11AX WiFi6 OpenWRT driver.
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html
New firmware can support load balance and fail over redundandcy - you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
-
5G / 4G PUK4615 3dB 700 - 2700 MHz omnidirectional antenna PUK type SMA
$25.99Specialy designed stable 3dB gain PUK omnidirection antenna for wild frequency range 700-2700 MHz for GSM 3G 4G or 5G use with LTE modules
Frequeny range: 700-2700 MHz
Bandwidth (MHz) 262/980MHZ
Input Impendence (Ω) 50
V.S.W.R ≤2 Gain (dBi) 3
Polarization Type Vertical polarization
Radiation Direction All (Omnidirectional)
Max Input Power (w) 50
Operating Temperature -20℃～+85℃
Storing Temperature -40℃～+85℃
Cable length (mm) 1000
Connector Type SMA
Dimension-mm Φ46*15
Learn More
-
Wodaplug M.2 (NGFF ) to USB 3.0 Computer Adapter with SIM Card Slot for LTE 5G Modules
$28.99- Designed for desktop/Laptop PCs that convert wireless M.2 Card to USB 3.0 port. Ideal for LTE 5G modules like RM500Q.
- You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
- Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, Sierra Wireless , quectel, Simcom
- Support 30*42 type NGFF(M.2) Key B card
- Support SIM 6pin/8pin card connector.
-
- Attention - can not support WiFi modules !
-
Wodaplug Whip3 3dBi Passive GSM LTE 5G 4G PCB FPC Antenna with pigtail i-pex4 for MHF4 M.2 LTE modules
$4.00Antenna for LTE application: Fabry-Perot cavity (FPC) antenna
Learn More
Connector Type I-Pex for IPEX MHF 4 connector
Cable Type 1.13
Impedance 50Ω
Polarization Linea
Frequency 700-2700MHZ
VSWR <1.5
Peak gain (dBi) 8dBi
Cable length 12cm
LTE 5G 4G Antenna
-
Wodaplug 1000 EOC Slave, 7.5Mhz-86Mhz / AV2, 1000Mbps, DS78LE, Indoor, 2xF, 4xLAN 100Mb Coax internet
$39.901000M EOC Salve (AV2), indoor, 2*F connector, 4*LAN 10/100Mb
This new MSTAR 510CE chip Homeplug AV2 based EOC Slave can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1000 AV2 EOC Master.
1000M EOC Slave is the terminal device in this system, it offers 4 FE ports, build L2 Ethernet transmission channel in the cable network, to transmit internet signal, but not affect the original CATV signal at the same time.
It has the advantages of long transmission distance, good network adaptability and high bandwidth.
Interested in test reports and datasheets ? Please visit http://wifi5.eu/dls/wodaplug.com/EOC-master-slave/Wodaplug1000_EOC/Unit can be configured via low level MStar tool v2.8. and set to work with any other EOC Master or Slave units. User can also configure it as a mini Master unit for small home network up to 8 slave devices. After configuration update using MStar tool it can work as Master mini unit and communicate with more Slave units.Learn More
-
Wodaplug 1000 EOC Master 7.5Mhz-86Mhz / AV2, 1000Mbps, DM1002+2A, Indoor, 4xF, 2xGE, WEB mngmt, MSE 1000, Coax internet
$199.00New 1000M EOC master (AV2), indoor, 2+2 *F connector, 2*LAN 10/100/1000Mb - samples available for testing
This new MSTAR MSE 1000chip Homeplug AV2 based EOC master can offer 500 Mbps real troughput over existing coax cable network for long range up to 1km. Can work together with Wodaplug 1000 AV2 EOC slaves.
WEB management and Console , Telnet CLI and SNMP based configuration.
Feature
-
Support +500M bandwidth when work in 7.5M-86Mhz/AV2 togtehr with Wodaplug 1000 EC slaves. HomePlug-AV P1901 standard
- RF Interface : 4 ports /2 TV input and 2 for TV+DATA output - two EOC chips
-
Support up to 50 connect end user slave modems in real environemt
- 1 or 2 GE RJ45 ports (network side interfence) , support ports flexibily be configured as business port or out-band management port
-
Interested in test reports and datasheets ? Please visit http://wifi5.eu/dls/wodaplug.com/EOC-master-slave/Wodaplug1000_EOC/
-
-
M.2 B Key to Mini PCI-E 5G modules PINS compatible Adapter Converter Card with SIM Card Slot for Quectel, SIMCom etc.
$15.99M.2 B Key specialy modified for 5G modules PIN to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless, Quectel, Telit or SIMCom modems by wodaplug.com which is compex & wodaplug LTE boards compatible with sierra wireless, Quectel, SIMCom or other modems (modules). Module size 3050 524wifi.com
Please see PIN chart diagram picture to check, if its compatible with your 5G module
Learn More
-
Learn More
PulseLarsen turbo GSM blade Antenna W5095X for 2G/3G/4G/5G Frequency 698-960/1400-1700/1710-2690MHz 2-5dB
$13.99PulseLarsen Antenna W5095x External Antenna with SMA Male LTE connector
PulseLarsen Antenna W5095x External Antenna are IP65 rated antennas with SMA male connector option. PulseLarsen Antennas . W5095x is a blade antenna featuring a 698 to 2690MHz frequency and 1 to 2.5dBi gain. W5095x is ideal for LTE radios, 2G/3G/4G/5G radios, gateways, set top boxes and security applications. These antennas are optimized for straight and 90 bent positions.W5095x:
1dBi to 2.5dBi gain
IP65
229mm (straight)
total length197.5mm (bent)
total length30.5mm width
Connector options: W5095K SMA male
524 LTE pure 5G Whip7 Antenna 600 - 6000 7dBi 5G NR: n41/n77/n78/n79 SMA LTE male Connector
Pure 5g Whipe7 7dBi
19cm lenght
5G NR: n41/n77/n78/n79 ( Tested module ：MH5000-31、SIM8200EA、RM500Q、
Support. : LTE-FDD: B1/B3/B5/B7/B8/B18/B19/B20/
LTE-TDD: B34/B38/B39/B40/B41/B42/B43
600-6000MHz
≤2.0 / 7DB / 50Ω / 50W / Length 19CM
Learn More
Wodaplug Whip3 3dBi Passive GSM LTE 5G 4G PCB FPC Antenna with pigtail i-pex for U.FL-R-SMT-1 modules
Antenna for LTE application: Fabry-Perot cavity (FPC) antenna
Connector Type I-Pex for U.FL-R-SMT-1 connector
Cable Type 1.13
Impedance 50Ω
Polarization Linea
Frequency 700-2700MHZ
VSWR <2.0
Peak gain (dBi) 8dBi
Cable length 12cm
LTE 5G 4G Antenna
Wodaplug Whip12 outdoor 5G 4G LTE Antenna 700 / 800 / 900 / 1800 / 2100 / 2600 Mhz 12dB SMA LTE male Connector
- Version 2021 : Gain Improvement. OmniDirectional Antenna 4G 5G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz
- 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for outdoor LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
- Gain 7-10dbi, SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
- Dimensions (cm) : 2000mm, water and wind resistant, Operates between -40° and +60° c
- Specialy tuned for LTE 4G 5G frequencies
- Cable lenght 2m (customisable 3m o 5m or 10m max)
- GE0006AA
Wodaplug Whip8 5G 4G LTE Antenna 700 / 800 / 900 / 1800 / 2100 / 2600 Mhz 8dBi SMA LTE male Connector
- Version 2021 : Gain Improvement. OmniDirectional Antenna 4G MIMO compatible with frequencies 698-960mhz and 1710-2700Mhz Wodaplug whipe 8
- 700Mhz, 800Mhz, 900Mhz, 1800Mhz, 2100Mhz, 2600Mhz. Recommended for LTE 4G 5G use : THE SPEED OF YOUR NETWORK CONNECTION DEPENDS ON THE NUMBER OF USERS CONNECTED ON EACH FREQUENCY AND THE MOBILE OPERATOR'S NETWORK, or Indoor, pole or other support
- Gain 7-10dbi, SMA male connector (MIMO), ideal for connecting to routers Huawei B525, B528 and B618 (with TS9-SMA adapter), B593, E5186, E5180 (with CRC9-SMA adapter), B310, B315, Asus, TP Link, Dlink, ZTE, Netgear and more
- Dimensions (cm) : 207mm, water and wind resistant, Operates between -40° and +60° c
- Specialy tuned for LTE 4G 5G frequencies
Wodaplug M.2 (NGFF) to USB 2.0 Computer Adapter with SIM Card Slot for WWAN/LTE/4G Module
- Designed for desktop/Laptop PCs that convert wireless M.2 Card to USB 2.0 port. Ideal for LTE 4G modules.
- You can insert your M.2 card (Socket 2 SSIC-base WWAN) such as GSM, HSPA(3.5G), GPS, LTE cards to this adapter then plug to USB port
- Supports USB interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, Mini Card to desktop/Laptop PC, such as, HUAWEI , Sierra Wireless , quectel
- Support 30*42 type NGFF(M.2) Key B card
- Support SIM 6pin/8pin card connector.
-
- Attention - can not support WiFi modules !
Wodaplug Mini PCI-E to USB Adapter with SIM Card Slot for WWAN/LTE modules for 3G / 4G Network Cards
Wodaplug USB adapter for miniPCIE 5G 4G LTE modules incl SIM bay
Supports USB bus interface of Mini-Cards such as 2G GSM, GPRS, 3G, CDMA, WLAN, WWLAN, HSPA MODEM, GPS, 4G WiMAX, LTE, 5G and Mini-Card to desktop PC
Easy installation & no driver required, but make sure you have installed the software drivers for your WWAN card.
Support SIM 6pin/8pin card connector.
No additional power required
Supports Plug & Play and Hot-Swapping
Attention - can not support WiFi modules !
Learn More
Wodaplug PC adapter for M.2 5G 4G LTE modules incl Pigtails, Antennas, USB PIN cable,
Wodaplug PC adapter for M.2 modules incl 2* LTE Pigtails, 2* LTE Antennas 4-5dBi, PC USB PIN cable, do not have SIM slot
This adapter enables you to use a NGFF (M.2) modem card in a PC slot. The adapter works in all systems with Mini PCI-E slot (eg. EmbeddedPC, CarPC, MiniPC, Laptop, TabletPC, Android, etc..)
it didnt have sim slot! Learn More
Wodaplug 5G 4G LTE Pigtail cable Ipex 4.0 head 1.20mm Ø0.81mm MHF4 6GHz Female / SMA Female 15cm, for M.2 modules
Wodaplug 5G 4G LTE Pigtail cable Ipex 4.0 head 1.20mm Ø0.81mm cable , frequency MHF4 6GHz Female / SMA Female 15cm, for M.2 modules with wide 1.5mm x height 0.6mm male ( quetel EM06 , EM12 , EM 20 , EM12-A , 5G RM500Q-GL etc.... )
Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.
Wodaplug 5G 4G LTE Ipex 4.0 Pigtail MHF4 Female / SMA Female 15cm thanks to new technologies compatible with new 5G & 4G modules as is EM06, EM12G , EM20G, RM500Q and many others M.2 LTE modules from quectel and Sierra Wireless and another brands
Learn More
Wodaplug 5G 4G LTE Pigtail U.FL-LP-040 cable Ipex 1.0 Female / SMA Female 15cm, for U.FL-R-SMT-1 miniPCIe modules
Wodaplug 5G 4G LTE Pigtail cable Ipex 1.0 U.FL-LP-040 for U.FL-R-SMT-1 connector Female / SMA Female 15cm, for miniPCIe modules
Specially designed and shielded for 5G 4G technology signal transfer to avoid loose or interference.
Wodaplug 5G LTE Ipex 1.0 Pigtail cable u.fl Female / SMA Female 15cm compatible with new 4G and 5G modules as is EC25, EP06, from quectell
Learn More
EM12-G EM12GPA-512-SGAD Quectel LTE-A M.2 - optimized LTE advanced 3 x CA Cat 12 Module ( global ), 5G+ ready
$89.00
Special Price $79.99
Quectel EM12-G is LTE Advanced category 12 module optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 12 LTE technology, it delivers M2M-optimized speeds of 600Mbps downlink and 150Mbps uplink peak data rates. De-signed in the M.2 form factor, EM12 is compatible with Quectel Cat6 module EM06 and future Cat 16 module EM16, which will facilitate customers to migrate between different categories. SDX20 chipset
Special price now - new, not used modules, original packing !
Key Benefits
● LTE-A Cat 12 module with M.2 form factor, optimized for eMBB and IoT applications
● Support DL 3x carrier aggregation and 256QAM
● Worldwide LTE-A and UMTS/HSPA+ coverage
● Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
● Feature refinements: supports DFOTA and VoLTE
● MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
SIGNAL SLM630B (MeiG) miniPCIe TD-LTE/FDD-LTE/TD-SCDMA/WCDMA/GSM Module, ufl connectors
SLM630 is a multi-mode LTE wireless module, via the general industrial standard interface, supports voice, SMS, data and GPS. Ultra low power consumption and extended temperature range, it can be designed in many kinds of applications, such as data card, video monitor, tablet,vehicle equipment. SLM630 is a mobile broadband access module, access rate can support:
·LTE：TD-LTE(61Mbps/18Mbps) ·LTE：FDD-LTE(100Mbps/50Mbps) ·3G：TD-SCDMA up to support TD-HSPA(4.2Mbps/2.2Mbps) ·3G：WCDMA up to support DC-HSPA+(42Mbps/5.76Mbps) ·2G：GSM up to support EDGE(236.8kbps/236.8kbps)
Can work well with Wodaplug LTE routers and SDK firmware ! Very cheap LTE 4G module with good performance for Europe !!
Learn More
M.2 B Key to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless , Quectel modem or SIM by wodaplug.com
M.2 B Key to Mini PCI-E Adapter Converter Card with SIM Card Slot for Sierra Wireless modem or SIM by wodaplug.com which is Compex & wodaplug LTE boards compatible with sierra wireless or other modems (modules)
5G NR 4G Dual SIM dual-Q modules ROUTER LTE-A MTK7621 4xLAN 1xWAN 12x antena 1xM.2 USB3 3xMiniPCIe H721 V5G 11ac WiFi metal case
Wodaplug ® Dual SIM Dual-Q 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 6 and higher, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, WiFI6 MT7915/ 7916 modules supported in new X-WRT firmware) - this version is EOL, please use version 7 now !
The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications. The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..
Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 6! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !
The H721 v5G now includes:
- 4 x 5G LTE Antennas + 4 x MHH4 pigtails for LTE modules pre-installed
- 4 x WiFi Antennas + 4 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
- 12 Volt 2Amp Power Adapter
- 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
- Wall mounts, screws and lags
- Cat5e Ethernet Cable
- THIS ROUTER IS NOT EQUIPED WITH GSM / LTE / WIFI modules, please order them separately based on your needs. For WiFi you can also use WLE200NX or 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest CAT12, CAT20 modules and also new 5G modules Quectel RM500Q , RM502Q and RM510Q
- Supports 5GNR 5G modules Quectel, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 16 LTE modules - it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
- it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
- Tuned FirmWare from 5G LTE HW experts - We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
Hardware: MTK7621A board version 6 - Flash16M / RAM256M(CPU Cores:2 ;CPU MHz:880)
4 *lan+1 * wan 10/100M/1000M RJ45 port , 1* M.2 (NGFF) key B for 5Gnr & LTE modem, 1*Minipcei for LTE Mini Pcie modem
2 * Mini Pcie for wifi card 3.3V and 5V output, 14 * led for display more information, 1*TF card slot, 12 * antenna hole for future use
4 stand alone slots (not shared!!): 2x Minipcei for wifi, 1xMinipcie(USB2.0) for 4G LTE, 1xM.2(USB3.0) for 5GNR and 4G LTE-A
Software :
we use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman has made firmware for this board. Support most ROOTer function and Fail over redundancy + Load ballance features for dual SIM applications. Support most LTE modem drivers (Sierra wireless,Quectel,Huawei,ZTE,Meig)
Router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware
New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888
Users guide, firmware, supported LTE modems and WiFi modules you will found on - http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/
You can use this link to commit your own firmware - https://github.com/openwrt/openwrt/pull/5076/files
MikroTik RB4011iGS-5HacQ2HnD-IN Dual Multi-WAN and load balancing
RB4011iGS+5HacQ2HnD-IN is Powerful 10 x Gigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ 10Gbps cage, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop case supporting Mikrotik RouterOS system + Multi - WAN, Load balancing inputs
Learn More
Wodaplug power backup unit for wi-fi, router, ADSL, LTE, mobile phones & powerbank - UPS 2 x 12v, 1 x 5V USB UPS 8800mAh
Product name ： Wodaplug.com micro power backup, UPS unit for router, powerbank for router , 2 x 12v, 1 x 5V USB UPS 8800mA WDPUPS1031-5V+12V+12V BSU
Global description
Never again reseting routers, loosing ADSL or wi-fi connection during micro power failures !! WDPUPS1031 can back-up up to 3 units in real time to make sure of ongoing power supply in real time. Router back up unit is designed to stand up to 24 hours * without external power with its unbelievable capacity 8800mA made from high quality brand 18650 Seiko batteries.
WDPUPS1031 for router backup is also made to be modular and users are able to replace old batteries when necessary. It is easy mountable to our micro LTE router but it can stand alone as well to power-up your ADSL router, Router, Wi-Fi or another 12V or 5V using unit.
Learn More
Wodaplug ® LTE router Multi-function QCA9531,E micro Board mini router metal case, 2x LAN /3G/UMTS/4G/5G/LTE gateway, PPPOE, dhcp-4G, M2M, miniPCIe, H5312
Wodaplug EOC Slave+11n 2x2 MIMO WiFi EOC1121R4WL-R410, 600Mbps, WiFi, 4*LAN, 2*F, WEB Management
Wodaplug EOC Indoor Slave with WiFi router with wifi speed 300Mbps - EOC1121R4WL-R410, 600Mbps, 4*LAN, 2*F, WEB Management, VLAN, IGMP, QoS ...
Description
Wodaplug EoC product is focused on the use of existing cable television (CATV) infrastructure for Internet access or broadband data transmission for the purpose of being compatible with the existing CATV (or sometimes satellite television) broadcast signals simultaneously transmitted on the same cable.
Two WiFi antennas - 802.11bgn device with 300Mbps 2x2 MIMO WiFi speed.
Learn More
Quectel EP06 miniPCIe - optimized LTE Cat 6 Module ver EP06-A (America), LTE-A ready
Variant for America : EP06-A
LTE-A CAT6 support ! END OF LIFE, SALE PRICE FOR LAST ONE MODULE. We recommend to use EM060K-GL module with adapter to miniPCIE - we can deliver it assembled for the same price.
LTE FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/
B29/B30/B66
LTE TDD: B41
2×CA: B2+B2/B5/B12/B13/B17/B26/B29;
B4+B4/B5/B12/B13/B17/B26/B29;
B25+B5/B12/B13/B17/B25/B26/B29;
B30+B5/B12/B17/B26/B29; B41+B41
(Note: B29 is only for secondary
component carrier)
WCDMA: B2/B4/B5
Data
LTE FDD: Max 300Mbps (DL), Max 50Mbps (UL)
LTE TDD: Max 226Mbps (DL), Max 28Mbps (UL)
DC-HSPA+: Max 42Mbps (DL), Max 5.76Mbps
(UL)
UMTS: Max 384Kbps (DL), Max 384Kbps (UL)
TD-SCDMA: Max 4.2Mbps (DL), Max 2.2Mbps
(UL)
LTE-A Cat.6 module with Mini PCIe form factor, optimized for
M2M and IoT applications
Support LTE-A carrier aggregation
Worldwide LTE, UMTS/HSPA+ and TD-SCDMA coverage
Multi-constellation GNSS receiver available for applications requiring
fast and accurate fixes in any environment
Feature refinements: supports DFOTA*, eCall* and DTMF
MIMO technology meets demands for data rate and link reliability
in modem wireless communication systems
Notice for SPRINT users : sprint is very special, currently, only sierra wireless LTE modem support it well. Quectel EP06A updated the new datasheet , they delete the band41 from it's support list, so EP06 not support sprint fully.
Learn More
$10 000 insurance per deal